new file mode 100644
@@ -0,0 +1,40 @@
+/*
+ * QTest testcase header for STM32L4X5 :
+ * used for consolidating common objects in stm32l4x5_*-test.c
+ *
+ * Copyright (c) 2024 Arnaud Minier <arnaud.minier@telecom-paris.fr>
+ * Copyright (c) 2024 Inès Varhol <ines.varhol@telecom-paris.fr>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ */
+
+#include "qemu/osdep.h"
+#include "libqtest.h"
+
+/*
+ * MSI (4 MHz) is used as system clock source after startup
+ * from Reset.
+ * AHB, APB1 and APB2 prescalers are set to 1 at reset.
+ */
+#define SYSCLK_FREQ_HZ 4000000
+#define RCC_AHB2ENR 0x4002104C
+#define RCC_APB1ENR1 0x40021058
+#define RCC_APB1ENR2 0x4002105C
+#define RCC_APB2ENR 0x40021060
+
+
+static inline uint32_t get_clock_freq_hz(QTestState *qts, const char *path)
+{
+ uint32_t clock_freq_hz = 0;
+ QDict *r;
+
+ r = qtest_qmp(qts, "{ 'execute': 'qom-get', 'arguments':"
+ " { 'path': %s, 'property': 'clock-freq-hz'} }", path);
+ g_assert_false(qdict_haskey(r, "error"));
+ clock_freq_hz = qdict_get_int(r, "return");
+ qobject_unref(r);
+ return clock_freq_hz;
+}
+
+
@@ -10,6 +10,7 @@
#include "qemu/osdep.h"
#include "libqtest-single.h"
+#include "stm32l4x5.h"
#define GPIO_BASE_ADDR 0x48000000
#define GPIO_SIZE 0x400
@@ -505,6 +506,26 @@ static void test_bsrr_brr(const void *data)
gpio_writel(gpio, ODR, reset(gpio, ODR));
}
+static void test_clock_enable(void)
+{
+ /*
+ * For each GPIO, enable its clock in RCC
+ * and check that its clock frequency changes to SYSCLK_FREQ_HZ
+ */
+ unsigned int gpio_id;
+
+ for (uint32_t gpio = GPIO_A; gpio <= GPIO_H; gpio += GPIO_B - GPIO_A) {
+ gpio_id = get_gpio_id(gpio);
+ g_autofree char *path = g_strdup_printf("/machine/soc/gpio%c",
+ gpio_id + 'a');
+ g_assert_cmpuint(get_clock_freq_hz(global_qtest, path), ==, 0);
+ /* Enable the gpio clock */
+ writel(RCC_AHB2ENR, readl(RCC_AHB2ENR) | (0x1 << gpio_id));
+ g_assert_cmpuint(get_clock_freq_hz(global_qtest, path), ==,
+ SYSCLK_FREQ_HZ);
+ }
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -556,6 +577,8 @@ int main(int argc, char **argv)
qtest_add_data_func("stm32l4x5/gpio/test_bsrr_brr2",
test_data(GPIO_D, 0),
test_bsrr_brr);
+ qtest_add_func("stm32l4x5/gpio/test_clock_enable",
+ test_clock_enable);
qtest_start("-machine b-l475e-iot01a");
ret = g_test_run();
@@ -10,6 +10,7 @@
#include "qemu/osdep.h"
#include "libqtest-single.h"
+#include "stm32l4x5.h"
#define SYSCFG_BASE_ADDR 0x40010000
#define SYSCFG_MEMRMP 0x00
@@ -26,7 +27,8 @@
#define INVALID_ADDR 0x2C
/* SoC forwards GPIOs to SysCfg */
-#define SYSCFG "/machine/soc"
+#define SOC "/machine/soc"
+#define SYSCFG "/machine/soc/syscfg"
#define EXTI "/machine/soc/exti"
static void syscfg_writel(unsigned int offset, uint32_t value)
@@ -41,7 +43,7 @@ static uint32_t syscfg_readl(unsigned int offset)
static void syscfg_set_irq(int num, int level)
{
- qtest_set_irq_in(global_qtest, SYSCFG, NULL, num, level);
