@@ -750,14 +750,6 @@ S: Maintained
F: hw/rtc/goldfish_rtc.c
F: include/hw/rtc/goldfish_rtc.h
-Gumstix
-M: Peter Maydell <peter.maydell@linaro.org>
-R: Philippe Mathieu-Daudé <philmd@linaro.org>
-L: qemu-arm@nongnu.org
-S: Odd Fixes
-F: hw/arm/gumstix.c
-F: docs/system/arm/gumstix.rst
-
i.MX25 PDK
M: Peter Maydell <peter.maydell@linaro.org>
R: Jean-Christophe Dubois <jcd@tribudubois.net>
deleted file mode 100644
@@ -1,21 +0,0 @@
-Gumstix Connex and Verdex (``connex``, ``verdex``)
-==================================================
-
-These machines model the Gumstix Connex and Verdex boards.
-The Connex has a PXA255 CPU and the Verdex has a PXA270.
-
-Implemented devices:
-
- * NOR flash
- * SMC91C111 ethernet
- * Interrupt controller
- * DMA
- * Timer
- * GPIO
- * MMC/SD card
- * Fast infra-red communications port (FIR)
- * LCD controller
- * Synchronous serial ports (SPI)
- * PCMCIA interface
- * I2C
- * I2S
@@ -91,7 +91,6 @@ undocumented; you can get a complete list by running
arm/cubieboard
arm/emcraft-sf2
arm/musicpal
- arm/gumstix
arm/mainstone
arm/kzm
arm/nseries
@@ -28,7 +28,6 @@
# CONFIG_VEXPRESS=n
# CONFIG_ZYNQ=n
# CONFIG_MAINSTONE=n
-# CONFIG_GUMSTIX=n
# CONFIG_Z2=n
# CONFIG_NPCM7XX=n
# CONFIG_COLLIE=n
deleted file mode 100644
@@ -1,141 +0,0 @@
-/*
- * Gumstix Platforms
- *
- * Copyright (c) 2007 by Thorsten Zitterell <info@bitmux.org>
- *
- * Code based on spitz platform by Andrzej Zaborowski <balrog@zabor.org>
- *
- * This code is licensed under the GNU GPL v2.
- *
- * Contributions after 2012-01-13 are licensed under the terms of the
- * GNU GPL, version 2 or (at your option) any later version.
- */
-
-/*
- * Example usage:
- *
- * connex:
- * =======
- * create image:
- * # dd of=flash bs=1k count=16k if=/dev/zero
- * # dd of=flash bs=1k conv=notrunc if=u-boot.bin
- * # dd of=flash bs=1k conv=notrunc seek=256 if=rootfs.arm_nofpu.jffs2
- * start it:
- * # qemu-system-arm -M connex -pflash flash -monitor null -nographic
- *
- * verdex:
- * =======
- * create image:
- * # dd of=flash bs=1k count=32k if=/dev/zero
- * # dd of=flash bs=1k conv=notrunc if=u-boot.bin
- * # dd of=flash bs=1k conv=notrunc seek=256 if=rootfs.arm_nofpu.jffs2
- * # dd of=flash bs=1k conv=notrunc seek=31744 if=uImage
- * start it:
- * # qemu-system-arm -M verdex -pflash flash -monitor null -nographic -m 289
- */
-
-#include "qemu/osdep.h"
-#include "qemu/units.h"
-#include "qemu/error-report.h"
-#include "hw/arm/pxa.h"
-#include "net/net.h"
-#include "hw/block/flash.h"
-#include "hw/net/smc91c111.h"
-#include "hw/boards.h"
-#include "exec/address-spaces.h"
-#include "sysemu/qtest.h"
-
-#define CONNEX_FLASH_SIZE (16 * MiB)
-#define CONNEX_RAM_SIZE (64 * MiB)
-
-#define VERDEX_FLASH_SIZE (32 * MiB)
-#define VERDEX_RAM_SIZE (256 * MiB)
-
-#define FLASH_SECTOR_SIZE (128 * KiB)
-
-static void connex_init(MachineState *machine)
-{
- PXA2xxState *cpu;
- DriveInfo *dinfo;
-
- cpu = pxa255_init(CONNEX_RAM_SIZE);
-
- dinfo = drive_get(IF_PFLASH, 0, 0);
