@@ -874,7 +874,6 @@ nSeries
M: Peter Maydell <peter.maydell@linaro.org>
L: qemu-arm@nongnu.org
S: Odd Fixes
-F: hw/arm/nseries.c
F: hw/display/blizzard.c
F: hw/input/lm832x.c
F: hw/input/tsc2005.c
@@ -885,8 +884,6 @@ F: include/hw/display/blizzard.h
F: include/hw/input/lm832x.h
F: include/hw/input/tsc2xxx.h
F: include/hw/misc/cbus.h
-F: tests/avocado/machine_arm_n8x0.py
-F: docs/system/arm/nseries.rst
Raspberry Pi
M: Peter Maydell <peter.maydell@linaro.org>
deleted file mode 100644
@@ -1,33 +0,0 @@
-Nokia N800 and N810 tablets (``n800``, ``n810``)
-================================================
-
-Nokia N800 and N810 internet tablets (known also as RX-34 and RX-44 /
-48) emulation supports the following elements:
-
-- Texas Instruments OMAP2420 System-on-chip (ARM1136 core)
-
-- RAM and non-volatile OneNAND Flash memories
-
-- Display connected to EPSON remote framebuffer chip and OMAP on-chip
- display controller and a LS041y3 MIPI DBI-C controller
-
-- TI TSC2301 (in N800) and TI TSC2005 (in N810) touchscreen
- controllers driven through SPI bus
-
-- National Semiconductor LM8323-controlled qwerty keyboard driven
- through |I2C| bus
-
-- Secure Digital card connected to OMAP MMC/SD host
-
-- Three OMAP on-chip UARTs and on-chip STI debugging console
-
-- Mentor Graphics \"Inventra\" dual-role USB controller embedded in a
- TI TUSB6010 chip - only USB host mode is supported
-
-- TI TMP105 temperature sensor driven through |I2C| bus
-
-- TI TWL92230C power management companion with an RTC on
- |I2C| bus
-
-- Nokia RETU and TAHVO multi-purpose chips with an RTC, connected
- through CBUS
@@ -92,7 +92,6 @@ undocumented; you can get a complete list by running
arm/emcraft-sf2
arm/musicpal
arm/kzm
- arm/nseries
arm/nrf
arm/nuvoton
arm/imx25-pdk
@@ -19,7 +19,6 @@
# CONFIG_MPS3R=n
# CONFIG_MUSCA=n
# CONFIG_SX1=n
-# CONFIG_NSERIES=n
# CONFIG_STELLARIS=n
# CONFIG_STM32VLDISCOVERY=n
# CONFIG_B_L475E_IOT01A=n
deleted file mode 100644
@@ -1,1473 +0,0 @@
-/*
- * Nokia N-series internet tablets.
- *
- * Copyright (C) 2007 Nokia Corporation
- * Written by Andrzej Zaborowski <andrew@openedhand.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 or
- * (at your option) version 3 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, see <http://www.gnu.org/licenses/>.
- */
-
-#include "qemu/osdep.h"
-#include "qapi/error.h"
-#include "cpu.h"
-#include "chardev/char.h"
-#include "qemu/cutils.h"
-#include "qemu/bswap.h"
-#include "qemu/hw-version.h"
-#include "sysemu/reset.h"
-#include "sysemu/runstate.h"
-#include "sysemu/sysemu.h"
-#include "hw/arm/omap.h"
-#include "hw/arm/boot.h"
-#include "hw/irq.h"
-#include "ui/console.h"
-#include "hw/boards.h"
-#include "hw/i2c/i2c.h"
-#include "hw/display/blizzard.h"
-#include "hw/input/lm832x.h"
-#include "hw/input/tsc2xxx.h"
-#include "hw/misc/cbus.h"
-#include "hw/sensor/tmp105.h"
-#include "hw/qdev-properties.h"
-#include "hw/block/flash.h"
-#include "hw/hw.h"
-#include "hw/loader.h"
-#include "hw/sysbus.h"
-#include "qemu/log.h"
-#include "qemu/error-report.h"
-
-
-/* Nokia N8x0 support */
-struct n800_s {
- struct omap_mpu_state_s *mpu;
-
- struct rfbi_chip_s blizzard;
- struct {
- void *opaque;
- uint32_t (*txrx)(void *opaque, uint32_t value, int len);
- uWireSlave *chip;
- } ts;
-
- int keymap[0x80];
- DeviceState *kbd;
-
- DeviceState *usb;
- void *retu;
- void *tahvo;
- DeviceState *nand;
-};
-
-/* GPIO pins */
-#define N8X0_TUSB_ENABLE_GPIO 0
-#define N800_MMC2_WP_GPIO 8
-#define N800_UNKNOWN_GPIO0 9 /* out */
-#define N810_MMC2_VIOSD_GPIO 9
-#define N810_HEADSET_AMP_GPIO 10
-#define N800_CAM_TURN_GPIO 12
-#define N810_GPS_RESET_GPIO 12
-#define N800_BLIZZARD_POWERDOWN_GPIO 15
-#define N800_MMC1_WP_GPIO 23
-#define N810_MMC2_VSD_GPIO 23
-#define N8X0_ONENAND_GPIO 26
-#define N810_BLIZZARD_RESET_GPIO 30
-#define N800_UNKNOWN_GPIO2 53 /* out */
-#define N8X0_TUSB_INT_GPIO 58
-#define N8X0_BT_WKUP_GPIO 61
-#define N8X0_STI_GPIO 62
-#define N8X0_CBUS_SEL_GPIO 64
-#define N8X0_CBUS_DAT_GPIO 65
-#define N8X0_CBUS_CLK_GPIO 66
-#define N8X0_WLAN_IRQ_GPIO 87
-#define N8X0_BT_RESET_GPIO 92
-#define N8X0_TEA5761_CS_GPIO 93
-#define N800_UNKNOWN_GPIO 94
-#define N810_TSC_RESET_GPIO 94
-#define N800_CAM_ACT_GPIO 95
-#define N810_GPS_WAKEUP_GPIO 95
-#define N8X0_MMC_CS_GPIO 96
-#define N8X0_WLAN_PWR_GPIO 97
-#define N8X0_BT_HOST_WKUP_GPIO 98
-#define N810_SPEAKER_AMP_GPIO 101
-#define N810_KB_LOCK_GPIO 102
-#define N800_TSC_TS_GPIO 103
-#define N810_TSC_TS_GPIO 106
-#define N8X0_HEADPHONE_GPIO 107
-#define N8X0_RETU_GPIO 108
-#define N800_TSC_KP_IRQ_GPIO 109
-#define N810_KEYBOARD_GPIO 109
-#define N800_BAT_COVER_GPIO 110
-#define N810_SLIDE_GPIO 110
-#define N8X0_TAHVO_GPIO 111
-#define N800_UNKNOWN_GPIO4 112 /* out */
-#define N810_SLEEPX_LED_GPIO 112
-#define N800_TSC_RESET_GPIO 118 /* ? */
-#define N810_AIC33_RESET_GPIO 118
-#define N800_TSC_UNKNOWN_GPIO 119 /* out */
-#define N8X0_TMP105_GPIO 125
-
-/* Config */
-#define BT_UART 0
-#define XLDR_LL_UART 1
-
-/* Addresses on the I2C bus 0 */
-#define N810_TLV320AIC33_ADDR 0x18 /* Audio CODEC */
-#define N8X0_TCM825x_ADDR 0x29 /* Camera */
-#define N810_LP5521_ADDR 0x32 /* LEDs */
-#define N810_TSL2563_ADDR 0x3d /* Light sensor */
-#define N810_LM8323_ADDR 0x45 /* Keyboard */
-/* Addresses on the I2C bus 1 */
-#define N8X0_TMP105_ADDR 0x48 /* Temperature sensor */
-#define N8X0_MENELAUS_ADDR 0x72 /* Power management */
-
-/* Chipselects on GPMC NOR interface */
-#define N8X0_ONENAND_CS 0
-#define N8X0_USB_ASYNC_CS 1
-#define N8X0_USB_SYNC_CS 4
-
-#define N8X0_BD_ADDR 0x00, 0x1a, 0x89, 0x9e, 0x3e, 0x81
-
-static void n800_mmc_cs_cb(void *opaque, int line, int level)
-{
- /* TODO: this seems to actually be connected to the menelaus, to
- * which also both MMC slots connect. */
