@@ -22,6 +22,7 @@
#include "qemu.h"
#include "disas/disas.h"
#include "qemu/path.h"
+#include "qapi/error.h"
static abi_ulong target_auxents; /* Where the AUX entries are in target */
static size_t target_auxents_sz; /* Size of AUX entries including AT_NULL */
@@ -210,62 +211,63 @@ static void setup_arg_pages(struct bsd_binprm *bprm, struct image_info *info,
}
}
-static void set_brk(abi_ulong start, abi_ulong end)
+/**
+ * zero_bss:
+ *
+ * Map and zero the bss. We need to explicitly zero any fractional pages
+ * after the data section (i.e. bss). Return false on mapping failure.
+ */
+static bool zero_bss(abi_ulong start_bss, abi_ulong end_bss,
+ int prot, Error **errp)
{
- /* page-align the start and end addresses... */
- start = HOST_PAGE_ALIGN(start);
- end = HOST_PAGE_ALIGN(end);
- if (end <= start) {
- return;
- }
- if (target_mmap(start, end - start, PROT_READ | PROT_WRITE | PROT_EXEC,
- MAP_FIXED | MAP_PRIVATE | MAP_ANON, -1, 0) == -1) {
- perror("cannot mmap brk");
- exit(-1);
+ abi_ulong align_bss;
+
+ /* We only expect writable bss; the code segment shouldn't need this. */
+ if (!(prot & PROT_WRITE)) {
+ error_setg(errp, "PT_LOAD with non-writable bss");
+ return false;
}
-}
+ align_bss = TARGET_PAGE_ALIGN(start_bss);
+ end_bss = TARGET_PAGE_ALIGN(end_bss);
-/*
- * We need to explicitly zero any fractional pages after the data
- * section (i.e. bss). This would contain the junk from the file that
- * should not be in memory.
- */
-static void padzero(abi_ulong elf_bss, abi_ulong last_bss)
-{
- abi_ulong nbyte;
+ if (start_bss < align_bss) {
+ int flags = page_get_flags(start_bss);
- if (elf_bss >= last_bss) {
- return;
- }
+ if (!(flags & PAGE_RWX)) {
+ /*
+ * The whole address space of the executable was reserved
+ * at the start, therefore all pages will be VALID.
+ * But assuming there are no PROT_NONE PT_LOAD segments,
+ * a PROT_NONE page means no data all bss, and we can
+ * simply extend the new anon mapping back to the start
+ * of the page of bss.
+ */
+ align_bss -= TARGET_PAGE_SIZE;
+ } else {
+ /*
+ * The start of the bss shares a page with something.
+ * The only thing that we expect is the data section,
+ * which would already be marked writable.
+ * Overlapping the RX code segment seems malformed.
+ */
+ if (!(flags & PAGE_WRITE)) {
+ error_setg(errp, "PT_LOAD with bss overlapping "
+ "non-writable page");
+ return false;
+ }
- /*
- * XXX: this is really a hack : if the real host page size is
- * smaller than the target page size, some pages after the end
- * of the file may not be mapped. A better fix would be to
- * patch target_mmap(), but it is more complicated as the file
- * size must be known.
- */
- if (qemu_real_host_page_size() < qemu_host_page_size) {
- abi_ulong end_addr, end_addr1;
- end_addr1 = REAL_HOST_PAGE_ALIGN(elf_bss);
- end_addr = HOST_PAGE_ALIGN(elf_bss);
- if (end_addr1 < end_addr) {
- mmap((void *)g2h_untagged(end_addr1), end_addr - end_addr1,
- PROT_READ | PROT_WRITE | PROT_EXEC,
- MAP_FIXED | MAP_PRIVATE | MAP_ANON, -1, 0);
+ /* The page is already mapped and writable. */
+ memset(g2h_untagged(start_bss), 0, align_bss - start_bss);
}
}
-
- nbyte = elf_bss & (qemu_host_page_size - 1);
- if (nbyte) {
- nbyte = qemu_host_page_size - nbyte;
- do {
- /* FIXME - what to do if put_user() fails? */
- put_user_u8(0, elf_bss);
- elf_bss++;
- } while (--nbyte);
+ if (align_bss < end_bss &&
+ target_mmap(align_bss, end_bss - align_bss, prot,
+ MAP_FIXED | MAP_PRIVATE | MAP_ANON, -1, 0) == -1) {
+ error_setg_errno(errp, errno, "Error mapping bss");
+ return false;
}
+ return true;
}
static abi_ulong load_elf_interp(const char *elf_interpreter,
@@ -535,6 +537,7 @@ load_elf_sections(const char *image_name, const struct elfhdr *hdr,
abi_ulong baddr;
int i;
bool first;
+ Error *err = NULL;
/*
* Now we do a little grungy work by mmaping the ELF image into
@@ -579,12 +582,10 @@ load_elf_sections(const char *image_name, const struct elfhdr *hdr,
start_bss = rbase + elf_ppnt->p_vaddr + elf_ppnt->p_filesz;
end_bss = rbase + elf_ppnt->p_vaddr + elf_ppnt->p_memsz;
- /*
- * Calling set_brk effectively mmaps the pages that we need for the
- * bss and break sections.
- */
- set_brk(start_bss, end_bss);
- padzero(start_bss, end_bss);
+ if (start_bss < end_bss &&
+ !zero_bss(start_bss, end_bss, elf_prot, &err)) {
+ goto exit_errmsg;
+ }
}
if (first) {
@@ -597,6 +598,9 @@ load_elf_sections(const char *image_name, const struct elfhdr *hdr,
*baddrp = baddr;
}
return 0;
+exit_errmsg:
+ error_reportf_err(err, "%s: ", image_name);
+ exit(-1);
}
int load_elf_binary(struct bsd_binprm *bprm, struct image_info *info)
The zero_bss interface from linux-user is much better at doing this. Use it in preference to set_brk (badly named) and padzero. These both have issues with the new variable page size code, so it's best to just retire them and reuse the code from linux-user. Also start to use the error reporting code that linux-user uses to give better error messages on failure. Signed-off-by: Warner Losh <imp@bsdimp.com> --- bsd-user/elfload.c | 110 +++++++++++++++++++++++---------------------- 1 file changed, 57 insertions(+), 53 deletions(-)