- if (!dinfo && !qtest_enabled()) {
- error_report("A flash image must be given with the "
- "'pflash' parameter");
- exit(1);
- }
-
- /* Numonyx RC28F128J3F75 */
- pflash_cfi01_register(0x00000000, "connext.rom", CONNEX_FLASH_SIZE,
- dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
- FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0);
-
- /* Interrupt line of NIC is connected to GPIO line 36 */
- smc91c111_init(0x04000300, qdev_get_gpio_in(cpu->gpio, 36));
-}
-
-static void verdex_init(MachineState *machine)
-{
- PXA2xxState *cpu;
- DriveInfo *dinfo;
-
- cpu = pxa270_init(VERDEX_RAM_SIZE, machine->cpu_type);
-
- dinfo = drive_get(IF_PFLASH, 0, 0);
- if (!dinfo && !qtest_enabled()) {
- error_report("A flash image must be given with the "
- "'pflash' parameter");
- exit(1);
- }
-
- /* Micron RC28F256P30TFA */
- pflash_cfi01_register(0x00000000, "verdex.rom", VERDEX_FLASH_SIZE,
- dinfo ? blk_by_legacy_dinfo(dinfo) : NULL,
- FLASH_SECTOR_SIZE, 2, 0, 0, 0, 0, 0);
-
- /* Interrupt line of NIC is connected to GPIO line 99 */
- smc91c111_init(0x04000300, qdev_get_gpio_in(cpu->gpio, 99));
-}
-
-static void connex_class_init(ObjectClass *oc, void *data)
-{
- MachineClass *mc = MACHINE_CLASS(oc);
-
- mc->desc = "Gumstix Connex (PXA255)";
- mc->init = connex_init;
- mc->ignore_memory_transaction_failures = true;
- mc->deprecation_reason = "machine is old and unmaintained";
-}
-
-static const TypeInfo connex_type = {
- .name = MACHINE_TYPE_NAME("connex"),
- .parent = TYPE_MACHINE,
- .class_init = connex_class_init,
-};
-
-static void verdex_class_init(ObjectClass *oc, void *data)
-{
- MachineClass *mc = MACHINE_CLASS(oc);
-
- mc->desc = "Gumstix Verdex Pro XL6P COMs (PXA270)";
- mc->init = verdex_init;
- mc->ignore_memory_transaction_failures = true;
- mc->deprecation_reason = "machine is old and unmaintained";
- mc->default_cpu_type = ARM_CPU_TYPE_NAME("pxa270-c0");
-}
-
-static const TypeInfo verdex_type = {
- .name = MACHINE_TYPE_NAME("verdex"),
- .parent = TYPE_MACHINE,
- .class_init = verdex_class_init,
-};
-
-static void gumstix_machine_init(void)
-{
- type_register_static(&connex_type);
- type_register_static(&verdex_type);
-}
-
-type_init(gumstix_machine_init)
@@ -184,14 +184,6 @@ config PXA2XX
select USB_OHCI_SYSBUS
select PCMCIA
-config GUMSTIX
- bool
- default y
- depends on TCG && ARM
- select PFLASH_CFI01
- select SMC91C111
- select PXA2XX
-
config Z2
bool
default y
@@ -67,7 +67,6 @@ arm_ss.add(when: 'CONFIG_XEN', if_true: files(
system_ss.add(when: 'CONFIG_ARM_SMMUV3', if_true: files('smmu-common.c'))
system_ss.add(when: 'CONFIG_COLLIE', if_true: files('collie.c'))
system_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4_boards.c'))
-system_ss.add(when: 'CONFIG_GUMSTIX', if_true: files('gumstix.c'))
system_ss.add(when: 'CONFIG_NETDUINO2', if_true: files('netduino2.c'))
system_ss.add(when: 'CONFIG_OMAP', if_true: files('omap2.c'))
system_ss.add(when: 'CONFIG_RASPI', if_true: files('bcm2835_peripherals.c'))