@@ -71,9 +71,4 @@
/* pxa2xx_pic.c */
DeviceState *pxa2xx_pic_init(hwaddr base, ARMCPU *cpu);
-/* pxa2xx_gpio.c */
-DeviceState *pxa2xx_gpio_init(hwaddr base,
- ARMCPU *cpu, DeviceState *pic, int lines);
-void pxa2xx_gpio_read_notifier(DeviceState *dev, qemu_irq handler);
-
#endif /* PXA_H */
deleted file mode 100644
@@ -1,365 +0,0 @@
-/*
- * Intel XScale PXA255/270 GPIO controller emulation.
- *
- * Copyright (c) 2006 Openedhand Ltd.
- * Written by Andrzej Zaborowski <balrog@zabor.org>
- *
- * This code is licensed under the GPL.
- */
-
-#include "qemu/osdep.h"
-#include "cpu.h"
-#include "hw/irq.h"
-#include "hw/qdev-properties.h"
-#include "hw/sysbus.h"
-#include "migration/vmstate.h"
-#include "hw/arm/pxa.h"
-#include "qapi/error.h"
-#include "qemu/log.h"
-#include "qemu/module.h"
-#include "qom/object.h"
-
-#define PXA2XX_GPIO_BANKS 4
-
-#define TYPE_PXA2XX_GPIO "pxa2xx-gpio"
-OBJECT_DECLARE_SIMPLE_TYPE(PXA2xxGPIOInfo, PXA2XX_GPIO)
-
-struct PXA2xxGPIOInfo {
- /*< private >*/
- SysBusDevice parent_obj;
- /*< public >*/
-
- MemoryRegion iomem;
- qemu_irq irq0, irq1, irqX;
- int lines;
- ARMCPU *cpu;
-
- /* XXX: GNU C vectors are more suitable */
- uint32_t ilevel[PXA2XX_GPIO_BANKS];
- uint32_t olevel[PXA2XX_GPIO_BANKS];
- uint32_t dir[PXA2XX_GPIO_BANKS];
- uint32_t rising[PXA2XX_GPIO_BANKS];
- uint32_t falling[PXA2XX_GPIO_BANKS];
- uint32_t status[PXA2XX_GPIO_BANKS];
- uint32_t gafr[PXA2XX_GPIO_BANKS * 2];
-
- uint32_t prev_level[PXA2XX_GPIO_BANKS];
- qemu_irq handler[PXA2XX_GPIO_BANKS * 32];
- qemu_irq read_notify;
-};
-
-static struct {
- enum {
- GPIO_NONE,
- GPLR,
- GPSR,
- GPCR,
- GPDR,
- GRER,
- GFER,
- GEDR,
- GAFR_L,
- GAFR_U,
- } reg;
- int bank;
-} pxa2xx_gpio_regs[0x200] = {
- [0 ... 0x1ff] = { GPIO_NONE, 0 },
-#define PXA2XX_REG(reg, a0, a1, a2, a3) \
- [a0] = { reg, 0 }, [a1] = { reg, 1 }, [a2] = { reg, 2 }, [a3] = { reg, 3 },
-
- PXA2XX_REG(GPLR, 0x000, 0x004, 0x008, 0x100)
- PXA2XX_REG(GPSR, 0x018, 0x01c, 0x020, 0x118)
- PXA2XX_REG(GPCR, 0x024, 0x028, 0x02c, 0x124)
- PXA2XX_REG(GPDR, 0x00c, 0x010, 0x014, 0x10c)
- PXA2XX_REG(GRER, 0x030, 0x034, 0x038, 0x130)
- PXA2XX_REG(GFER, 0x03c, 0x040, 0x044, 0x13c)
- PXA2XX_REG(GEDR, 0x048, 0x04c, 0x050, 0x148)
- PXA2XX_REG(GAFR_L, 0x054, 0x05c, 0x064, 0x06c)
- PXA2XX_REG(GAFR_U, 0x058, 0x060, 0x068, 0x070)
-};
-
-static void pxa2xx_gpio_irq_update(PXA2xxGPIOInfo *s)
-{
- if (s->status[0] & (1 << 0))
- qemu_irq_raise(s->irq0);
- else
- qemu_irq_lower(s->irq0);
-
- if (s->status[0] & (1 << 1))
- qemu_irq_raise(s->irq1);
- else
- qemu_irq_lower(s->irq1);
-
- if ((s->status[0] & ~3) | s->status[1] | s->status[2] | s->status[3])
- qemu_irq_raise(s->irqX);
- else
- qemu_irq_lower(s->irqX);
-}
-
-/* Bitmap of pins used as standby and sleep wake-up sources. */
-static const int pxa2xx_gpio_wake[PXA2XX_GPIO_BANKS] = {
- 0x8003fe1b, 0x002001fc, 0xec080000, 0x0012007f,
-};
-
-static void pxa2xx_gpio_set(void *opaque, int line, int level)
-{
- PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
- CPUState *cpu = CPU(s->cpu);
- int bank;
- uint32_t mask;
-
- if (line >= s->lines) {
- printf("%s: No GPIO pin %i\n", __func__, line);
- return;
- }
-
- bank = line >> 5;
- mask = 1U << (line & 31);
-
- if (level) {
- s->status[bank] |= s->rising[bank] & mask &
- ~s->ilevel[bank] & ~s->dir[bank];
- s->ilevel[bank] |= mask;
- } else {
- s->status[bank] |= s->falling[bank] & mask &
- s->ilevel[bank] & ~s->dir[bank];
- s->ilevel[bank] &= ~mask;
- }
-
- if (s->status[bank] & mask)
- pxa2xx_gpio_irq_update(s);
-
- /* Wake-up GPIOs */
- if (cpu->halted && (mask & ~s->dir[bank] & pxa2xx_gpio_wake[bank])) {