- omap_mmc_enable((struct omap_mmc_s *) opaque, !level);
-}
-
-static void n8x0_gpio_setup(struct n800_s *s)
-{
- qdev_connect_gpio_out(s->mpu->gpio, N8X0_MMC_CS_GPIO,
- qemu_allocate_irq(n800_mmc_cs_cb, s->mpu->mmc, 0));
- qemu_irq_lower(qdev_get_gpio_in(s->mpu->gpio, N800_BAT_COVER_GPIO));
-}
-
-#define MAEMO_CAL_HEADER(...) \
- 'C', 'o', 'n', 'F', 0x02, 0x00, 0x04, 0x00, \
- __VA_ARGS__, \
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-
-static const uint8_t n8x0_cal_wlan_mac[] = {
- MAEMO_CAL_HEADER('w', 'l', 'a', 'n', '-', 'm', 'a', 'c')
- 0x1c, 0x00, 0x00, 0x00, 0x47, 0xd6, 0x69, 0xb3,
- 0x30, 0x08, 0xa0, 0x83, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x1a, 0x00, 0x00, 0x00,
- 0x89, 0x00, 0x00, 0x00, 0x9e, 0x00, 0x00, 0x00,
- 0x5d, 0x00, 0x00, 0x00, 0xc1, 0x00, 0x00, 0x00,
-};
-
-static const uint8_t n8x0_cal_bt_id[] = {
- MAEMO_CAL_HEADER('b', 't', '-', 'i', 'd', 0, 0, 0)
- 0x0a, 0x00, 0x00, 0x00, 0xa3, 0x4b, 0xf6, 0x96,
- 0xa8, 0xeb, 0xb2, 0x41, 0x00, 0x00, 0x00, 0x00,
- N8X0_BD_ADDR,
-};
-
-static void n8x0_nand_setup(struct n800_s *s)
-{
- char *otp_region;
- DriveInfo *dinfo;
-
- s->nand = qdev_new("onenand");
- qdev_prop_set_uint16(s->nand, "manufacturer_id", NAND_MFR_SAMSUNG);
- /* Either 0x40 or 0x48 are OK for the device ID */
- qdev_prop_set_uint16(s->nand, "device_id", 0x48);
- qdev_prop_set_uint16(s->nand, "version_id", 0);
- qdev_prop_set_int32(s->nand, "shift", 1);
- dinfo = drive_get(IF_MTD, 0, 0);
- if (dinfo) {
- qdev_prop_set_drive_err(s->nand, "drive", blk_by_legacy_dinfo(dinfo),
- &error_fatal);
- }
- sysbus_realize_and_unref(SYS_BUS_DEVICE(s->nand), &error_fatal);
- sysbus_connect_irq(SYS_BUS_DEVICE(s->nand), 0,
- qdev_get_gpio_in(s->mpu->gpio, N8X0_ONENAND_GPIO));
- omap_gpmc_attach(s->mpu->gpmc, N8X0_ONENAND_CS,
- sysbus_mmio_get_region(SYS_BUS_DEVICE(s->nand), 0));
- otp_region = onenand_raw_otp(s->nand);
-
- memcpy(otp_region + 0x000, n8x0_cal_wlan_mac, sizeof(n8x0_cal_wlan_mac));
- memcpy(otp_region + 0x800, n8x0_cal_bt_id, sizeof(n8x0_cal_bt_id));
- /* XXX: in theory should also update the OOB for both pages */
-}
-
-static qemu_irq n8x0_system_powerdown;
-
-static void n8x0_powerdown_req(Notifier *n, void *opaque)
-{
- qemu_irq_raise(n8x0_system_powerdown);
-}
-
-static Notifier n8x0_system_powerdown_notifier = {
- .notify = n8x0_powerdown_req
-};
-
-static void n8x0_i2c_setup(struct n800_s *s)
-{
- DeviceState *dev;
- qemu_irq tmp_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TMP105_GPIO);
- I2CBus *i2c = omap_i2c_bus(s->mpu->i2c[0]);
-
- /* Attach a menelaus PM chip */
- dev = DEVICE(i2c_slave_create_simple(i2c, "twl92230", N8X0_MENELAUS_ADDR));
- qdev_connect_gpio_out(dev, 3,
- qdev_get_gpio_in(s->mpu->ih[0],
- OMAP_INT_24XX_SYS_NIRQ));
-
- n8x0_system_powerdown = qdev_get_gpio_in(dev, 3);
- qemu_register_powerdown_notifier(&n8x0_system_powerdown_notifier);
-
- /* Attach a TMP105 PM chip (A0 wired to ground) */
- dev = DEVICE(i2c_slave_create_simple(i2c, TYPE_TMP105, N8X0_TMP105_ADDR));
- qdev_connect_gpio_out(dev, 0, tmp_irq);
-}
-
-/* Touchscreen and keypad controller */
-static const MouseTransformInfo n800_pointercal = {
- .x = 800,
- .y = 480,
- .a = { 14560, -68, -3455208, -39, -9621, 35152972, 65536 },
-};
-
-static const MouseTransformInfo n810_pointercal = {
- .x = 800,
- .y = 480,
- .a = { 15041, 148, -4731056, 171, -10238, 35933380, 65536 },
-};
-
-#define RETU_KEYCODE 61 /* F3 */
-
-static void n800_key_event(void *opaque, int keycode)
-{
- struct n800_s *s = (struct n800_s *) opaque;
- int code = s->keymap[keycode & 0x7f];
-
- if (code == -1) {
- if ((keycode & 0x7f) == RETU_KEYCODE) {
- retu_key_event(s->retu, !(keycode & 0x80));
- }
- return;
- }
-
- tsc210x_key_event(s->ts.chip, code, !(keycode & 0x80));
-}
-
-static const int n800_keys[16] = {
- -1,
- 72, /* Up */
- 63, /* Home (F5) */
- -1,
- 75, /* Left */
- 28, /* Enter */
- 77, /* Right */
- -1,
- 1, /* Cycle (ESC) */
- 80, /* Down */
- 62, /* Menu (F4) */
- -1,
- 66, /* Zoom- (F8) */
- 64, /* FullScreen (F6) */
- 65, /* Zoom+ (F7) */
- -1,
-};
-
-static void n800_tsc_kbd_setup(struct n800_s *s)
-{
- int i;
-
- /* XXX: are the three pins inverted inside the chip between the
- * tsc and the cpu (N4111)? */
- qemu_irq penirq = NULL; /* NC */
- qemu_irq kbirq = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_KP_IRQ_GPIO);
- qemu_irq dav = qdev_get_gpio_in(s->mpu->gpio, N800_TSC_TS_GPIO);
-
- s->ts.chip = tsc2301_init(penirq, kbirq, dav);
- s->ts.opaque = s->ts.chip->opaque;
- s->ts.txrx = tsc210x_txrx;
-
- for (i = 0; i < 0x80; i++) {
- s->keymap[i] = -1;
- }
- for (i = 0; i < 0x10; i++) {
- if (n800_keys[i] >= 0) {
- s->keymap[n800_keys[i]] = i;
- }
- }
-
- qemu_add_kbd_event_handler(n800_key_event, s);
-
- tsc210x_set_transform(s->ts.chip, &n800_pointercal);
-}
-
-static void n810_tsc_setup(struct n800_s *s)
-{
- qemu_irq pintdav = qdev_get_gpio_in(s->mpu->gpio, N810_TSC_TS_GPIO);
-
- s->ts.opaque = tsc2005_init(pintdav);
- s->ts.txrx = tsc2005_txrx;
-
- tsc2005_set_transform(s->ts.opaque, &n810_pointercal);
-}
-
-/* N810 Keyboard controller */
-static void n810_key_event(void *opaque, int keycode)
-{
- struct n800_s *s = (struct n800_s *) opaque;
- int code = s->keymap[keycode & 0x7f];
-
- if (code == -1) {
- if ((keycode & 0x7f) == RETU_KEYCODE) {
- retu_key_event(s->retu, !(keycode & 0x80));
- }
- return;
- }
-
- lm832x_key_event(s->kbd, code, !(keycode & 0x80));
-}
-
-#define M 0
-
-static const int n810_keys[0x80] = {
- [0x01] = 16, /* Q */
- [0x02] = 37, /* K */
- [0x03] = 24, /* O */
- [0x04] = 25, /* P */
- [0x05] = 14, /* Backspace */
- [0x06] = 30, /* A */
- [0x07] = 31, /* S */
- [0x08] = 32, /* D */
- [0x09] = 33, /* F */
- [0x0a] = 34, /* G */
- [0x0b] = 35, /* H */
- [0x0c] = 36, /* J */
-
- [0x11] = 17, /* W */
- [0x12] = 62, /* Menu (F4) */
