diff mbox series

[RFC,V2,26/37] arm/virt: Changes to (un)wire GICC<->vCPU IRQs during hot-(un)plug

Message ID 20230926100436.28284-27-salil.mehta@huawei.com (mailing list archive)
State New, archived
Headers show
Series Support of Virtual CPU Hotplug for ARMv8 Arch | expand

Commit Message

Salil Mehta Sept. 26, 2023, 10:04 a.m. UTC 
Refactors the existing GIC create code to extract common code to wire the
vcpu<->gic interrupts. This function could be used with cold-plug case and also
used when vCPU is hot-plugged. It also introduces a new function to unwire the
vcpu<->gic interrupts for the vCPU hot-unplug cases.

Co-developed-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Co-developed-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
---
 hw/arm/virt.c          | 139 ++++++++++++++++++++++++++++-------------
 hw/core/gpio.c         |   2 +-
 include/hw/qdev-core.h |   2 +
 3 files changed, 99 insertions(+), 44 deletions(-)
diff mbox series

Patch

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index dce02136cb..5b829e47b7 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -714,6 +714,99 @@  static void create_v2m(VirtMachineState *vms)
     vms->msi_controller = VIRT_MSI_CTRL_GICV2M;
 }
 
+/*
+ * Mapping from the output timer irq lines from the CPU to the GIC PPI inputs
+ * we use for the virt board.
+ */
+const int timer_irq[] = {
+    [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
+    [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
+    [GTIMER_HYP]  = ARCH_TIMER_NS_EL2_IRQ,
+    [GTIMER_SEC]  = ARCH_TIMER_S_EL1_IRQ,
+};
+
+static void unwire_gic_cpu_irqs(VirtMachineState *vms, CPUState *cs)
+{
+    MachineState *ms = MACHINE(vms);
+    unsigned int max_cpus = ms->smp.max_cpus;
+    DeviceState *cpudev = DEVICE(cs);
+    DeviceState *gicdev = vms->gic;
+    int cpu = CPU(cs)->cpu_index;
+    int type = vms->gic_version;
+    int irq;
+
+    for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
+        qdev_disconnect_gpio_out_named(cpudev, NULL, irq);
+    }
+
+    if (type != VIRT_GIC_VERSION_2) {
+        qdev_disconnect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+                                       0);
+    } else if (vms->virt) {
+        qdev_disconnect_gpio_out_named(gicdev, SYSBUS_DEVICE_GPIO_IRQ,
+                                       cpu + 4 * max_cpus);
+    }
+
+    /*
+     * RFC: Question: This currently does not takes care of intimating the
+     * devices which might be sitting on system bus. Do we need a
+     * sysbus_disconnect_irq() which also does the job of notification beside
+     * disconnection?
+     */
+    qdev_disconnect_gpio_out_named(cpudev, "pmu-interrupt", 0);
+    qdev_disconnect_gpio_out_named(gicdev, SYSBUS_DEVICE_GPIO_IRQ, cpu);
+    qdev_disconnect_gpio_out_named(gicdev,
+                                   SYSBUS_DEVICE_GPIO_IRQ, cpu + max_cpus);
+    qdev_disconnect_gpio_out_named(gicdev, SYSBUS_DEVICE_GPIO_IRQ,
+                                   cpu + 2 * max_cpus);
+    qdev_disconnect_gpio_out_named(gicdev, SYSBUS_DEVICE_GPIO_IRQ,
+                                   cpu + 3 * max_cpus);
+}
+
+static void wire_gic_cpu_irqs(VirtMachineState *vms, CPUState *cs)
+{
+    MachineState *ms = MACHINE(vms);
+    unsigned int max_cpus = ms->smp.max_cpus;
+    DeviceState *cpudev = DEVICE(cs);
+    DeviceState *gicdev = vms->gic;
+    int cpu = CPU(cs)->cpu_index;
+    int type = vms->gic_version;
+    SysBusDevice *gicbusdev;
+    int ppibase;
+    int irq;
+
+    ppibase = NUM_IRQS + cpu * GIC_INTERNAL + GIC_NR_SGIS;
+
+    for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
+        qdev_connect_gpio_out(cpudev, irq,
+                              qdev_get_gpio_in(gicdev,
+                                               ppibase + timer_irq[irq]));
+    }
+
+    gicbusdev = SYS_BUS_DEVICE(gicdev);
+    if (type != VIRT_GIC_VERSION_2) {
+        qemu_irq irq = qdev_get_gpio_in(gicdev,
+                                        ppibase + ARCH_GIC_MAINT_IRQ);
+        qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
+                                    0, irq);
+    } else if (vms->virt) {
+        qemu_irq irq = qdev_get_gpio_in(gicdev,
+                                        ppibase + ARCH_GIC_MAINT_IRQ);
+        sysbus_connect_irq(gicbusdev, cpu + 4 * max_cpus, irq);
+    }
+
+    qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
+                                qdev_get_gpio_in(gicdev,
+                                                 ppibase + VIRTUAL_PMU_IRQ));
+    sysbus_connect_irq(gicbusdev, cpu, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
+    sysbus_connect_irq(gicbusdev, cpu + max_cpus,
+                       qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
+    sysbus_connect_irq(gicbusdev, cpu + 2 * max_cpus,
+                       qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
+    sysbus_connect_irq(gicbusdev, cpu + 3 * max_cpus,
+                       qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+}
+
 static void create_gic(VirtMachineState *vms, MemoryRegion *mem)
 {
     MachineState *ms = MACHINE(vms);
@@ -809,47 +902,7 @@  static void create_gic(VirtMachineState *vms, MemoryRegion *mem)
      * and the GIC's IRQ/FIQ/VIRQ/VFIQ interrupt outputs to the CPU's inputs.
      */
     for (i = 0; i < smp_cpus; i++) {
-        DeviceState *cpudev = DEVICE(qemu_get_cpu(i));
-        int ppibase = NUM_IRQS + i * GIC_INTERNAL + GIC_NR_SGIS;
-        int irq;
-        /* Mapping from the output timer irq lines from the CPU to the
-         * GIC PPI inputs we use for the virt board.
-         */
-        const int timer_irq[] = {
-            [GTIMER_PHYS] = ARCH_TIMER_NS_EL1_IRQ,
-            [GTIMER_VIRT] = ARCH_TIMER_VIRT_IRQ,
-            [GTIMER_HYP]  = ARCH_TIMER_NS_EL2_IRQ,
-            [GTIMER_SEC]  = ARCH_TIMER_S_EL1_IRQ,
-        };
-
-        for (irq = 0; irq < ARRAY_SIZE(timer_irq); irq++) {
-            qdev_connect_gpio_out(cpudev, irq,
-                                  qdev_get_gpio_in(vms->gic,
-                                                   ppibase + timer_irq[irq]));
-        }
-
-        if (vms->gic_version != VIRT_GIC_VERSION_2) {
-            qemu_irq irq = qdev_get_gpio_in(vms->gic,
-                                            ppibase + ARCH_GIC_MAINT_IRQ);
-            qdev_connect_gpio_out_named(cpudev, "gicv3-maintenance-interrupt",
-                                        0, irq);
-        } else if (vms->virt) {
-            qemu_irq irq = qdev_get_gpio_in(vms->gic,
-                                            ppibase + ARCH_GIC_MAINT_IRQ);
-            sysbus_connect_irq(gicbusdev, i + 4 * max_cpus, irq);
-        }
-
-        qdev_connect_gpio_out_named(cpudev, "pmu-interrupt", 0,
-                                    qdev_get_gpio_in(vms->gic, ppibase
-                                                     + VIRTUAL_PMU_IRQ));
-
-        sysbus_connect_irq(gicbusdev, i, qdev_get_gpio_in(cpudev, ARM_CPU_IRQ));
-        sysbus_connect_irq(gicbusdev, i + max_cpus,
-                           qdev_get_gpio_in(cpudev, ARM_CPU_FIQ));
-        sysbus_connect_irq(gicbusdev, i + 2 * max_cpus,
-                           qdev_get_gpio_in(cpudev, ARM_CPU_VIRQ));
-        sysbus_connect_irq(gicbusdev, i + 3 * max_cpus,
-                           qdev_get_gpio_in(cpudev, ARM_CPU_VFIQ));
+        wire_gic_cpu_irqs(vms, qemu_get_cpu(i));
     }
 
