@@ -1177,3 +1177,27 @@ void pcie_acs_reset(PCIDevice *dev)
pci_set_word(dev->config + dev->exp.acs_cap + PCI_ACS_CTRL, 0);
}
}
+
+/* PASID */
+void pcie_pasid_init(PCIDevice *dev, uint16_t offset, uint8_t pasid_width,
+ bool exec_perm, bool priv_mod)
+{
+ assert(pasid_width <= PCI_EXT_CAP_PASID_MAX_WIDTH);
+ static const uint16_t control_reg_rw_mask = 0x07;
+ uint16_t capability_reg = pasid_width;
+
+ pcie_add_capability(dev, PCI_EXT_CAP_ID_PASID, PCI_PASID_VER, offset,
+ PCI_EXT_CAP_PASID_SIZEOF);
+
+ capability_reg <<= PCI_PASID_CAP_WIDTH_SHIFT;
+ capability_reg |= exec_perm ? PCI_PASID_CAP_EXEC : 0;
+ capability_reg |= priv_mod ? PCI_PASID_CAP_PRIV : 0;
+ pci_set_word(dev->config + offset + PCI_PASID_CAP, capability_reg);
+
+ /* Everything is disabled by default */
+ pci_set_word(dev->config + offset + PCI_PASID_CTRL, 0);
+
+ pci_set_word(dev->wmask + offset + PCI_PASID_CTRL, control_reg_rw_mask);
+
+ dev->exp.pasid_cap = offset;
+}
@@ -72,8 +72,9 @@ struct PCIExpressDevice {
uint16_t aer_cap;
PCIEAERLog aer_log;
- /* Offset of ATS capability in config space */
+ /* Offset of ATS and PASID capabilities in config space */
uint16_t ats_cap;
+ uint16_t pasid_cap;
/* ACS */
uint16_t acs_cap;
@@ -150,4 +151,7 @@ void pcie_cap_slot_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp);
void pcie_cap_slot_unplug_request_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp);
+
+void pcie_pasid_init(PCIDevice *dev, uint16_t offset, uint8_t pasid_width,
+ bool exec_perm, bool priv_mod);
#endif /* QEMU_PCIE_H */
@@ -86,6 +86,9 @@ typedef enum PCIExpLinkWidth {
#define PCI_ARI_VER 1
#define PCI_ARI_SIZEOF 8
+/* PASID */
+#define PCI_PASID_VER 1
+#define PCI_EXT_CAP_PASID_MAX_WIDTH 20
/* AER */
#define PCI_ERR_VER 2
#define PCI_ERR_SIZEOF 0x48
@@ -935,6 +935,7 @@
#define PCI_PASID_CAP_EXEC 0x0002 /* Exec permissions Supported */
#define PCI_PASID_CAP_PRIV 0x0004 /* Privilege Mode Supported */
#define PCI_PASID_CAP_WIDTH 0x1f00
+#define PCI_PASID_CAP_WIDTH_SHIFT 8
#define PCI_PASID_CTRL 0x06 /* PASID control register */
#define PCI_PASID_CTRL_ENABLE 0x0001 /* Enable bit */
#define PCI_PASID_CTRL_EXEC 0x0002 /* Exec permissions Enable */