- [0x13] = 38, /* L */
- [0x14] = 40, /* ' (Apostrophe) */
- [0x16] = 44, /* Z */
- [0x17] = 45, /* X */
- [0x18] = 46, /* C */
- [0x19] = 47, /* V */
- [0x1a] = 48, /* B */
- [0x1b] = 49, /* N */
- [0x1c] = 42, /* Shift (Left shift) */
- [0x1f] = 65, /* Zoom+ (F7) */
-
- [0x21] = 18, /* E */
- [0x22] = 39, /* ; (Semicolon) */
- [0x23] = 12, /* - (Minus) */
- [0x24] = 13, /* = (Equal) */
- [0x2b] = 56, /* Fn (Left Alt) */
- [0x2c] = 50, /* M */
- [0x2f] = 66, /* Zoom- (F8) */
-
- [0x31] = 19, /* R */
- [0x32] = 29 | M, /* Right Ctrl */
- [0x34] = 57, /* Space */
- [0x35] = 51, /* , (Comma) */
- [0x37] = 72 | M, /* Up */
- [0x3c] = 82 | M, /* Compose (Insert) */
- [0x3f] = 64, /* FullScreen (F6) */
-
- [0x41] = 20, /* T */
- [0x44] = 52, /* . (Dot) */
- [0x46] = 77 | M, /* Right */
- [0x4f] = 63, /* Home (F5) */
- [0x51] = 21, /* Y */
- [0x53] = 80 | M, /* Down */
- [0x55] = 28, /* Enter */
- [0x5f] = 1, /* Cycle (ESC) */
-
- [0x61] = 22, /* U */
- [0x64] = 75 | M, /* Left */
-
- [0x71] = 23, /* I */
-#if 0
- [0x75] = 28 | M, /* KP Enter (KP Enter) */
-#else
- [0x75] = 15, /* KP Enter (Tab) */
-#endif
-};
-
-#undef M
-
-static void n810_kbd_setup(struct n800_s *s)
-{
- qemu_irq kbd_irq = qdev_get_gpio_in(s->mpu->gpio, N810_KEYBOARD_GPIO);
- int i;
-
- for (i = 0; i < 0x80; i++) {
- s->keymap[i] = -1;
- }
- for (i = 0; i < 0x80; i++) {
- if (n810_keys[i] > 0) {
- s->keymap[n810_keys[i]] = i;
- }
- }
-
- qemu_add_kbd_event_handler(n810_key_event, s);
-
- /* Attach the LM8322 keyboard to the I2C bus,
- * should happen in n8x0_i2c_setup and s->kbd be initialised here. */
- s->kbd = DEVICE(i2c_slave_create_simple(omap_i2c_bus(s->mpu->i2c[0]),
- TYPE_LM8323, N810_LM8323_ADDR));
- qdev_connect_gpio_out(s->kbd, 0, kbd_irq);
-}
-
-/* LCD MIPI DBI-C controller (URAL) */
-struct mipid_s {
- int resp[4];
- int param[4];
- int p;
- int pm;
- int cmd;
-
- int sleep;
- int booster;
- int te;
- int selfcheck;
- int partial;
- int normal;
- int vscr;
- int invert;
- int onoff;
- int gamma;
- uint32_t id;
-};
-
-static void mipid_reset(struct mipid_s *s)
-{
- s->pm = 0;
- s->cmd = 0;
-
- s->sleep = 1;
- s->booster = 0;
- s->selfcheck =
- (1 << 7) | /* Register loading OK. */
- (1 << 5) | /* The chip is attached. */
- (1 << 4); /* Display glass still in one piece. */
- s->te = 0;
- s->partial = 0;
- s->normal = 1;
- s->vscr = 0;
- s->invert = 0;
- s->onoff = 1;
- s->gamma = 0;
-}
-
-static uint32_t mipid_txrx(void *opaque, uint32_t cmd, int len)
-{
- struct mipid_s *s = (struct mipid_s *) opaque;
- uint8_t ret;
-
- if (len > 9) {
- hw_error("%s: FIXME: bad SPI word width %i\n", __func__, len);
- }
-
- if (s->p >= ARRAY_SIZE(s->resp)) {
- ret = 0;
- } else {
- ret = s->resp[s->p++];
- }
- if (s->pm-- > 0) {
- s->param[s->pm] = cmd;
- } else {
- s->cmd = cmd;
- }
-
- switch (s->cmd) {
- case 0x00: /* NOP */
- break;
-
- case 0x01: /* SWRESET */
- mipid_reset(s);
- break;
-
- case 0x02: /* BSTROFF */
- s->booster = 0;
- break;
- case 0x03: /* BSTRON */
- s->booster = 1;
- break;
-
- case 0x04: /* RDDID */
- s->p = 0;
- s->resp[0] = (s->id >> 16) & 0xff;
- s->resp[1] = (s->id >> 8) & 0xff;
- s->resp[2] = (s->id >> 0) & 0xff;
- break;
-
- case 0x06: /* RD_RED */
- case 0x07: /* RD_GREEN */
- /* XXX the bootloader sometimes issues RD_BLUE meaning RDDID so
- * for the bootloader one needs to change this. */
- case 0x08: /* RD_BLUE */
- s->p = 0;
- /* TODO: return first pixel components */
- s->resp[0] = 0x01;
- break;
-
- case 0x09: /* RDDST */
- s->p = 0;
- s->resp[0] = s->booster << 7;
- s->resp[1] = (5 << 4) | (s->partial << 2) |
- (s->sleep << 1) | s->normal;
- s->resp[2] = (s->vscr << 7) | (s->invert << 5) |
- (s->onoff << 2) | (s->te << 1) | (s->gamma >> 2);
- s->resp[3] = s->gamma << 6;
- break;
-
- case 0x0a: /* RDDPM */
- s->p = 0;
- s->resp[0] = (s->onoff << 2) | (s->normal << 3) | (s->sleep << 4) |
- (s->partial << 5) | (s->sleep << 6) | (s->booster << 7);
- break;
- case 0x0b: /* RDDMADCTR */
- s->p = 0;
- s->resp[0] = 0;
- break;
- case 0x0c: /* RDDCOLMOD */
- s->p = 0;
- s->resp[0] = 5; /* 65K colours */
- break;
- case 0x0d: /* RDDIM */
- s->p = 0;
- s->resp[0] = (s->invert << 5) | (s->vscr << 7) | s->gamma;
- break;
- case 0x0e: /* RDDSM */
- s->p = 0;
- s->resp[0] = s->te << 7;
- break;
- case 0x0f: /* RDDSDR */
- s->p = 0;
- s->resp[0] = s->selfcheck;
- break;
-
- case 0x10: /* SLPIN */
- s->sleep = 1;
- break;
- case 0x11: /* SLPOUT */
- s->sleep = 0;
- s->selfcheck ^= 1 << 6; /* POFF self-diagnosis Ok */
- break;
-
- case 0x12: /* PTLON */
- s->partial = 1;
- s->normal = 0;
- s->vscr = 0;
- break;
- case 0x13: /* NORON */
- s->partial = 0;
- s->normal = 1;
- s->vscr = 0;
- break;
-
- case 0x20: /* INVOFF */
- s->invert = 0;
- break;
- case 0x21: /* INVON */
- s->invert = 1;
- break;
-
- case 0x22: /* APOFF */
- case 0x23: /* APON */
- goto bad_cmd;
-
- case 0x25: /* WRCNTR */
- if (s->pm < 0) {
- s->pm = 1;
- }
- goto bad_cmd;
-
- case 0x26: /* GAMSET */
- if (!s->pm) {
- s->gamma = ctz32(s->param[0] & 0xf);
- if (s->gamma == 32) {
- s->gamma = -1; /* XXX: should this be 0? */
- }
- } else if (s->pm < 0) {
- s->pm = 1;
- }
- break;
-
- case 0x28: /* DISPOFF */
- s->onoff = 0;
- break;
- case 0x29: /* DISPON */
- s->onoff = 1;
- break;
-
- case 0x2a: /* CASET */
- case 0x2b: /* RASET */
- case 0x2c: /* RAMWR */
- case 0x2d: /* RGBSET */
- case 0x2e: /* RAMRD */
- case 0x30: /* PTLAR */
- case 0x33: /* SCRLAR */
- goto bad_cmd;
-
- case 0x34: /* TEOFF */
- s->te = 0;
- break;
- case 0x35: /* TEON */
- if (!s->pm) {
- s->te = 1;
- } else if (s->pm < 0) {
- s->pm = 1;
- }
- break;
-
- case 0x36: /* MADCTR */
- goto bad_cmd;
-
- case 0x37: /* VSCSAD */
- s->partial = 0;
- s->normal = 0;
- s->vscr = 1;
- break;
-
- case 0x38: /* IDMOFF */
- case 0x39: /* IDMON */
- case 0x3a: /* COLMOD */
- goto bad_cmd;
