| Message ID | 20240724130717.95629-1-philmd@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [PATCH-for-9.1] target/riscv: Remove the deprecated 'any' CPU type | expand |
On 24/7/24 15:07, Philippe Mathieu-Daudé wrote: > The 'any' CPU is deprecated since commit f57d5f8004b > ("target/riscv: deprecate the 'any' CPU type"). Users > are better off using the default CPUs or the 'max' CPU. > > Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> > --- > docs/about/deprecated.rst | 13 ------------- > docs/about/removed-features.rst | 8 ++++++++ > target/riscv/cpu-qom.h | 1 - > target/riscv/cpu.c | 28 ---------------------------- > 4 files changed, 8 insertions(+), 42 deletions(-) > > diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst > index 88f0f037865..0ac49b15b44 100644 > --- a/docs/about/deprecated.rst > +++ b/docs/about/deprecated.rst > @@ -347,19 +347,6 @@ QEMU's ``vhost`` feature, which would eliminate the high latency costs under > which the 9p ``proxy`` backend currently suffers. However as of to date nobody > has indicated plans for such kind of reimplementation unfortunately. > > -RISC-V 'any' CPU type ``-cpu any`` (since 8.2) > -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > - > -The 'any' CPU type was introduced back in 2018 and has been around since the > -initial RISC-V QEMU port. Its usage has always been unclear: users don't know > -what to expect from a CPU called 'any', and in fact the CPU does not do anything > -special that isn't already done by the default CPUs rv32/rv64. > - > -After the introduction of the 'max' CPU type, RISC-V now has a good coverage > -of generic CPUs: rv32 and rv64 as default CPUs and 'max' as a feature complete > -CPU for both 32 and 64 bit builds. Users are then discouraged to use the 'any' > -CPU type starting in 8.2. > - > RISC-V CPU properties which start with capital 'Z' (since 8.2) > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst > index fc7b28e6373..f3e9474a73e 100644 > --- a/docs/about/removed-features.rst > +++ b/docs/about/removed-features.rst > @@ -850,6 +850,14 @@ The RISC-V no MMU cpus have been removed. The two CPUs: ``rv32imacu-nommu`` and > ``rv64imacu-nommu`` can no longer be used. Instead the MMU status can be specified > via the CPU ``mmu`` option when using the ``rv32`` or ``rv64`` CPUs. > > +RISC-V 'any' CPU type ``-cpu any`` (removed in 9.1) > +''''''''''''''''''''''''''''''''''''''''''''''''''' My bad, this will be 9.2. > + > +The 'any' CPU type was introduced back in 2018 and was around since the > +initial RISC-V QEMU port. Its usage was always been unclear: users don't know > +what to expect from a CPU called 'any', and in fact the CPU does not do anything > +special that isn't already done by the default CPUs rv32/rv64.
On 7/24/24 10:07 AM, Philippe Mathieu-Daudé wrote: > The 'any' CPU is deprecated since commit f57d5f8004b > ("target/riscv: deprecate the 'any' CPU type"). Users > are better off using the default CPUs or the 'max' CPU. > > Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> > --- > docs/about/deprecated.rst | 13 ------------- > docs/about/removed-features.rst | 8 ++++++++ > target/riscv/cpu-qom.h | 1 - > target/riscv/cpu.c | 28 ---------------------------- > 4 files changed, 8 insertions(+), 42 deletions(-) > > diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst > index 88f0f037865..0ac49b15b44 100644 > --- a/docs/about/deprecated.rst > +++ b/docs/about/deprecated.rst > @@ -347,19 +347,6 @@ QEMU's ``vhost`` feature, which would eliminate the high latency costs under > which the 9p ``proxy`` backend currently suffers. However as of to date nobody > has indicated plans for such kind of reimplementation unfortunately. > > -RISC-V 'any' CPU type ``-cpu any`` (since 8.2) > -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > - > -The 'any' CPU type was introduced back in 2018 and has been around since the > -initial RISC-V QEMU port. Its usage has always been unclear: users don't know > -what