@@ -562,5 +562,96 @@ struct kvm_pmu_event_filter {
#define KVM_X86_DEFAULT_VM 0
#define KVM_X86_SW_PROTECTED_VM 1
+#define KVM_X86_TDX_VM 2
+#define KVM_X86_SNP_VM 3
+
+/* Trust Domain eXtension sub-ioctl() commands. */
+enum kvm_tdx_cmd_id {
+ KVM_TDX_CAPABILITIES = 0,
+ KVM_TDX_INIT_VM,
+ KVM_TDX_INIT_VCPU,
+ KVM_TDX_INIT_MEM_REGION,
+ KVM_TDX_FINALIZE_VM,
+ KVM_TDX_RELEASE_VM,
+
+ KVM_TDX_CMD_NR_MAX,
+};
+
+struct kvm_tdx_cmd {
+ /* enum kvm_tdx_cmd_id */
+ __u32 id;
+ /* flags for sub-commend. If sub-command doesn't use this, set zero. */
+ __u32 flags;
+ /*
+ * data for each sub-command. An immediate or a pointer to the actual
+ * data in process virtual address. If sub-command doesn't use it,
+ * set zero.
+ */
+ __u64 data;
+ /*
+ * Auxiliary error code. The sub-command may return TDX SEAMCALL
+ * status code in addition to -Exxx.
+ * Defined for consistency with struct kvm_sev_cmd.
+ */
+ __u64 error;
+};
+
+struct kvm_tdx_cpuid_config {
+ __u32 leaf;
+ __u32 sub_leaf;
+ __u32 eax;
+ __u32 ebx;
+ __u32 ecx;
+ __u32 edx;
+};
+
+struct kvm_tdx_capabilities {
+ __u64 attrs_fixed0;
+ __u64 attrs_fixed1;
+ __u64 xfam_fixed0;
+ __u64 xfam_fixed1;
+#define TDX_CAP_GPAW_48 (1 << 0)
+#define TDX_CAP_GPAW_52 (1 << 1)
+ __u32 supported_gpaw;
+ __u32 padding;
+ __u64 reserved[251];
+
+ __u32 nr_cpuid_configs;
+ struct kvm_tdx_cpuid_config cpuid_configs[];
+};
+
+struct kvm_tdx_init_vm {
+ __u64 attributes;
+ __u64 mrconfigid[6]; /* sha384 digest */
+ __u64 mrowner[6]; /* sha384 digest */
+ __u64 mrownerconfig[6]; /* sha348 digest */
+ /*
+ * For future extensibility to make sizeof(struct kvm_tdx_init_vm) = 8KB.
+ * This should be enough given sizeof(TD_PARAMS) = 1024.
+ * 8KB was chosen given because
+ * sizeof(struct kvm_cpuid_entry2) * KVM_MAX_CPUID_ENTRIES(=256) = 8KB.
+ */
+ __u64 reserved[1004];
+
+ /*
+ * Call KVM_TDX_INIT_VM before vcpu creation, thus before
+ * KVM_SET_CPUID2.
+ * This configuration supersedes KVM_SET_CPUID2s for VCPUs because the
+ * TDX module directly virtualizes those CPUIDs without VMM. The user
+ * space VMM, e.g. qemu, should make KVM_SET_CPUID2 consistent with
+ * those values. If it doesn't, KVM may have wrong idea of vCPUIDs of
+ * the guest, and KVM may wrongly emulate CPUIDs or MSRs that the TDX
+ * module doesn't virtualize.