-
- case 0xb0: /* CLKINT / DISCTL */
- case 0xb1: /* CLKEXT */
- if (s->pm < 0) {
- s->pm = 2;
- }
- break;
-
- case 0xb4: /* FRMSEL */
- break;
-
- case 0xb5: /* FRM8SEL */
- case 0xb6: /* TMPRNG / INIESC */
- case 0xb7: /* TMPHIS / NOP2 */
- case 0xb8: /* TMPREAD / MADCTL */
- case 0xba: /* DISTCTR */
- case 0xbb: /* EPVOL */
- goto bad_cmd;
-
- case 0xbd: /* Unknown */
- s->p = 0;
- s->resp[0] = 0;
- s->resp[1] = 1;
- break;
-
- case 0xc2: /* IFMOD */
- if (s->pm < 0) {
- s->pm = 2;
- }
- break;
-
- case 0xc6: /* PWRCTL */
- case 0xc7: /* PPWRCTL */
- case 0xd0: /* EPWROUT */
- case 0xd1: /* EPWRIN */
- case 0xd4: /* RDEV */
- case 0xd5: /* RDRR */
- goto bad_cmd;
-
- case 0xda: /* RDID1 */
- s->p = 0;
- s->resp[0] = (s->id >> 16) & 0xff;
- break;
- case 0xdb: /* RDID2 */
- s->p = 0;
- s->resp[0] = (s->id >> 8) & 0xff;
- break;
- case 0xdc: /* RDID3 */
- s->p = 0;
- s->resp[0] = (s->id >> 0) & 0xff;
- break;
-
- default:
- bad_cmd:
- qemu_log_mask(LOG_GUEST_ERROR,
- "%s: unknown command 0x%02x\n", __func__, s->cmd);
- break;
- }
-
- return ret;
-}
-
-static void *mipid_init(void)
-{
- struct mipid_s *s = g_malloc0(sizeof(*s));
-
- s->id = 0x838f03;
- mipid_reset(s);
-
- return s;
-}
-
-static void n8x0_spi_setup(struct n800_s *s)
-{
- void *tsc = s->ts.opaque;
- void *mipid = mipid_init();
-
- omap_mcspi_attach(s->mpu->mcspi[0], s->ts.txrx, tsc, 0);
- omap_mcspi_attach(s->mpu->mcspi[0], mipid_txrx, mipid, 1);
-}
-
-/* This task is normally performed by the bootloader. If we're loading
- * a kernel directly, we need to enable the Blizzard ourselves. */
-static void n800_dss_init(struct rfbi_chip_s *chip)
-{
- uint8_t *fb_blank;
-
- chip->write(chip->opaque, 0, 0x2a); /* LCD Width register */
- chip->write(chip->opaque, 1, 0x64);
- chip->write(chip->opaque, 0, 0x2c); /* LCD HNDP register */
- chip->write(chip->opaque, 1, 0x1e);
- chip->write(chip->opaque, 0, 0x2e); /* LCD Height 0 register */
- chip->write(chip->opaque, 1, 0xe0);
- chip->write(chip->opaque, 0, 0x30); /* LCD Height 1 register */
- chip->write(chip->opaque, 1, 0x01);
- chip->write(chip->opaque, 0, 0x32); /* LCD VNDP register */
- chip->write(chip->opaque, 1, 0x06);
- chip->write(chip->opaque, 0, 0x68); /* Display Mode register */
- chip->write(chip->opaque, 1, 1); /* Enable bit */
-
- chip->write(chip->opaque, 0, 0x6c);
- chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */
- chip->write(chip->opaque, 1, 0x00); /* Input X Start Position */
- chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */
- chip->write(chip->opaque, 1, 0x00); /* Input Y Start Position */
- chip->write(chip->opaque, 1, 0x1f); /* Input X End Position */
- chip->write(chip->opaque, 1, 0x03); /* Input X End Position */
- chip->write(chip->opaque, 1, 0xdf); /* Input Y End Position */
- chip->write(chip->opaque, 1, 0x01); /* Input Y End Position */
- chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */
- chip->write(chip->opaque, 1, 0x00); /* Output X Start Position */
- chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */
- chip->write(chip->opaque, 1, 0x00); /* Output Y Start Position */
- chip->write(chip->opaque, 1, 0x1f); /* Output X End Position */
- chip->write(chip->opaque, 1, 0x03); /* Output X End Position */
- chip->write(chip->opaque, 1, 0xdf); /* Output Y End Position */
- chip->write(chip->opaque, 1, 0x01); /* Output Y End Position */
- chip->write(chip->opaque, 1, 0x01); /* Input Data Format */
- chip->write(chip->opaque, 1, 0x01); /* Data Source Select */
-
- fb_blank = memset(g_malloc(800 * 480 * 2), 0xff, 800 * 480 * 2);
- /* Display Memory Data Port */
- chip->block(chip->opaque, 1, fb_blank, 800 * 480 * 2, 800);
- g_free(fb_blank);
-}
-
-static void n8x0_dss_setup(struct n800_s *s)
-{
- s->blizzard.opaque = s1d13745_init(NULL);
- s->blizzard.block = s1d13745_write_block;
- s->blizzard.write = s1d13745_write;
- s->blizzard.read = s1d13745_read;
-
- omap_rfbi_attach(s->mpu->dss, 0, &s->blizzard);
-}
-
-static void n8x0_cbus_setup(struct n800_s *s)
-{
- qemu_irq dat_out = qdev_get_gpio_in(s->mpu->gpio, N8X0_CBUS_DAT_GPIO);
- qemu_irq retu_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_RETU_GPIO);
- qemu_irq tahvo_irq = qdev_get_gpio_in(s->mpu->gpio, N8X0_TAHVO_GPIO);
-
- CBus *cbus = cbus_init(dat_out);
-
- qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_CLK_GPIO, cbus->clk);
- qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_DAT_GPIO, cbus->dat);
- qdev_connect_gpio_out(s->mpu->gpio, N8X0_CBUS_SEL_GPIO, cbus->sel);
-
- cbus_attach(cbus, s->retu = retu_init(retu_irq, 1));
- cbus_attach(cbus, s->tahvo = tahvo_init(tahvo_irq, 1));
-}
-
-static void n8x0_usb_setup(struct n800_s *s)
-{
- SysBusDevice *dev;
- s->usb = qdev_new("tusb6010");
- dev = SYS_BUS_DEVICE(s->usb);
- sysbus_realize_and_unref(dev, &error_fatal);
- sysbus_connect_irq(dev, 0,
- qdev_get_gpio_in(s->mpu->gpio, N8X0_TUSB_INT_GPIO));
- /* Using the NOR interface */
- omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_ASYNC_CS,
- sysbus_mmio_get_region(dev, 0));
- omap_gpmc_attach(s->mpu->gpmc, N8X0_USB_SYNC_CS,
- sysbus_mmio_get_region(dev, 1));
- qdev_connect_gpio_out(s->mpu->gpio, N8X0_TUSB_ENABLE_GPIO,
- qdev_get_gpio_in(s->usb, 0)); /* tusb_pwr */
-}
-
-/* Setup done before the main bootloader starts by some early setup code
- * - used when we want to run the main bootloader in emulation. This
- * isn't documented. */
-static const uint32_t n800_pinout[104] = {
- 0x080f00d8, 0x00d40808, 0x03080808, 0x080800d0,
- 0x00dc0808, 0x0b0f0f00, 0x080800b4, 0x00c00808,
- 0x08080808, 0x180800c4, 0x00b80000, 0x08080808,
- 0x080800bc, 0x00cc0808, 0x08081818, 0x18180128,
- 0x01241800, 0x18181818, 0x000000f0, 0x01300000,
- 0x00001b0b, 0x1b0f0138, 0x00e0181b, 0x1b031b0b,
- 0x180f0078, 0x00740018, 0x0f0f0f1a, 0x00000080,