to expect from a CPU called 'any', and in fact the CPU does not do anything > -special that isn't already done by the default CPUs rv32/rv64. > - > -After the introduction of the 'max' CPU type, RISC-V now has a good coverage > -of generic CPUs: rv32 and rv64 as default CPUs and 'max' as a feature complete > -CPU for both 32 and 64 bit builds. Users are then discouraged to use the 'any' > -CPU type starting in 8.2. > - > RISC-V CPU properties which start with capital 'Z' (since 8.2) > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst > index fc7b28e6373..f3e9474a73e 100644 > --- a/docs/about/removed-features.rst > +++ b/docs/about/removed-features.rst > @@ -850,6 +850,14 @@ The RISC-V no MMU cpus have been removed. The two CPUs: ``rv32imacu-nommu`` and > ``rv64imacu-nommu`` can no longer be used. Instead the MMU status can be specified > via the CPU ``mmu`` option when using the ``rv32`` or ``rv64`` CPUs. > > +RISC-V 'any' CPU type ``-cpu any`` (removed in 9.1) > +''''''''''''''''''''''''''''''''''''''''''''''''''' With the '9.1' changed to '9.2': Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> > + > +The 'any' CPU type was introduced back in 2018 and was around since the > +initial RISC-V QEMU port. Its usage was always been unclear: users don't know > +what to expect from a CPU called 'any', and in fact the CPU does not do anything > +special that isn't already done by the default CPUs rv32/rv64. > + > ``compat`` property of server class POWER CPUs (removed in 6.0) > ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' > > diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h > index 3670cfe6d9a..4464c0fd7a3 100644 > --- a/target/riscv/cpu-qom.h > +++ b/target/riscv/cpu-qom.h > @@ -29,7 +29,6 @@ > #define RISCV_CPU_TYPE_SUFFIX "-" TYPE_RISCV_CPU > #define RISCV_CPU_TYPE_NAME(name) (name RISCV_CPU_TYPE_SUFFIX) > > -#define TYPE_RISCV_CPU_ANY RISCV_CPU_TYPE_NAME("any") > #define TYPE_RISCV_CPU_MAX RISCV_CPU_TYPE_NAME("max") > #define TYPE_RISCV_CPU_BASE32 RISCV_CPU_TYPE_NAME("rv32") > #define TYPE_RISCV_CPU_BASE64 RISCV_CPU_TYPE_NAME("rv64") > diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c > index a90808a3bac..4bda754b013 100644 > --- a/target/riscv/cpu.c > +++ b/target/riscv/cpu.c > @@ -438,27 +438,6 @@ static void set_satp_mode_default_map(RISCVCPU *cpu) > } > #endif > > -static void riscv_any_cpu_init(Object *obj) > -{ > - RISCVCPU *cpu = RISCV_CPU(obj); > - CPURISCVState *env = &cpu->env; > - riscv_cpu_set_misa_ext(env, RVI | RVM | RVA | RVF | RVD | RVC | RVU); > - > -#ifndef CONFIG_USER_ONLY > - set_satp_mode_max_supported(RISCV_CPU(obj), > - riscv_cpu_mxl(&RISCV_CPU(obj)->env) == MXL_RV32 ? > - VM_1_10_SV32 : VM_1_10_SV57); > -#endif > - > - env->priv_ver = PRIV_VERSION_LATEST; > - > - /* inherited from parent obj via riscv_cpu_init() */ > - cpu->cfg.ext_zifencei = true; > - cpu->cfg.ext_zicsr = true; > - cpu->cfg.mmu = true; > - cpu->cfg.pmp = true; > -} > - > static void riscv_max_cpu_init(Object *obj) > { > RISCVCPU *cpu = RISCV_CPU(obj); > @@ -1161,11 +1140,6 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) > RISCVCPUClass *mcc = RISCV_CPU_GET_CLASS(dev); > Error *local_err = NULL; > > - if (object_dynamic_cast(OBJECT(dev), TYPE_RISCV_CPU_ANY) != NULL) { > - warn_report("The 'any' CPU is deprecated and will be " > - "removed in the future."); > - } > - > cpu_exec_realizefn(cs, &local_err); > if (local_err != NULL) { > error_propagate(errp, local_err); > @@ -2952,7 +2926,6 @@ static const TypeInfo riscv_cpu_type_infos[] = { > .abstract = true, > }, > #if defined(TARGET_RISCV32) > - DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_ANY, MXL_RV32, riscv_any_cpu_init), > DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_MAX, MXL_RV32, riscv_max_cpu_init), > DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE32, MXL_RV32, rv32_base_cpu_init), > DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_IBEX, MXL_RV32, rv32_ibex_cpu_init), > @@ -2962,7 +2935,6 @@ static const TypeInfo riscv_cpu_type_infos[] = { > DEFINE_BARE_CPU(TYPE_RISCV_CPU_RV32I, MXL_RV32, rv32i_bare_cpu_init), > DEFINE_BARE_CPU(TYPE_RISCV_CPU_RV32E, MXL_RV32, rv32e_bare_cpu_init), > #elif defined(TARGET_RISCV64) > - DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_ANY, MXL_RV64, riscv_any_cpu_init), > DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_MAX, MXL_RV64, riscv_max_cpu_init), > DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE64, MXL_RV64, rv64_base_cpu_init), > DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_SIFIVE_E51, MXL_RV64, rv64_sifive_e_cpu_init),
On Wed, Jul 24, 2024 at 11:08 PM Philippe Mathieu-Daudé <philmd@linaro.org> wrote: > > The 'any' CPU is deprecated since commit f57d5f8004b > ("target/riscv: deprecate the 'any' CPU type"). Users > are better off using the default CPUs or the 'max' CPU. > > Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Alistair > --- > docs/about/deprecated.rst | 13 ------------- > docs/about/removed-features.rst | 8 ++++++++ > target/riscv/cpu-qom.h | 1 - > target/riscv/cpu.c | 28 ---------------------------- > 4 files changed, 8 insertions(+), 42 deletions(-) > > diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst > index 88f0f037865..0ac49b15b44 100644 > --- a/docs/about/deprecated.rst > +++ b/docs/about/deprecated.rst > @@ -347,19 +347,6 @@ QEMU's ``vhost`` feature, which would eliminate the high latency costs under > which the 9p ``proxy`` backend currently suffers. However as of to date nobody > has indicated plans for such kind of reimplementation unfortunately. > > -RISC-V 'any' CPU type ``-cpu any`` (since 8.2) > -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > - > -The 'any' CPU type was introduced back in 2018 and has been around since the > -initial RISC-V QEMU port. Its usage has always been unclear: users don't know > -what to expect from a CPU called 'any', and in fact the CPU does not do anything > -special that isn't already done by the default CPUs rv32/rv64. > - > -After the introduction of the 'max' CPU type, RISC-V now has a good coverage > -of generic CPUs: rv32 and rv64 as default CPUs and 'max' as a feature complete > -CPU for both 32 and 64 bit builds. Users are then discouraged to use the 'any' > -CPU type starting in 8.2. > - > RISC-V CPU properties which start with capital 'Z' (since 8.2) > ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > > diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst > index fc7b28e6373..f3e9474a73e 100644 > --- a/docs/about/removed-features.rst > +++ b/docs/about/removed-features.rst > @@ -850,6 +850,14 @@ The RISC-V no MMU cpus have been removed. The two CPUs: ``rv32imacu-nommu`` and > ``rv64imacu-nommu`` can no longer be used. Instead the MMU status can be specified > via the CPU ``mmu`` option when using the ``rv32`` or ``rv64`` CPUs. > > +RISC-V 'any' CPU type ``-cpu any`` (removed in 9.1) > +''''''''''''''''''''''''''''''''''''''''''''''''''' > + > +The 'any' CPU type was introduced back in 2018 and was around since the > +initial RISC-V QEMU port. Its usage was always been unclear: users don't know > +what to expect from a CPU called 'any', and in fact the CPU does not do anything > +special that isn't already done by the default CPUs rv32/rv64. > + > ``compat`` property of server class POWER CPUs (removed in 6.0) > ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' > > diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h > index 3670cfe6d9a..4464c0fd7a3 100644 > --- a/target/riscv/cpu-qom.h > +++ b/target/riscv/cpu-qom.h > @@ -29,7 +29,6 @@ > #define RISCV_CPU_TYPE_SUFFIX "-" TYPE_RISCV_CPU > #define RISCV_CPU_TYPE_NAME(name) (name RISCV_CPU_TYPE_SUFFIX) > > -#define TYPE_RISCV_CPU_ANY RISCV_CPU_TYPE_NAME("any") > #define TYPE_RISCV_CPU_MAX RISCV_CPU_TYPE_NAME("max") > #define TYPE_RISCV_CPU_BASE32 RISCV_CPU_TYPE_NAME("rv32") > #define TYPE_RISCV_CPU_BASE64 RISCV_CPU_TYPE_NAME("rv64") > diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c > index a90808a3bac..4bda754b013 100644 > --- a/target/riscv/cpu.c > +++ b/target/riscv/cpu.c > @@ -438,27 +438,6 @@ static void set_satp_mode_default_map(RISCVCPU *cpu) > } > #endif > > -static void riscv_any_cpu_init(Object *obj) > -{ > - RISCVCPU *cpu = RISCV_CPU(obj); > - CPURISCVState *env = &cpu->env; > - riscv_cpu_set_misa_ext(env, RVI | RVM | RVA | RVF | RVD | RVC | RVU); > - > -#ifndef CONFIG_USER_ONLY > - set_satp_mode_max_supported(RISCV_CPU(obj), > - riscv_cpu_mxl(&RISCV_CPU(obj)->env) == MXL_RV32 ? > - VM_1_10_SV32 : VM_1_10_SV57); > -#endif > - > - env->priv_ver = PRIV_VERSION_LATEST; > - > - /* inherited from parent obj via riscv_cpu_init() */ > - cpu->cfg.ext_zifencei = true; > - cpu->cfg.ext_zicsr = true; > - cpu->cfg.mmu = true; > - cpu->cfg.pmp = true; > -} > - > static void riscv_max_cpu_init(Object *obj) > { > RISCVCPU *cpu = RISCV_CPU(obj); > @@ -1161,11 +1140,6 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) > RISCVCPUClass *mcc = RISCV_CPU_GET_CLASS(dev); > Error *local_err = NULL; > > - if (object_dynamic_cast(OBJECT(dev), TYPE_RISCV_CPU_ANY) != NULL) { > - warn_report("The 'any' CPU is deprecated and will be " > - "removed in the future."); > - } > - > cpu_exec_realizefn(cs, &local_err); > if (local_err != NULL) { > error_propagate(errp, local_err); > @@ -2952,7 +2926,6 @@ static const TypeInfo riscv_cpu_type_infos[] = { > .abstract = true, > }, > #if defined(TARGET_RISCV32) > - DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_ANY, MXL_RV32, riscv_any_cpu_init), > DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_MAX, MXL_RV32, riscv_max_cpu_init), > DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE32, MXL_RV32, rv32_base_cpu_init), > DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_IBEX, MXL_RV32, rv32_ibex_cpu_init), > @@ -2962,7 +2935,6 @@ static const TypeInfo riscv_cpu_type_infos[] = { > DEFINE_BARE_CPU(TYPE_RISCV_CPU_RV32I, MXL_RV32, rv32i_bare_cpu_init), > DEFINE_BARE_CPU(TYPE_RISCV_CPU_RV32E, MXL_RV32, rv32e_bare_cpu_init), > #elif defined(TARGET_RISCV64) > - DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_ANY, MXL_RV64, riscv_any_cpu_init), > DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_MAX, MXL_RV64, riscv_max_cpu_init), > DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE64, MXL_RV64, rv64_base_cpu_init), > DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_SIFIVE_E51, MXL_RV64, rv64_sifive_e_cpu_init), > -- > 2.45.2 > >
diff --git a/docs/about/deprecated.rst b/docs/about/deprecated.rst index 88f0f037865..0ac49b15b44 100644 --- a/docs/about/deprecated.rst +++ b/docs/about/deprecated.rst @@ -347,19 +347,6 @@ QEMU's ``vhost`` feature, which would eliminate the high latency costs under which the 9p ``proxy`` backend currently suffers. However as of to date nobody has indicated plans for such kind of reimplementation unfortunately. -RISC-V 'any' CPU type ``-cpu any`` (since 8.2) -^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ - -The 'any' CPU type was introduced back in 2018 and has been around since the -initial RISC-V QEMU port. Its usage has always been unclear: users don't know -what to expect from a CPU called 'any', and in fact the CPU does not do anything -special that isn't already done by the default CPUs rv32/rv64. - -After the introduction of the 'max' CPU type, RISC-V now has a good coverage -of generic CPUs: rv32 and rv64 as default CPUs and 'max' as a feature complete -CPU for both 32 and 64 bit builds. Users are then discouraged to use the 'any' -CPU type starting in 8.2. - RISC-V CPU properties which start with capital 'Z' (since 8.2) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ diff --git a/docs/about/removed-features.rst b/docs/about/removed-features.rst index fc7b28e6373..f3e9474a73e 100644 --- a/docs/about/removed-features.rst +++ b/docs/about/removed-features.rst @@ -850,6 +850,14 @@ The RISC-V no MMU cpus have been removed. The two CPUs: ``rv32imacu-nommu`` and ``rv64imacu-nommu`` can no longer be used. Instead the MMU status can be specified via the CPU ``mmu`` option when using the ``rv32`` or ``rv64`` CPUs. +RISC-V 'any' CPU type ``-cpu any`` (removed in 9.1) +''''''''''''''''''''''''''''''''''''''''''''''''''' + +The 'any' CPU type was introduced back in 2018 and was around since the +initial RISC-V QEMU port. Its usage was always been unclear: users don't know +what to expect from a CPU called 'any', and in fact the CPU does not do anything +special that isn't already done by the default CPUs rv32/rv64. + ``compat`` property of server class POWER CPUs (removed in 6.0) ''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' diff --git a/target/riscv/cpu-qom.h b/target/riscv/cpu-qom.h index 3670cfe6d9a..4464c0fd7a3 100644 --- a/target/riscv/cpu-qom.h +++ b/target/riscv/cpu-qom.h @@ -29,7 +29,6 @@ #define RISCV_CPU_TYPE_SUFFIX "-" TYPE_RISCV_CPU #define RISCV_CPU_TYPE_NAME(name) (name RISCV_CPU_TYPE_SUFFIX) -#define TYPE_RISCV_CPU_ANY RISCV_CPU_TYPE_NAME("any") #define TYPE_RISCV_CPU_MAX RISCV_CPU_TYPE_NAME("max") #define TYPE_RISCV_CPU_BASE32 RISCV_CPU_TYPE_NAME("rv32") #define TYPE_RISCV_CPU_BASE64 RISCV_CPU_TYPE_NAME("rv64") diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index a90808a3bac..4bda754b013 100644 --- a/target/riscv/cpu.c +++ b/target/riscv/cpu.c @@ -438,27 +438,6 @@ static void set_satp_mode_default_map(RISCVCPU *cpu) } #endif -static void riscv_any_cpu_init(Object *obj) -{ - RISCVCPU *cpu = RISCV_CPU(obj); - CPURISCVState *env = &cpu->env; - riscv_cpu_set_misa_ext(env, RVI | RVM | RVA | RVF | RVD | RVC | RVU); - -#ifndef CONFIG_USER_ONLY - set_satp_mode_max_supported(RISCV_CPU(obj), - riscv_cpu_mxl(&RISCV_CPU(obj)->env) == MXL_RV32 ? - VM_1_10_SV32 : VM_1_10_SV57); -#endif - - env->priv_ver = PRIV_VERSION_LATEST; - - /* inherited from parent obj via riscv_cpu_init() */ - cpu->cfg.ext_zifencei = true; - cpu->cfg.ext_zicsr = true; - cpu->cfg.mmu = true; - cpu->cfg.pmp = true; -} - static void riscv_max_cpu_init(Object *obj) { RISCVCPU *cpu = RISCV_CPU(obj); @@ -1161,11 +1140,6 @@ static void riscv_cpu_realize(DeviceState *dev, Error **errp) RISCVCPUClass *mcc = RISCV_CPU_GET_CLASS(dev); Error *local_err = NULL; - if (object_dynamic_cast(OBJECT(dev), TYPE_RISCV_CPU_ANY) != NULL) { - warn_report("The 'any' CPU is deprecated and will be " - "removed in the future."); - } - cpu_exec_realizefn(cs, &local_err); if (local_err != NULL) { error_propagate(errp, local_err); @@ -2952,7 +2926,6 @@ static const TypeInfo riscv_cpu_type_infos[] = { .abstract = true, }, #if defined(TARGET_RISCV32) - DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_ANY, MXL_RV32, riscv_any_cpu_init), DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_MAX, MXL_RV32, riscv_max_cpu_init), DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE32, MXL_RV32, rv32_base_cpu_init), DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_IBEX, MXL_RV32, rv32_ibex_cpu_init), @@ -2962,7 +2935,6 @@ static const TypeInfo riscv_cpu_type_infos[] = { DEFINE_BARE_CPU(TYPE_RISCV_CPU_RV32I, MXL_RV32, rv32i_bare_cpu_init), DEFINE_BARE_CPU(TYPE_RISCV_CPU_RV32E, MXL_RV32, rv32e_bare_cpu_init), #elif defined(TARGET_RISCV64) - DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_ANY, MXL_RV64, riscv_any_cpu_init), DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_MAX, MXL_RV64, riscv_max_cpu_init), DEFINE_DYNAMIC_CPU(TYPE_RISCV_CPU_BASE64, MXL_RV64, rv64_base_cpu_init), DEFINE_VENDOR_CPU(TYPE_RISCV_CPU_SIFIVE_E51, MXL_RV64, rv64_sifive_e_cpu_init),
The 'any' CPU is deprecated since commit f57d5f8004b ("target/riscv: deprecate the 'any' CPU type"). Users are better off using the default CPUs or the 'max' CPU. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- docs/about/deprecated.rst | 13 ------------- docs/about/removed-features.rst | 8 ++++++++ target/riscv/cpu-qom.h | 1 - target/riscv/cpu.c | 28 ---------------------------- 4 files changed, 8 insertions(+), 42 deletions(-)