@@ -25,6 +25,14 @@
#define GPIO_G 0x48001800
#define GPIO_H 0x48001C00
+/*
+ * MSI (4 MHz) is used as system clock source after startup
+ * from Reset.
+ * AHB prescaler is set to 1 at reset.
+ */
+#define SYSCLK_FREQ_HZ 4000000
+#define RCC_AHB2ENR 0x4002104C
+
#define MODER 0x00
#define OTYPER 0x04
#define PUPDR 0x0C
@@ -168,6 +176,21 @@ static uint32_t reset(uint32_t gpio, unsigned int offset)
return 0x0;
}
+static uint32_t get_clock_freq_hz(unsigned int gpio)
+{
+ g_autofree char *path = g_strdup_printf("/machine/soc/gpio%c",
+ get_gpio_id(gpio) + 'a');
+ uint32_t clock_freq_hz = 0;
+ QDict *r;
+
+ r = qtest_qmp(global_qtest, "{ 'execute': 'qom-get', 'arguments':"
+ " { 'path': %s, 'property': 'clock-freq-hz'} }", path);
+ g_assert_false(qdict_haskey(r, "error"));
+ clock_freq_hz = qdict_get_int(r, "return");
+ qobject_unref(r);
+ return clock_freq_hz;
+}
+
static void system_reset(void)
{
QDict *r;
@@ -505,6 +528,20 @@ static void test_bsrr_brr(const void *data)
gpio_writel(gpio, ODR, reset(gpio, ODR));
}
+static void test_clock_enable(void)
+{
+ /*
+ * For each GPIO, enable its clock in RCC
+ * and check that its clock frequency changes to SYSCLK_FREQ_HZ
+ */
+ for (uint32_t gpio = GPIO_A; gpio <= GPIO_H; gpio += GPIO_B - GPIO_A) {
+ g_assert_cmpuint(get_clock_freq_hz(gpio), ==, 0);
+ /* Enable the gpio clock */
+ writel(RCC_AHB2ENR, readl(RCC_AHB2ENR) | (0x1 << get_gpio_id(gpio)));
+ g_assert_cmpuint(get_clock_freq_hz(gpio), ==, SYSCLK_FREQ_HZ);
+ }
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -556,6 +593,8 @@ int main(int argc, char **argv)
qtest_add_data_func("stm32l4x5/gpio/test_bsrr_brr2",
test_data(GPIO_D, 0),
test_bsrr_brr);
+ qtest_add_func("stm32l4x5/gpio/test_clock_enable",
+ test_clock_enable);
qtest_start("-machine b-l475e-iot01a");
ret = g_test_run();
@@ -26,9 +26,18 @@
#define INVALID_ADDR 0x2C
/* SoC forwards GPIOs to SysCfg */
-#define SYSCFG "/machine/soc"
+#define SOC "/machine/soc"
+#define SYSCFG "/machine/soc/syscfg"
#define EXTI "/machine/soc/exti"
+/*
+ * MSI (4 MHz) is used as system clock source after startup
+ * from Reset.
+ * AHB and APB2 prescalers are set to 1 at reset.
+ */
+#define SYSCLK_FREQ_HZ 4000000
+#define RCC_APB2ENR 0x40021060
+
static void syscfg_writel(unsigned int offset, uint32_t value)
{
writel(SYSCFG_BASE_ADDR + offset, value);
@@ -41,7 +50,7 @@ static uint32_t syscfg_readl(unsigned int offset)
static void syscfg_set_irq(int num, int level)
{
- qtest_set_irq_in(global_qtest, SYSCFG, NULL, num, level);
+ qtest_set_irq_in(global_qtest, SOC, NULL, num, level);
}
static void system_reset(void)
@@ -52,6 +61,19 @@ static void system_reset(void)
qobject_unref(response);
}
+static uint32_t get_clock_freq_hz()
+{
+ uint32_t clock_freq_hz = 0;
+ QDict *r;
+
+ r = qtest_qmp(global_qtest, "{ 'execute': 'qom-get', 'arguments':"
+ " { 'path': %s, 'property': 'clock-freq-hz'} }", SYSCFG);
+ g_assert_false(qdict_haskey(r, "error"));
+ clock_freq_hz = qdict_get_int(r, "return");
+ qobject_unref(r);
+ return clock_freq_hz;
+}
+
static void test_reset(void)
{
/*
@@ -301,6 +323,16 @@ static void test_irq_gpio_multiplexer(void)
syscfg_writel(SYSCFG_EXTICR1, 0x00000000);
}
+static void test_clock_enable(void)
+{
+ g_assert_cmpuint(get_clock_freq_hz(), ==, 0);
+
+ /* Enable SYSCFG clock */
+ writel(RCC_APB2ENR, readl(RCC_APB2ENR) | (0x1 << 0));
+
+ g_assert_cmpuint(get_clock_freq_hz(), ==, SYSCLK_FREQ_HZ);
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -325,6 +357,8 @@ int main(int argc, char **argv)
test_irq_pin_multiplexer);
qtest_add_func("stm32l4x5/syscfg/test_irq_gpio_multiplexer",
test_irq_gpio_multiplexer);
+ qtest_add_func("stm32l4x5/syscfg/test_clock_enable",
+ test_clock_enable);
qtest_start("-machine b-l475e-iot01a");
ret = g_test_run();
@@ -17,6 +17,16 @@
/* Use USART 1 ADDR, assume the others work the same */
#define USART1_BASE_ADDR 0x40013800
+/*
+ * MSI (4 MHz) is used as system clock source after startup
+ * from Reset.