+ qtest_set_irq_in(global_qtest, SOC, NULL, num, level);
}
static void system_reset(void)
@@ -301,6 +303,17 @@ static void test_irq_gpio_multiplexer(void)
syscfg_writel(SYSCFG_EXTICR1, 0x00000000);
}
+static void test_clock_enable(void)
+{
+ g_assert_cmpuint(get_clock_freq_hz(global_qtest, SYSCFG), ==, 0);
+
+ /* Enable SYSCFG clock */
+ writel(RCC_APB2ENR, readl(RCC_APB2ENR) | (0x1 << 0));
+
+ g_assert_cmpuint(get_clock_freq_hz(global_qtest, SYSCFG), ==,
+ SYSCLK_FREQ_HZ);
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -325,6 +338,8 @@ int main(int argc, char **argv)
test_irq_pin_multiplexer);
qtest_add_func("stm32l4x5/syscfg/test_irq_gpio_multiplexer",
test_irq_gpio_multiplexer);
+ qtest_add_func("stm32l4x5/syscfg/test_clock_enable",
+ test_clock_enable);
qtest_start("-machine b-l475e-iot01a");
ret = g_test_run();
@@ -12,6 +12,7 @@
#include "libqtest.h"
#include "hw/misc/stm32l4x5_rcc_internals.h"
#include "hw/registerfields.h"
+#include "stm32l4x5.h"
#define RCC_BASE_ADDR 0x40021000
/* Use USART 1 ADDR, assume the others work the same */
@@ -296,6 +297,30 @@ static void test_send_str(void)
qtest_quit(qts);
}
+static void check_clock(QTestState *qts, const char *path, uint32_t rcc_reg,
+ uint32_t reg_offset)
+{
+ g_assert_cmpuint(get_clock_freq_hz(qts, path), ==, 0);
+ qtest_writel(qts, rcc_reg, qtest_readl(qts, rcc_reg) | (0x1 << reg_offset));
+ g_assert_cmpuint(get_clock_freq_hz(qts, path), ==, SYSCLK_FREQ_HZ);
+}
+
+static void test_clock_enable(void)
+{
+ /*
+ * For each USART device, enable its clock in RCC
+ * and check that its clock frequency is SYSCLK_FREQ_HZ
+ */
+ QTestState *qts = qtest_init("-M b-l475e-iot01a");
+
+ check_clock(qts, "machine/soc/usart[0]", RCC_APB2ENR, 14);
+ check_clock(qts, "machine/soc/usart[1]", RCC_APB1ENR1, 17);
+ check_clock(qts, "machine/soc/usart[2]", RCC_APB1ENR1, 18);
+ check_clock(qts, "machine/soc/uart[0]", RCC_APB1ENR1, 19);
+ check_clock(qts, "machine/soc/uart[1]", RCC_APB1ENR1, 20);
+ check_clock(qts, "machine/soc/lpuart1", RCC_APB1ENR2, 0);
+}
+
int main(int argc, char **argv)
{
int ret;
@@ -308,6 +333,7 @@ int main(int argc, char **argv)
qtest_add_func("stm32l4x5/usart/send_char", test_send_char);
qtest_add_func("stm32l4x5/usart/receive_str", test_receive_str);
qtest_add_func("stm32l4x5/usart/send_str", test_send_str);
+ qtest_add_func("stm32l4x5/usart/clock_enable", test_clock_enable);
ret = g_test_run();
return ret;
For USART, GPIO and SYSCFG devices, check that clock frequency before and after enabling the peripheral clock in RCC is correct. Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> --- tests/qtest/stm32l4x5.h | 40 +++++++++++++++++++++++++++++ tests/qtest/stm32l4x5_gpio-test.c | 23 +++++++++++++++++ tests/qtest/stm32l4x5_syscfg-test.c | 19 ++++++++++++-- tests/qtest/stm32l4x5_usart-test.c | 26 +++++++++++++++++++ 4 files changed, 106 insertions(+), 2 deletions(-) create mode 100644 tests/qtest/stm32l4x5.h