- 0x007c0000, 0x00000000, 0x00000088, 0x00840000,
- 0x00000000, 0x00000094, 0x00980300, 0x0f180003,
- 0x0000008c, 0x00900f0f, 0x0f0f1b00, 0x0f00009c,
- 0x01140000, 0x1b1b0f18, 0x0818013c, 0x01400008,
- 0x00001818, 0x000b0110, 0x010c1800, 0x0b030b0f,
- 0x181800f4, 0x00f81818, 0x00000018, 0x000000fc,
- 0x00401808, 0x00000000, 0x0f1b0030, 0x003c0008,
- 0x00000000, 0x00000038, 0x00340000, 0x00000000,
- 0x1a080070, 0x00641a1a, 0x08080808, 0x08080060,
- 0x005c0808, 0x08080808, 0x08080058, 0x00540808,
- 0x08080808, 0x0808006c, 0x00680808, 0x08080808,
- 0x000000a8, 0x00b00000, 0x08080808, 0x000000a0,
- 0x00a40000, 0x00000000, 0x08ff0050, 0x004c0808,
- 0xffffffff, 0xffff0048, 0x0044ffff, 0xffffffff,
- 0x000000ac, 0x01040800, 0x08080b0f, 0x18180100,
- 0x01081818, 0x0b0b1808, 0x1a0300e4, 0x012c0b1a,
- 0x02020018, 0x0b000134, 0x011c0800, 0x0b1b1b00,
- 0x0f0000c8, 0x00ec181b, 0x000f0f02, 0x00180118,
- 0x01200000, 0x0f0b1b1b, 0x0f0200e8, 0x0000020b,
-};
-
-static void n800_setup_nolo_tags(void *sram_base)
-{
- int i;
- uint32_t *p = sram_base + 0x8000;
- uint32_t *v = sram_base + 0xa000;
-
- memset(p, 0, 0x3000);
-
- strcpy((void *) (p + 0), "QEMU N800");
-
- strcpy((void *) (p + 8), "F5");
-
- stl_p(p + 10, 0x04f70000);
- strcpy((void *) (p + 9), "RX-34");
-
- /* RAM size in MB? */
- stl_p(p + 12, 0x80);
-
- /* Pointer to the list of tags */
- stl_p(p + 13, OMAP2_SRAM_BASE + 0x9000);
-
- /* The NOLO tags start here */
- p = sram_base + 0x9000;
-#define ADD_TAG(tag, len) \
- stw_p((uint16_t *) p + 0, tag); \
- stw_p((uint16_t *) p + 1, len); p++; \
- stl_p(p++, OMAP2_SRAM_BASE | (((void *) v - sram_base) & 0xffff));
-
- /* OMAP STI console? Pin out settings? */
- ADD_TAG(0x6e01, 414);
- for (i = 0; i < ARRAY_SIZE(n800_pinout); i++) {
- stl_p(v++, n800_pinout[i]);
- }
-
- /* Kernel memsize? */
- ADD_TAG(0x6e05, 1);
- stl_p(v++, 2);
-
- /* NOLO serial console */
- ADD_TAG(0x6e02, 4);
- stl_p(v++, XLDR_LL_UART); /* UART number (1 - 3) */
-
-#if 0
- /* CBUS settings (Retu/AVilma) */
- ADD_TAG(0x6e03, 6);
- stw_p((uint16_t *) v + 0, 65); /* CBUS GPIO0 */
- stw_p((uint16_t *) v + 1, 66); /* CBUS GPIO1 */
- stw_p((uint16_t *) v + 2, 64); /* CBUS GPIO2 */
- v += 2;
-#endif
-
- /* Nokia ASIC BB5 (Retu/Tahvo) */
- ADD_TAG(0x6e0a, 4);
- stw_p((uint16_t *) v + 0, 111); /* "Retu" interrupt GPIO */
- stw_p((uint16_t *) v + 1, 108); /* "Tahvo" interrupt GPIO */
- v++;
-
- /* LCD console? */
- ADD_TAG(0x6e04, 4);
- stw_p((uint16_t *) v + 0, 30); /* ??? */
- stw_p((uint16_t *) v + 1, 24); /* ??? */
- v++;
-
-#if 0
- /* LCD settings */
- ADD_TAG(0x6e06, 2);
- stw_p((uint16_t *) (v++), 15); /* ??? */
-#endif
-
- /* I^2C (Menelaus) */
- ADD_TAG(0x6e07, 4);
- stl_p(v++, 0x00720000); /* ??? */
-
- /* Unknown */
- ADD_TAG(0x6e0b, 6);
- stw_p((uint16_t *) v + 0, 94); /* ??? */
- stw_p((uint16_t *) v + 1, 23); /* ??? */
- stw_p((uint16_t *) v + 2, 0); /* ??? */
- v += 2;
-
- /* OMAP gpio switch info */
- ADD_TAG(0x6e0c, 80);
- strcpy((void *) v, "bat_cover"); v += 3;
- stw_p((uint16_t *) v + 0, 110); /* GPIO num ??? */
- stw_p((uint16_t *) v + 1, 1); /* GPIO num ??? */
- v += 2;
- strcpy((void *) v, "cam_act"); v += 3;
- stw_p((uint16_t *) v + 0, 95); /* GPIO num ??? */
- stw_p((uint16_t *) v + 1, 32); /* GPIO num ??? */
- v += 2;
- strcpy((void *) v, "cam_turn"); v += 3;
- stw_p((uint16_t *) v + 0, 12); /* GPIO num ??? */
- stw_p((uint16_t *) v + 1, 33); /* GPIO num ??? */
- v += 2;
- strcpy((void *) v, "headphone"); v += 3;
- stw_p((uint16_t *) v + 0, 107); /* GPIO num ??? */
- stw_p((uint16_t *) v + 1, 17); /* GPIO num ??? */
- v += 2;
-
- /* Bluetooth */
- ADD_TAG(0x6e0e, 12);
- stl_p(v++, 0x5c623d01); /* ??? */
- stl_p(v++, 0x00000201); /* ??? */
- stl_p(v++, 0x00000000); /* ??? */
-
- /* CX3110x WLAN settings */
- ADD_TAG(0x6e0f, 8);
- stl_p(v++, 0x00610025); /* ??? */
- stl_p(v++, 0xffff0057); /* ??? */
-
- /* MMC host settings */
- ADD_TAG(0x6e10, 12);
- stl_p(v++, 0xffff000f); /* ??? */
- stl_p(v++, 0xffffffff); /* ??? */
- stl_p(v++, 0x00000060); /* ??? */
-
- /* OneNAND chip select */
- ADD_TAG(0x6e11, 10);
- stl_p(v++, 0x00000401); /* ??? */
- stl_p(v++, 0x0002003a); /* ??? */
- stl_p(v++, 0x00000002); /* ??? */
-
- /* TEA5761 sensor settings */
- ADD_TAG(0x6e12, 2);
- stl_p(v++, 93); /* GPIO num ??? */
-
-#if 0
- /* Unknown tag */
- ADD_TAG(6e09, 0);
-
- /* Kernel UART / console */
- ADD_TAG(6e12, 0);
-#endif
-
- /* End of the list */
- stl_p(p++, 0x00000000);
- stl_p(p++, 0x00000000);
-}
-
-/* This task is normally performed by the bootloader. If we're loading
- * a kernel directly, we need to set up GPMC mappings ourselves. */
-static void n800_gpmc_init(struct n800_s *s)
-{
- uint32_t config7 =
- (0xf << 8) | /* MASKADDRESS */
- (1 << 6) | /* CSVALID */
- (4 << 0); /* BASEADDRESS */
-
- cpu_physical_memory_write(0x6800a078, /* GPMC_CONFIG7_0 */
- &config7, sizeof(config7));
-}
-
-/* Setup sequence done by the bootloader */
-static void n8x0_boot_init(void *opaque)
-{
- struct n800_s *s = (struct n800_s *) opaque;
- uint32_t buf;
-
- /* PRCM setup */
-#define omap_writel(addr, val) \
- buf = (val); \
- cpu_physical_memory_write(addr, &buf, sizeof(buf))
-
- omap_writel(0x48008060, 0x41); /* PRCM_CLKSRC_CTRL */
- omap_writel(0x48008070, 1); /* PRCM_CLKOUT_CTRL */
- omap_writel(0x48008078, 0); /* PRCM_CLKEMUL_CTRL */
- omap_writel(0x48008090, 0); /* PRCM_VOLTSETUP */
- omap_writel(0x48008094, 0); /* PRCM_CLKSSETUP */
- omap_writel(0x48008098, 0); /* PRCM_POLCTRL */
- omap_writel(0x48008140, 2); /* CM_CLKSEL_MPU */
- omap_writel(0x48008148, 0); /* CM_CLKSTCTRL_MPU */
- omap_writel(0x48008158, 1); /* RM_RSTST_MPU */
- omap_writel(0x480081c8, 0x15); /* PM_WKDEP_MPU */
- omap_writel(0x480081d4, 0x1d4); /* PM_EVGENCTRL_MPU */
- omap_writel(0x480081d8, 0); /* PM_EVEGENONTIM_MPU */
- omap_writel(0x480081dc, 0); /* PM_EVEGENOFFTIM_MPU */