+ */
+ struct kvm_cpuid2 cpuid;
+};
+
+#define KVM_TDX_MEASURE_MEMORY_REGION (1UL << 0)
+
+struct kvm_tdx_init_mem_region {
+ __u64 source_addr;
+ __u64 gpa;
+ __u64 nr_pages;
+};
#endif /* _ASM_X86_KVM_H */
@@ -167,6 +167,92 @@ struct kvm_xen_exit {
} u;
};
+/* masks for reg_mask to indicate which registers are passed. */
+#define TDX_VMCALL_REG_MASK_RBX BIT_ULL(2)
+#define TDX_VMCALL_REG_MASK_RDX BIT_ULL(3)
+#define TDX_VMCALL_REG_MASK_RSI BIT_ULL(6)
+#define TDX_VMCALL_REG_MASK_RDI BIT_ULL(7)
+#define TDX_VMCALL_REG_MASK_R8 BIT_ULL(8)
+#define TDX_VMCALL_REG_MASK_R9 BIT_ULL(9)
+#define TDX_VMCALL_REG_MASK_R10 BIT_ULL(10)
+#define TDX_VMCALL_REG_MASK_R11 BIT_ULL(11)
+#define TDX_VMCALL_REG_MASK_R12 BIT_ULL(12)
+#define TDX_VMCALL_REG_MASK_R13 BIT_ULL(13)
+#define TDX_VMCALL_REG_MASK_R14 BIT_ULL(14)
+#define TDX_VMCALL_REG_MASK_R15 BIT_ULL(15)
+
+struct kvm_tdx_exit {
+#define KVM_EXIT_TDX_VMCALL 1
+ __u32 type;
+ __u32 pad;
+
+ union {
+ struct kvm_tdx_vmcall {
+ /*
+ * RAX(bit 0), RCX(bit 1) and RSP(bit 4) are reserved.
+ * RAX(bit 0): TDG.VP.VMCALL status code.
+ * RCX(bit 1): bitmap for used registers.
+ * RSP(bit 4): the caller stack.
+ */
+ union {
+ __u64 in_rcx;
+ __u64 reg_mask;
+ };
+
+ /*
+ * Guest-Host-Communication Interface for TDX spec
+ * defines the ABI for TDG.VP.VMCALL.
+ */
+ /* Input parameters: guest -> VMM */
+ union {
+ __u64 in_r10;
+ __u64 type;
+ };
+ union {
+ __u64 in_r11;
+ __u64 subfunction;
+ };
+ /*
+ * Subfunction specific.
+ * Registers are used in this order to pass input
+ * arguments. r12=arg0, r13=arg1, etc.
+ */
+ __u64 in_r12;
+ __u64 in_r13;
+ __u64 in_r14;
+ __u64 in_r15;
+ __u64 in_rbx;
+ __u64 in_rdi;
+ __u64 in_rsi;
+ __u64 in_r8;
+ __u64 in_r9;
+ __u64 in_rdx;
+
+ /* Output parameters: VMM -> guest */
+ union {
+ __u64 out_r10;
+ __u64 status_code;
+ };
+ /*
+ * Subfunction specific.
+ * Registers are used in this order to output return
+ * values. r11=ret0, r12=ret1, etc.
+ */
+ __u64 out_r11;
+ __u64 out_r12;
+ __u64 out_r13;
+ __u64 out_r14;
+ __u64 out_r15;
+ __u64 out_rbx;
+ __u64 out_rdi;
+ __u64 out_rsi;
+ __u64 out_r8;
+ __u64 out_r9;
+ __u64 out_rdx;
+ } vmcall;
+ } u;
+};
+
#define KVM_S390_GET_SKEYS_NONE 1
#define KVM_S390_SKEYS_MAX 1048576
@@ -210,6 +296,7 @@ struct kvm_xen_exit {
#define KVM_EXIT_NOTIFY 37
#define KVM_EXIT_LOONGARCH_IOCSR 38
#define KVM_EXIT_MEMORY_FAULT 39
+#define KVM_EXIT_TDX 40
/* For KVM_EXIT_INTERNAL_ERROR */
/* Emulate instruction failed. */
@@ -466,6 +553,8 @@ struct kvm_run {
__u64 gpa;
__u64 size;
} memory_fault;
+ /* KVM_EXIT_TDX_VMCALL */
+ struct kvm_tdx_exit tdx;
/* Fix the size of the union. */
char padding[256];
};
Pull in recent TDX updates, which are not backwards compatible. It's just to make this series runnable. It will be updated by script scripts/update-linux-headers.sh once TDX support is upstreamed in linux kernel Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com> --- linux-headers/asm-x86/kvm.h | 91 +++++++++++++++++++++++++++++++++++++ linux-headers/linux/kvm.h | 89 ++++++++++++++++++++++++++++++++++++ 2 files changed, 180 insertions(+)