     fdt_add_gic_node(vms);
@@ -3064,7 +3117,7 @@  static void virt_cpu_pre_plug(HotplugHandler *hotplug_dev, DeviceState *dev,
      */
     if (vms->acpi_dev) {
         /* TODO: update GIC about this hotplug change here */
-        /* TODO: wire the GIC<->CPU irqs */
+        wire_gic_cpu_irqs(vms, cs);
     }
 
     /*
@@ -3148,7 +3201,7 @@  static void virt_cpu_unplug(HotplugHandler *hotplug_dev, DeviceState *dev,
 
     /* TODO: update the acpi cpu hotplug state for cpu hot-unplug */
 
-    /* TODO: unwire the gic-cpu irqs here */
+    unwire_gic_cpu_irqs(vms, cs);
     /* TODO: update the GIC about this hot unplug change */
 
     /* TODO: unregister cpu for reset & update F/W info for the next boot */
diff --git a/hw/core/gpio.c b/hw/core/gpio.c
index 80d07a6ec9..abb164d5c0 100644
--- a/hw/core/gpio.c
+++ b/hw/core/gpio.c
@@ -143,7 +143,7 @@  qemu_irq qdev_get_gpio_out_connector(DeviceState *dev, const char *name, int n)
 
 /* disconnect a GPIO output, returning the disconnected input (if any) */
 
-static qemu_irq qdev_disconnect_gpio_out_named(DeviceState *dev,
+qemu_irq qdev_disconnect_gpio_out_named(DeviceState *dev,
                                                const char *name, int n)
 {
     char *propname = g_strdup_printf("%s[%d]",
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index 884c726a87..992f5419fa 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -739,6 +739,8 @@  qemu_irq qdev_get_gpio_out_connector(DeviceState *dev, const char *name, int n);
  */
 qemu_irq qdev_intercept_gpio_out(DeviceState *dev, qemu_irq icpt,
                                  const char *name, int n);
+qemu_irq qdev_disconnect_gpio_out_named(DeviceState *dev,
+                                               const char *name, int n);
 
 BusState *qdev_get_child_bus(DeviceState *dev, const char *name);