- omap_writel(0x480081e0, 0xc); /* PM_PWSTCTRL_MPU */
- omap_writel(0x48008200, 0x047e7ff7); /* CM_FCLKEN1_CORE */
- omap_writel(0x48008204, 0x00000004); /* CM_FCLKEN2_CORE */
- omap_writel(0x48008210, 0x047e7ff1); /* CM_ICLKEN1_CORE */
- omap_writel(0x48008214, 0x00000004); /* CM_ICLKEN2_CORE */
- omap_writel(0x4800821c, 0x00000000); /* CM_ICLKEN4_CORE */
- omap_writel(0x48008230, 0); /* CM_AUTOIDLE1_CORE */
- omap_writel(0x48008234, 0); /* CM_AUTOIDLE2_CORE */
- omap_writel(0x48008238, 7); /* CM_AUTOIDLE3_CORE */
- omap_writel(0x4800823c, 0); /* CM_AUTOIDLE4_CORE */
- omap_writel(0x48008240, 0x04360626); /* CM_CLKSEL1_CORE */
- omap_writel(0x48008244, 0x00000014); /* CM_CLKSEL2_CORE */
- omap_writel(0x48008248, 0); /* CM_CLKSTCTRL_CORE */
- omap_writel(0x48008300, 0x00000000); /* CM_FCLKEN_GFX */
- omap_writel(0x48008310, 0x00000000); /* CM_ICLKEN_GFX */
- omap_writel(0x48008340, 0x00000001); /* CM_CLKSEL_GFX */
- omap_writel(0x48008400, 0x00000004); /* CM_FCLKEN_WKUP */
- omap_writel(0x48008410, 0x00000004); /* CM_ICLKEN_WKUP */
- omap_writel(0x48008440, 0x00000000); /* CM_CLKSEL_WKUP */
- omap_writel(0x48008500, 0x000000cf); /* CM_CLKEN_PLL */
- omap_writel(0x48008530, 0x0000000c); /* CM_AUTOIDLE_PLL */
- omap_writel(0x48008540, /* CM_CLKSEL1_PLL */
- (0x78 << 12) | (6 << 8));
- omap_writel(0x48008544, 2); /* CM_CLKSEL2_PLL */
-
- /* GPMC setup */
- n800_gpmc_init(s);
-
- /* Video setup */
- n800_dss_init(&s->blizzard);
-
- /* CPU setup */
- s->mpu->cpu->env.GE = 0x5;
-
- /* If the machine has a slided keyboard, open it */
- if (s->kbd) {
- qemu_irq_raise(qdev_get_gpio_in(s->mpu->gpio, N810_SLIDE_GPIO));
- }
-}
-
-#define OMAP_TAG_NOKIA_BT 0x4e01
-#define OMAP_TAG_WLAN_CX3110X 0x4e02
-#define OMAP_TAG_CBUS 0x4e03
-#define OMAP_TAG_EM_ASIC_BB5 0x4e04
-
-static const struct omap_gpiosw_info_s {
- const char *name;
- int line;
- int type;
-} n800_gpiosw_info[] = {
- {
- "bat_cover", N800_BAT_COVER_GPIO,
- OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
- }, {
- "cam_act", N800_CAM_ACT_GPIO,
- OMAP_GPIOSW_TYPE_ACTIVITY,
- }, {
- "cam_turn", N800_CAM_TURN_GPIO,
- OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED,
- }, {
- "headphone", N8X0_HEADPHONE_GPIO,
- OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
- },
- { /* end of list */ }
-}, n810_gpiosw_info[] = {
- {
- "gps_reset", N810_GPS_RESET_GPIO,
- OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
- }, {
- "gps_wakeup", N810_GPS_WAKEUP_GPIO,
- OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_OUTPUT,
- }, {
- "headphone", N8X0_HEADPHONE_GPIO,
- OMAP_GPIOSW_TYPE_CONNECTION | OMAP_GPIOSW_INVERTED,
- }, {
- "kb_lock", N810_KB_LOCK_GPIO,
- OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
- }, {
- "sleepx_led", N810_SLEEPX_LED_GPIO,
- OMAP_GPIOSW_TYPE_ACTIVITY | OMAP_GPIOSW_INVERTED | OMAP_GPIOSW_OUTPUT,
- }, {
- "slide", N810_SLIDE_GPIO,
- OMAP_GPIOSW_TYPE_COVER | OMAP_GPIOSW_INVERTED,
- },
- { /* end of list */ }
-};
-
-static const struct omap_partition_info_s {
- uint32_t offset;
- uint32_t size;
- int mask;
- const char *name;
-} n800_part_info[] = {
- { 0x00000000, 0x00020000, 0x3, "bootloader" },
- { 0x00020000, 0x00060000, 0x0, "config" },
- { 0x00080000, 0x00200000, 0x0, "kernel" },
- { 0x00280000, 0x00200000, 0x3, "initfs" },
- { 0x00480000, 0x0fb80000, 0x3, "rootfs" },
- { /* end of list */ }
-}, n810_part_info[] = {
- { 0x00000000, 0x00020000, 0x3, "bootloader" },
- { 0x00020000, 0x00060000, 0x0, "config" },
- { 0x00080000, 0x00220000, 0x0, "kernel" },
- { 0x002a0000, 0x00400000, 0x0, "initfs" },
- { 0x006a0000, 0x0f960000, 0x0, "rootfs" },
- { /* end of list */ }
-};
-
-static const uint8_t n8x0_bd_addr[6] = { N8X0_BD_ADDR };
-
-static int n8x0_atag_setup(void *p, int model)
-{
- uint8_t *b;
- uint16_t *w;
- uint32_t *l;
- const struct omap_gpiosw_info_s *gpiosw;
- const struct omap_partition_info_s *partition;
- const char *tag;
-
- w = p;
-
- stw_p(w++, OMAP_TAG_UART); /* u16 tag */
- stw_p(w++, 4); /* u16 len */
- stw_p(w++, (1 << 2) | (1 << 1) | (1 << 0)); /* uint enabled_uarts */
- w++;
-
-#if 0
- stw_p(w++, OMAP_TAG_SERIAL_CONSOLE); /* u16 tag */
- stw_p(w++, 4); /* u16 len */
- stw_p(w++, XLDR_LL_UART + 1); /* u8 console_uart */
- stw_p(w++, 115200); /* u32 console_speed */
-#endif
-
- stw_p(w++, OMAP_TAG_LCD); /* u16 tag */
- stw_p(w++, 36); /* u16 len */
- strcpy((void *) w, "QEMU LCD panel"); /* char panel_name[16] */
- w += 8;
- strcpy((void *) w, "blizzard"); /* char ctrl_name[16] */
- w += 8;
- stw_p(w++, N810_BLIZZARD_RESET_GPIO); /* TODO: n800 s16 nreset_gpio */
- stw_p(w++, 24); /* u8 data_lines */
-
- stw_p(w++, OMAP_TAG_CBUS); /* u16 tag */
- stw_p(w++, 8); /* u16 len */
- stw_p(w++, N8X0_CBUS_CLK_GPIO); /* s16 clk_gpio */
- stw_p(w++, N8X0_CBUS_DAT_GPIO); /* s16 dat_gpio */
- stw_p(w++, N8X0_CBUS_SEL_GPIO); /* s16 sel_gpio */
- w++;
-
- stw_p(w++, OMAP_TAG_EM_ASIC_BB5); /* u16 tag */
- stw_p(w++, 4); /* u16 len */
- stw_p(w++, N8X0_RETU_GPIO); /* s16 retu_irq_gpio */
- stw_p(w++, N8X0_TAHVO_GPIO); /* s16 tahvo_irq_gpio */
-
- gpiosw = (model == 810) ? n810_gpiosw_info : n800_gpiosw_info;
- for (; gpiosw->name; gpiosw++) {
- stw_p(w++, OMAP_TAG_GPIO_SWITCH); /* u16 tag */
- stw_p(w++, 20); /* u16 len */
- strcpy((void *) w, gpiosw->name); /* char name[12] */
- w += 6;
- stw_p(w++, gpiosw->line); /* u16 gpio */
- stw_p(w++, gpiosw->type);
- stw_p(w++, 0);
- stw_p(w++, 0);
- }
-
- stw_p(w++, OMAP_TAG_NOKIA_BT); /* u16 tag */
- stw_p(w++, 12); /* u16 len */
- b = (void *) w;
- stb_p(b++, 0x01); /* u8 chip_type (CSR) */
- stb_p(b++, N8X0_BT_WKUP_GPIO); /* u8 bt_wakeup_gpio */
- stb_p(b++, N8X0_BT_HOST_WKUP_GPIO); /* u8 host_wakeup_gpio */
- stb_p(b++, N8X0_BT_RESET_GPIO); /* u8 reset_gpio */
- stb_p(b++, BT_UART + 1); /* u8 bt_uart */
