@@ -712,14 +712,13 @@ static void esp_do_nodma(ESPState *s)
switch (esp_get_phase(s)) {
case STAT_MO:
- /* Copy FIFO into cmdfifo */
- n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
- n = MIN(fifo8_num_free(&s->cmdfifo), n);
- fifo8_push_all(&s->cmdfifo, buf, n);
- s->cmdfifo_cdb_offset += n;
-
switch (s->rregs[ESP_CMD]) {
case CMD_SELATN:
+ /* Copy FIFO into cmdfifo */
+ n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
+ n = MIN(fifo8_num_free(&s->cmdfifo), n);
+ fifo8_push_all(&s->cmdfifo, buf, n);
+
if (fifo8_num_used(&s->cmdfifo) >= 1) {
/* First byte received, switch to command phase */
esp_set_phase(s, STAT_CD);
@@ -734,6 +733,11 @@ static void esp_do_nodma(ESPState *s)
break;
case CMD_SELATNS:
+ /* Copy one byte from FIFO into cmdfifo */
+ n = esp_fifo_pop_buf(&s->fifo, buf, 1);
+ n = MIN(fifo8_num_free(&s->cmdfifo), n);
+ fifo8_push_all(&s->cmdfifo, buf, n);
+
if (fifo8_num_used(&s->cmdfifo) >= 1) {
/* First byte received, stop in message out phase */
s->rregs[ESP_RSEQ] = SEQ_MO;
@@ -746,6 +750,11 @@ static void esp_do_nodma(ESPState *s)
break;
case CMD_TI:
+ /* Copy FIFO into cmdfifo */
+ n = esp_fifo_pop_buf(&s->fifo, buf, fifo8_num_used(&s->fifo));
+ n = MIN(fifo8_num_free(&s->cmdfifo), n);
+ fifo8_push_all(&s->cmdfifo, buf, n);
+
/* ATN remains asserted until FIFO empty */
s->cmdfifo_cdb_offset = fifo8_num_used(&s->cmdfifo);
esp_set_phase(s, STAT_CD);
The contents of the FIFO should only be copied to cmdfifo for ESP commands that are sending data to the SCSI bus, which are the SEL_* commands and the TI command. Otherwise any incoming data should be held in the FIFO as normal. This fixes booting of NetBSD m68k under the Q800 machine once again. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> --- hw/scsi/esp.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-)