- cpu_interrupt(cpu, CPU_INTERRUPT_EXITTB);
- }
-}
-
-static void pxa2xx_gpio_handler_update(PXA2xxGPIOInfo *s) {
- uint32_t level, diff;
- int i, bit, line;
- for (i = 0; i < PXA2XX_GPIO_BANKS; i ++) {
- level = s->olevel[i] & s->dir[i];
-
- for (diff = s->prev_level[i] ^ level; diff; diff ^= 1 << bit) {
- bit = ctz32(diff);
- line = bit + 32 * i;
- qemu_set_irq(s->handler[line], (level >> bit) & 1);
- }
-
- s->prev_level[i] = level;
- }
-}
-
-static uint64_t pxa2xx_gpio_read(void *opaque, hwaddr offset,
- unsigned size)
-{
- PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
- uint32_t ret;
- int bank;
- if (offset >= 0x200)
- return 0;
-
- bank = pxa2xx_gpio_regs[offset].bank;
- switch (pxa2xx_gpio_regs[offset].reg) {
- case GPDR: /* GPIO Pin-Direction registers */
- return s->dir[bank];
-
- case GPSR: /* GPIO Pin-Output Set registers */
- qemu_log_mask(LOG_GUEST_ERROR,
- "pxa2xx GPIO: read from write only register GPSR\n");
- return 0;
-
- case GPCR: /* GPIO Pin-Output Clear registers */
- qemu_log_mask(LOG_GUEST_ERROR,
- "pxa2xx GPIO: read from write only register GPCR\n");
- return 0;
-
- case GRER: /* GPIO Rising-Edge Detect Enable registers */
- return s->rising[bank];
-
- case GFER: /* GPIO Falling-Edge Detect Enable registers */
- return s->falling[bank];
-
- case GAFR_L: /* GPIO Alternate Function registers */
- return s->gafr[bank * 2];
-
- case GAFR_U: /* GPIO Alternate Function registers */
- return s->gafr[bank * 2 + 1];
-
- case GPLR: /* GPIO Pin-Level registers */
- ret = (s->olevel[bank] & s->dir[bank]) |
- (s->ilevel[bank] & ~s->dir[bank]);
- qemu_irq_raise(s->read_notify);
- return ret;
-
- case GEDR: /* GPIO Edge Detect Status registers */
- return s->status[bank];
-
- default:
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n",
- __func__, offset);
- }
-
- return 0;
-}
-
-static void pxa2xx_gpio_write(void *opaque, hwaddr offset,
- uint64_t value, unsigned size)
-{
- PXA2xxGPIOInfo *s = (PXA2xxGPIOInfo *) opaque;
- int bank;
- if (offset >= 0x200)
- return;
-
- bank = pxa2xx_gpio_regs[offset].bank;
- switch (pxa2xx_gpio_regs[offset].reg) {
- case GPDR: /* GPIO Pin-Direction registers */
- s->dir[bank] = value;
- pxa2xx_gpio_handler_update(s);
- break;
-
- case GPSR: /* GPIO Pin-Output Set registers */
- s->olevel[bank] |= value;
- pxa2xx_gpio_handler_update(s);
- break;
-
- case GPCR: /* GPIO Pin-Output Clear registers */
- s->olevel[bank] &= ~value;
- pxa2xx_gpio_handler_update(s);
- break;
-
- case GRER: /* GPIO Rising-Edge Detect Enable registers */
- s->rising[bank] = value;
- break;
-
- case GFER: /* GPIO Falling-Edge Detect Enable registers */
- s->falling[bank] = value;
- break;
-
- case GAFR_L: /* GPIO Alternate Function registers */
- s->gafr[bank * 2] = value;
- break;
-
- case GAFR_U: /* GPIO Alternate Function registers */
- s->gafr[bank * 2 + 1] = value;
- break;
-
- case GEDR: /* GPIO Edge Detect Status registers */
- s->status[bank] &= ~value;
- pxa2xx_gpio_irq_update(s);
- break;
-
- default:
- qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset 0x%" HWADDR_PRIX "\n",
- __func__, offset);
- }
-}
-
-static const MemoryRegionOps pxa_gpio_ops = {
- .read = pxa2xx_gpio_read,
- .write = pxa2xx_gpio_write,
- .endianness = DEVICE_NATIVE_ENDIAN,
-};
-
-DeviceState *pxa2xx_gpio_init(hwaddr base,
- ARMCPU *cpu, DeviceState *pic, int lines)
-{
- DeviceState *dev;
-
- dev = qdev_new(TYPE_PXA2XX_GPIO);
- qdev_prop_set_int32(dev, "lines", lines);
- object_property_set_link(OBJECT(dev), "cpu", OBJECT(cpu), &error_abort);
- sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
-
- sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, base);
- sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
- qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_0));
- sysbus_connect_irq(SYS_BUS_DEVICE(dev), 1,
- qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_1));
- sysbus_connect_irq(SYS_BUS_DEVICE(dev), 2,
- qdev_get_gpio_in(pic, PXA2XX_PIC_GPIO_X));
-
- return dev;
-}
-
-static void pxa2xx_gpio_initfn(Object *obj)
-{
- SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
- DeviceState *dev = DEVICE(sbd);
- PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
-
- memory_region_init_io(&s->iomem, obj, &pxa_gpio_ops,
- s, "pxa2xx-gpio", 0x1000);
- sysbus_init_mmio(sbd, &s->iomem);
- sysbus_init_irq(sbd, &s->irq0);
- sysbus_init_irq(sbd, &s->irq1);
- sysbus_init_irq(sbd, &s->irqX);
-}
-
-static void pxa2xx_gpio_realize(DeviceState *dev, Error **errp)
-{
- PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
-
- qdev_init_gpio_in(dev, pxa2xx_gpio_set, s->lines);
- qdev_init_gpio_out(dev, s->handler, s->lines);
-}
-
-/*
- * Registers a callback to notify on GPLR reads. This normally
- * shouldn't be needed but it is used for the hack on Spitz machines.
- */
-void pxa2xx_gpio_read_notifier(DeviceState *dev, qemu_irq handler)
-{
- PXA2xxGPIOInfo *s = PXA2XX_GPIO(dev);
-
- s->read_notify = handler;
-}
-
-static const VMStateDescription vmstate_pxa2xx_gpio_regs = {
- .name = "pxa2xx-gpio",
- .version_id = 1,
- .minimum_version_id = 1,
- .fields = (const VMStateField[]) {
- VMSTATE_UINT32_ARRAY(ilevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
- VMSTATE_UINT32_ARRAY(olevel, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
- VMSTATE_UINT32_ARRAY(dir, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
- VMSTATE_UINT32_ARRAY(rising, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
- VMSTATE_UINT32_ARRAY(falling, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
- VMSTATE_UINT32_ARRAY(status, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
- VMSTATE_UINT32_ARRAY(gafr, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS * 2),
- VMSTATE_UINT32_ARRAY(prev_level, PXA2xxGPIOInfo, PXA2XX_GPIO_BANKS),
- VMSTATE_END_OF_LIST(),
- },
-};
-
-static Property pxa2xx_gpio_properties[] = {
- DEFINE_PROP_INT32("lines", PXA2xxGPIOInfo, lines, 0),
- DEFINE_PROP_LINK("cpu", PXA2xxGPIOInfo, cpu, TYPE_ARM_CPU, ARMCPU *),
- DEFINE_PROP_END_OF_LIST(),
-};
-
-static void pxa2xx_gpio_class_init(ObjectClass *klass, void *data)
-{
- DeviceClass *dc = DEVICE_CLASS(klass);
-
- dc->desc = "PXA2xx GPIO controller";
- device_class_set_props(dc, pxa2xx_gpio_properties);
- dc->vmsd = &vmstate_pxa2xx_gpio_regs;
- dc->realize = pxa2xx_gpio_realize;
-}
-
-static const TypeInfo pxa2xx_gpio_info = {
- .name = TYPE_PXA2XX_GPIO,
- .parent = TYPE_SYS_BUS_DEVICE,
- .instance_size = sizeof(PXA2xxGPIOInfo),
- .instance_init = pxa2xx_gpio_initfn,
- .class_init = pxa2xx_gpio_class_init,
-};
-
-static void pxa2xx_gpio_register_types(void)
-{
- type_register_static(&pxa2xx_gpio_info);
-}
-
-type_init(pxa2xx_gpio_register_types)
@@ -22,7 +22,7 @@ arm_ss.add(when: 'CONFIG_SABRELITE', if_true: files('sabrelite.c'))
arm_ss.add(when: 'CONFIG_ARM_V7M', if_true: files('armv7m.c'))
arm_ss.add(when: 'CONFIG_EXYNOS4', if_true: files('exynos4210.c'))
-arm_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx_gpio.c', 'pxa2xx_pic.c'))
+arm_ss.add(when: 'CONFIG_PXA2XX', if_true: files('pxa2xx_pic.c'))
arm_ss.add(when: 'CONFIG_DIGIC', if_true: files('digic.c'))
arm_ss.add(when: 'CONFIG_OMAP', if_true: files('omap1.c'))
arm_ss.add(when: 'CONFIG_ALLWINNER_A10', if_true: files('allwinner-a10.c', 'cubieboard.c'))