- memcpy(b, &n8x0_bd_addr, 6); /* u8 bd_addr[6] */
- b += 6;
- stb_p(b++, 0x02); /* u8 bt_sysclk (38.4) */
- w = (void *) b;
-
- stw_p(w++, OMAP_TAG_WLAN_CX3110X); /* u16 tag */
- stw_p(w++, 8); /* u16 len */
- stw_p(w++, 0x25); /* u8 chip_type */
- stw_p(w++, N8X0_WLAN_PWR_GPIO); /* s16 power_gpio */
- stw_p(w++, N8X0_WLAN_IRQ_GPIO); /* s16 irq_gpio */
- stw_p(w++, -1); /* s16 spi_cs_gpio */
-
- stw_p(w++, OMAP_TAG_MMC); /* u16 tag */
- stw_p(w++, 16); /* u16 len */
- if (model == 810) {
- stw_p(w++, 0x23f); /* unsigned flags */
- stw_p(w++, -1); /* s16 power_pin */
- stw_p(w++, -1); /* s16 switch_pin */
- stw_p(w++, -1); /* s16 wp_pin */
- stw_p(w++, 0x240); /* unsigned flags */
- stw_p(w++, 0xc000); /* s16 power_pin */
- stw_p(w++, 0x0248); /* s16 switch_pin */
- stw_p(w++, 0xc000); /* s16 wp_pin */
- } else {
- stw_p(w++, 0xf); /* unsigned flags */
- stw_p(w++, -1); /* s16 power_pin */
- stw_p(w++, -1); /* s16 switch_pin */
- stw_p(w++, -1); /* s16 wp_pin */
- stw_p(w++, 0); /* unsigned flags */
- stw_p(w++, 0); /* s16 power_pin */
- stw_p(w++, 0); /* s16 switch_pin */
- stw_p(w++, 0); /* s16 wp_pin */
- }
-
- stw_p(w++, OMAP_TAG_TEA5761); /* u16 tag */
- stw_p(w++, 4); /* u16 len */
- stw_p(w++, N8X0_TEA5761_CS_GPIO); /* u16 enable_gpio */
- w++;
-
- partition = (model == 810) ? n810_part_info : n800_part_info;
- for (; partition->name; partition++) {
- stw_p(w++, OMAP_TAG_PARTITION); /* u16 tag */
- stw_p(w++, 28); /* u16 len */
- strcpy((void *) w, partition->name); /* char name[16] */
- l = (void *) (w + 8);
- stl_p(l++, partition->size); /* unsigned int size */
- stl_p(l++, partition->offset); /* unsigned int offset */
- stl_p(l++, partition->mask); /* unsigned int mask_flags */
- w = (void *) l;
- }
-
- stw_p(w++, OMAP_TAG_BOOT_REASON); /* u16 tag */
- stw_p(w++, 12); /* u16 len */
-#if 0
- strcpy((void *) w, "por"); /* char reason_str[12] */
- strcpy((void *) w, "charger"); /* char reason_str[12] */
- strcpy((void *) w, "32wd_to"); /* char reason_str[12] */
- strcpy((void *) w, "sw_rst"); /* char reason_str[12] */
- strcpy((void *) w, "mbus"); /* char reason_str[12] */
- strcpy((void *) w, "unknown"); /* char reason_str[12] */
- strcpy((void *) w, "swdg_to"); /* char reason_str[12] */
- strcpy((void *) w, "sec_vio"); /* char reason_str[12] */
- strcpy((void *) w, "pwr_key"); /* char reason_str[12] */
- strcpy((void *) w, "rtc_alarm"); /* char reason_str[12] */
-#else
- strcpy((void *) w, "pwr_key"); /* char reason_str[12] */
-#endif
- w += 6;
-
- tag = (model == 810) ? "RX-44" : "RX-34";
- stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
- stw_p(w++, 24); /* u16 len */
- strcpy((void *) w, "product"); /* char component[12] */
- w += 6;
- strcpy((void *) w, tag); /* char version[12] */
- w += 6;
-
- stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
- stw_p(w++, 24); /* u16 len */
- strcpy((void *) w, "hw-build"); /* char component[12] */
- w += 6;
- strcpy((void *) w, "QEMU ");
- pstrcat((void *) w, 12, qemu_hw_version()); /* char version[12] */
- w += 6;
-
- tag = (model == 810) ? "1.1.10-qemu" : "1.1.6-qemu";
- stw_p(w++, OMAP_TAG_VERSION_STR); /* u16 tag */
- stw_p(w++, 24); /* u16 len */
- strcpy((void *) w, "nolo"); /* char component[12] */
- w += 6;
- strcpy((void *) w, tag); /* char version[12] */
- w += 6;
-
- return (void *) w - p;
-}
-
-static int n800_atag_setup(const struct arm_boot_info *info, void *p)
-{
- return n8x0_atag_setup(p, 800);
-}
-
-static int n810_atag_setup(const struct arm_boot_info *info, void *p)
-{
- return n8x0_atag_setup(p, 810);
-}
-
-static void n8x0_init(MachineState *machine,
- struct arm_boot_info *binfo, int model)
-{
- struct n800_s *s = g_malloc0(sizeof(*s));
- MachineClass *mc = MACHINE_GET_CLASS(machine);
-
- if (machine->ram_size != mc->default_ram_size) {
- char *sz = size_to_str(mc->default_ram_size);
- error_report("Invalid RAM size, should be %s", sz);
- g_free(sz);
- exit(EXIT_FAILURE);
- }
- binfo->ram_size = machine->ram_size;
-
- memory_region_add_subregion(get_system_memory(), OMAP2_Q2_BASE,
- machine->ram);
-
- s->mpu = omap2420_mpu_init(machine->ram, machine->cpu_type);
-
- /* Setup peripherals
- *
- * Believed external peripherals layout in the N810:
- * (spi bus 1)
- * tsc2005
- * lcd_mipid
- * (spi bus 2)
- * Conexant cx3110x (WLAN)
- * optional: pc2400m (WiMAX)
- * (i2c bus 0)
- * TLV320AIC33 (audio codec)
- * TCM825x (camera by Toshiba)
- * lp5521 (clever LEDs)
- * tsl2563 (light sensor, hwmon, model 7, rev. 0)
- * lm8323 (keypad, manf 00, rev 04)
- * (i2c bus 1)
- * tmp105 (temperature sensor, hwmon)
- * menelaus (pm)
- * (somewhere on i2c - maybe N800-only)
- * tea5761 (FM tuner)
- * (serial 0)
- * GPS
- * (some serial port)
- * csr41814 (Bluetooth)
- */
- n8x0_gpio_setup(s);
- n8x0_nand_setup(s);
- n8x0_i2c_setup(s);
- if (model == 800) {
- n800_tsc_kbd_setup(s);
- } else if (model == 810) {
- n810_tsc_setup(s);
- n810_kbd_setup(s);
- }
- n8x0_spi_setup(s);
- n8x0_dss_setup(s);
- n8x0_cbus_setup(s);
- n8x0_usb_setup(s);
-
- if (machine->kernel_filename) {
- /* Or at the linux loader. */
- arm_load_kernel(s->mpu->cpu, machine, binfo);
-
- qemu_register_reset(n8x0_boot_init, s);
- }
-
- if (option_rom[0].name &&
- (machine->boot_config.order[0] == 'n' || !machine->kernel_filename)) {
- uint8_t *nolo_tags = g_new(uint8_t, 0x10000);
- /* No, wait, better start at the ROM. */
- s->mpu->cpu->env.regs[15] = OMAP2_Q2_BASE + 0x400000;
-
- /*
- * This is intended for loading the `secondary.bin' program from
- * Nokia images (the NOLO bootloader). The entry point seems
- * to be at OMAP2_Q2_BASE + 0x400000.
- *
- * The `2nd.bin' files contain some kind of earlier boot code and
- * for them the entry point needs to be set to OMAP2_SRAM_BASE.
- *
- * The code above is for loading the `zImage' file from Nokia
- * images.