+ * AHB, APB1 and APB2 prescaler are set to 1 at reset.
+ */
+#define SYSCLK_FREQ_HZ 4000000
+#define RCC_APB1ENR1 0x40021058
+#define RCC_APB1ENR2 0x4002105C
+#define RCC_APB2ENR 0x40021060
+
/* See stm32l4x5_usart for definitions */
REG32(CR1, 0x00)
FIELD(CR1, M1, 28, 1)
@@ -64,6 +74,19 @@ static bool clear_nvic_pending(QTestState *qts, unsigned int n)
return true;
}
+static uint32_t get_clock_freq_hz(QTestState *qts, const char *path)
+{
+ uint32_t clock_freq_hz = 0;
+ QDict *r;
+
+ r = qtest_qmp(qts, "{ 'execute': 'qom-get', 'arguments':"
+ " { 'path': %s, 'property': 'clock-freq-hz'} }", path);
+ g_assert_false(qdict_haskey(r, "error"));
+ clock_freq_hz = qdict_get_int(r, "return");
+ qobject_unref(r);
+ return clock_freq_hz;
+}
+
/*
* Wait indefinitely for the flag to be updated.
* If this is run on a slow CI runner,
@@ -296,6 +319,30 @@ static void test_send_str(void)
qtest_quit(qts);
}
+static void check_clock(QTestState *qts, const char *path, uint32_t rcc_reg,
+ uint32_t reg_offset)
+{
+ g_assert_cmpuint(get_clock_freq_hz(qts, path), ==, 0);
+ qtest_writel(qts, rcc_reg, qtest_readl(qts, rcc_reg) | (0x1 << reg_offset));
+ g_assert_cmpuint(get_clock_freq_hz(qts, path), ==, SYSCLK_FREQ_HZ);
+}
+
+static void test_clock_enable(void)
+{
+ /*
+ * For each USART device, enable its clock in RCC
+ * and check that its clock frequency is SYSCLK_FREQ_HZ
+ */
+ QTestState *qts = qtest_init("-M b-l475e-iot01a");
+
+ check_clock(qts, "machine/soc/usart[0]", RCC_APB2ENR, 14);
+ check_clock(qts, "machine/soc/usart[1]", RCC_APB1ENR1, 17);
+ check_clock(qts, "machine/soc/usart[2]", RCC_APB1ENR1, 18);
+ check_clock(qts, "machine/soc/uart[0]", RCC_APB1ENR1, 19);
+ check_clock(qts, "machine/soc/uart[1]", RCC_APB1ENR1, 20);
+ check_clock(qts, "machine/soc/lpuart1", RCC_APB1ENR2, 0);
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -308,6 +355,7 @@ int main(int argc, char **argv)
qtest_add_func("stm32l4x5/usart/send_char", test_send_char);
qtest_add_func("stm32l4x5/usart/receive_str", test_receive_str);
qtest_add_func("stm32l4x5/usart/send_str", test_send_str);
+ qtest_add_func("stm32l4x5/usart/clock_enable", test_clock_enable);
ret = g_test_run();
return ret;
For USART, GPIO and SYSCFG devices, check that clock frequency before and after enabling the peripheral clock in RCC is correct. Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> --- Hello, Should these tests be regrouped in stm32l4x5_rcc-test.c ? Best regards, Inès Varhol tests/qtest/stm32l4x5_gpio-test.c | 39 +++++++++++++++++++++++ tests/qtest/stm32l4x5_syscfg-test.c | 38 +++++++++++++++++++++-- tests/qtest/stm32l4x5_usart-test.c | 48 +++++++++++++++++++++++++++++ 3 files changed, 123 insertions(+), 2 deletions(-)