- */
- if (load_image_targphys(option_rom[0].name,
- OMAP2_Q2_BASE + 0x400000,
- machine->ram_size - 0x400000) < 0) {
- error_report("Failed to load secondary bootloader %s",
- option_rom[0].name);
- exit(EXIT_FAILURE);
- }
-
- n800_setup_nolo_tags(nolo_tags);
- cpu_physical_memory_write(OMAP2_SRAM_BASE, nolo_tags, 0x10000);
- g_free(nolo_tags);
- }
-}
-
-static struct arm_boot_info n800_binfo = {
- .loader_start = OMAP2_Q2_BASE,
- .board_id = 0x4f7,
- .atag_board = n800_atag_setup,
-};
-
-static struct arm_boot_info n810_binfo = {
- .loader_start = OMAP2_Q2_BASE,
- /* 0x60c and 0x6bf (WiMAX Edition) have been assigned but are not
- * used by some older versions of the bootloader and 5555 is used
- * instead (including versions that shipped with many devices). */
- .board_id = 0x60c,
- .atag_board = n810_atag_setup,
-};
-
-static void n800_init(MachineState *machine)
-{
- n8x0_init(machine, &n800_binfo, 800);
-}
-
-static void n810_init(MachineState *machine)
-{
- n8x0_init(machine, &n810_binfo, 810);
-}
-
-static void n800_class_init(ObjectClass *oc, void *data)
-{
- MachineClass *mc = MACHINE_CLASS(oc);
-
- mc->desc = "Nokia N800 tablet aka. RX-34 (OMAP2420)";
- mc->init = n800_init;
- mc->default_boot_order = "";
- mc->ignore_memory_transaction_failures = true;
- mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2");
- /* Actually two chips of 0x4000000 bytes each */
- mc->default_ram_size = 0x08000000;
- mc->default_ram_id = "omap2.dram";
- mc->deprecation_reason = "machine is old and unmaintained";
-
- machine_add_audiodev_property(mc);
-}
-
-static const TypeInfo n800_type = {
- .name = MACHINE_TYPE_NAME("n800"),
- .parent = TYPE_MACHINE,
- .class_init = n800_class_init,
-};
-
-static void n810_class_init(ObjectClass *oc, void *data)
-{
- MachineClass *mc = MACHINE_CLASS(oc);
-
- mc->desc = "Nokia N810 tablet aka. RX-44 (OMAP2420)";
- mc->init = n810_init;
- mc->default_boot_order = "";
- mc->ignore_memory_transaction_failures = true;
- mc->default_cpu_type = ARM_CPU_TYPE_NAME("arm1136-r2");
- /* Actually two chips of 0x4000000 bytes each */
- mc->default_ram_size = 0x08000000;
- mc->default_ram_id = "omap2.dram";
- mc->deprecation_reason = "machine is old and unmaintained";
-
- machine_add_audiodev_property(mc);
-}
-
-static const TypeInfo n810_type = {
- .name = MACHINE_TYPE_NAME("n810"),
- .parent = TYPE_MACHINE,
- .class_init = n810_class_init,
-};
-
-static void nseries_machine_init(void)
-{
- type_register_static(&n800_type);
- type_register_static(&n810_type);
-}
-
-type_init(nseries_machine_init)
deleted file mode 100644
@@ -1,92 +0,0 @@
-/*
- * libqos driver framework
- *
- * Copyright (c) 2019 Red Hat, Inc.
- *
- * Author: Paolo Bonzini <pbonzini@redhat.com>
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License version 2.1 as published by the Free Software Foundation.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, see <http://www.gnu.org/licenses/>
- */
-
-#include "qemu/osdep.h"
-#include "../libqtest.h"
-#include "libqos-malloc.h"
-#include "qgraph.h"
-#include "i2c.h"
-
-#define ARM_PAGE_SIZE 4096
-#define N800_RAM_START 0x80000000
-#define N800_RAM_END 0x88000000
-
-typedef struct QN800Machine QN800Machine;
-
-struct QN800Machine {
- QOSGraphObject obj;
- QGuestAllocator alloc;
- OMAPI2C i2c_1;
-};
-
-static void *n800_get_driver(void *object, const char *interface)
-{
- QN800Machine *machine = object;
- if (!g_strcmp0(interface, "memory")) {
- return &machine->alloc;
- }
-
- fprintf(stderr, "%s not present in arm/n800\n", interface);
- g_assert_not_reached();
-}
-
-static QOSGraphObject *n800_get_device(void *obj, const char *device)
-{
- QN800Machine *machine = obj;
- if (!g_strcmp0(device, "omap_i2c")) {
- return &machine->i2c_1.obj;
- }
-
- fprintf(stderr, "%s not present in arm/n800\n", device);
- g_assert_not_reached();
-}
-
-static void n800_destructor(QOSGraphObject *obj)
-{
- QN800Machine *machine = (QN800Machine *) obj;
- alloc_destroy(&machine->alloc);
-}
-
-static void *qos_create_machine_arm_n800(QTestState *qts)
-{
- QN800Machine *machine = g_new0(QN800Machine, 1);
-
- alloc_init(&machine->alloc, 0,
- N800_RAM_START,
- N800_RAM_END,
- ARM_PAGE_SIZE);
- machine->obj.get_device = n800_get_device;
- machine->obj.get_driver = n800_get_driver;
- machine->obj.destructor = n800_destructor;
-
- omap_i2c_init(&machine->i2c_1, qts, 0x48070000);
- return &machine->obj;
-}
-
-static void n800_register_nodes(void)
-{
- QOSGraphEdgeOptions edge = {
- .extra_device_opts = "bus=i2c-bus.0"
- };
- qos_node_create_machine("arm/n800", qos_create_machine_arm_n800);
- qos_node_contains("arm/n800", "omap_i2c", &edge, NULL);
-}
-
-libqos_init(n800_register_nodes);
@@ -12,7 +12,6 @@ arm_ss.add(when: 'CONFIG_MUSICPAL', if_true: files('musicpal.c'))
arm_ss.add(when: 'CONFIG_NETDUINOPLUS2', if_true: files('netduinoplus2.c'))
arm_ss.add(when: 'CONFIG_OLIMEX_STM32_H405', if_true: files('olimex-stm32-h405.c'))
arm_ss.add(when: 'CONFIG_NPCM7XX', if_true: files('npcm7xx.c', 'npcm7xx_boards.c'))
-arm_ss.add(when: 'CONFIG_NSERIES', if_true: files('nseries.c'))
arm_ss.add(when: 'CONFIG_REALVIEW', if_true: files('realview.c'))
arm_ss.add(when: 'CONFIG_SBSA_REF', if_true: files('sbsa-ref.c'))
arm_ss.add(when: 'CONFIG_STELLARIS', if_true: files('stellaris.c'))
deleted file mode 100755
@@ -1,49 +0,0 @@
-# Functional test that boots a Linux kernel and checks the console
-#
-# Copyright (c) 2020 Red Hat, Inc.
-#
-# Author:
-# Thomas Huth <thuth@redhat.com>
-#
-# This work is licensed under the terms of the GNU GPL, version 2 or
-# later. See the COPYING file in the top-level directory.
-
-import os
-
-from avocado import skipUnless
-from avocado_qemu import QemuSystemTest
-from avocado_qemu import wait_for_console_pattern
-
-class N8x0Machine(QemuSystemTest):
- """Boots the Linux kernel and checks that the console is operational"""
-
- timeout = 90
-
- def __do_test_n8x0(self):
- kernel_url = ('http://stskeeps.subnetmask.net/meego-n8x0/'
- 'meego-arm-n8x0-1.0.80.20100712.1431-'
- 'vmlinuz-2.6.35~rc4-129.1-n8x0')
- kernel_hash = 'e9d5ab8d7548923a0061b6fbf601465e479ed269'
- kernel_path = self.fetch_asset(kernel_url, asset_hash=kernel_hash)
-
- self.vm.set_console(console_index=1)
- self.vm.add_args('-kernel', kernel_path,
- '-append', 'printk.time=0 console=ttyS1')
- self.vm.launch()
- wait_for_console_pattern(self, 'TSC2005 driver initializing')
-
- @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
- def test_n800(self):
- """
- :avocado: tags=arch:arm
- :avocado: tags=machine:n800
- """
- self.__do_test_n8x0()
-
- @skipUnless(os.getenv('AVOCADO_ALLOW_UNTRUSTED_CODE'), 'untrusted code')
- def test_n810(self):
- """
- :avocado: tags=arch:arm
- :avocado: tags=machine:n810
- """
- self.__do_test_n8x0()
@@ -52,7 +52,6 @@ libqos_srcs = files(
# qgraph machines:
'aarch64-xlnx-zcu102-machine.c',
'arm-imx25-pdk-machine.c',
- 'arm-n800-machine.c',
'arm-raspi2-machine.c',
'arm-sabrelite-machine.c',
'arm-smdkc210-machine.c',