From patchwork Tue Oct 1 16:39:01 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Peter Maydell X-Patchwork-Id: 13818520 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from lists.gnu.org (lists.gnu.org [209.51.188.17]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id 0C578CEACE7 for ; Tue, 1 Oct 2024 16:44:49 +0000 (UTC) Received: from localhost ([::1] helo=lists1p.gnu.org) by lists.gnu.org with esmtp (Exim 4.90_1) (envelope-from ) id 1svfwD-0001SU-Nh; Tue, 01 Oct 2024 12:41:25 -0400 Received: from eggs.gnu.org ([2001:470:142:3::10]) by lists.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.90_1) (envelope-from ) id 1svfuh-0005bs-5I for qemu-devel@nongnu.org; Tue, 01 Oct 2024 12:39:52 -0400 Received: from mail-wr1-x42b.google.com ([2a00:1450:4864:20::42b]) by eggs.gnu.org with esmtps (TLS1.2:ECDHE_RSA_AES_128_GCM_SHA256:128) (Exim 4.90_1) (envelope-from ) id 1svfuY-000684-BL for qemu-devel@nongnu.org; Tue, 01 Oct 2024 12:39:50 -0400 Received: by mail-wr1-x42b.google.com with SMTP id ffacd0b85a97d-37cd831ab06so2261756f8f.0 for ; Tue, 01 Oct 2024 09:39:41 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1727800781; x=1728405581; darn=nongnu.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:from:to:cc:subject:date:message-id :reply-to; bh=94RVQpuK9voVWfsQM4YutnLzLF8FHptQjDrqDBSiE/Q=; b=SpqxQBoZS+2YStqCVEhS2LA1E7U+d8T8+tPe7bPcchioMfVHdu6RkbR0VH4sg4pnv7 W4pKVuZE6dofAcnJXOAhBfQ3yRAyJ3GGsQdLuA0b+IAfi2dKKAmzDTZrzGPHATD6aMW/ 2eQ7sRcabxacOAxC7wy6V6VklmhyRFOWgt6F71kyvARFWbtLHYezgs7AGvZUWhPpZrxI 6P9HQiMYi5mrNMOHURW204N6yr7SFtgo5RyH5enFU7G2izOAcqcb5TuIMsMNVvY7RvfB nvHehqAFxw9bDex4V3FTHHd1249qyhmK6xAMufZI6mLjflpT7UxGqvInYBV40wAAgLMF FoIw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1727800781; x=1728405581; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:to:from:x-gm-message-state:from:to:cc :subject:date:message-id:reply-to; bh=94RVQpuK9voVWfsQM4YutnLzLF8FHptQjDrqDBSiE/Q=; b=i3z0glKfPhkhHVPKPRc7058y2aGlN0E1s0F0bQz19gXVWMmtAr+AupAxxZAT9tJfWv CpynjcWAjcAIU8K+2bUs2839CvRoYZYsegfsiSuB6O9WuMWAb+XT8YiQ7UzvsTNlZPJu 2q/E9za8et3eL2iC+bTrhiVmdSF1awwX3zneGpvajdNkgh2vwvvtchGwOfkHF3op6Xmh fuwXeyMqtfjM4oHtdV7SSqwHH3bLbRjuZwlNJa+e9MhxIhsBiqs2/KPKS9yqgXocf/rc TzbORcGAbbVXnXyiwK74ju+hvuqkjUTxvuNx3sHT5XX/rfAT5epJy2f0DexbOMSBn89+ Xh6A== X-Gm-Message-State: AOJu0YzGqakHiMsx0rc6tn9Nprh+ejYYDcz7rdWBaxnTCFk690VNyNnb H+WS8FMYoNtl/2yPHN3zhRocj7/OkiRXWtNOvVuzdXEUsjo5E0r5aIB289DGPTgP2YypyW4Mozv 1 X-Google-Smtp-Source: AGHT+IGImZ1JcwxbtbpTehWCamnVv2IptVy7b5/FKtbMFE1WHpuYEO0FoFjrxqyGTuvxJQIg4HrK0g== X-Received: by 2002:adf:b31b:0:b0:37c:cfe4:6997 with SMTP id ffacd0b85a97d-37cfb9f9cf5mr112956f8f.47.1727800780521; Tue, 01 Oct 2024 09:39:40 -0700 (PDT) Received: from orth.archaic.org.uk (orth.archaic.org.uk. [2001:8b0:1d0::2]) by smtp.gmail.com with ESMTPSA id ffacd0b85a97d-37cd56e6547sm12243771f8f.58.2024.10.01.09.39.39 for (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 01 Oct 2024 09:39:39 -0700 (PDT) From: Peter Maydell To: qemu-devel@nongnu.org Subject: [PULL 37/54] hw/usb: Remove MUSB USB host controller Date: Tue, 1 Oct 2024 17:39:01 +0100 Message-Id: <20241001163918.1275441-38-peter.maydell@linaro.org> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20241001163918.1275441-1-peter.maydell@linaro.org> References: <20241001163918.1275441-1-peter.maydell@linaro.org> MIME-Version: 1.0 Received-SPF: pass client-ip=2a00:1450:4864:20::42b; envelope-from=peter.maydell@linaro.org; helo=mail-wr1-x42b.google.com X-Spam_score_int: -20 X-Spam_score: -2.1 X-Spam_bar: -- X-Spam_report: (-2.1 / 5.0 requ) BAYES_00=-1.9, DKIM_SIGNED=0.1, DKIM_VALID=-0.1, DKIM_VALID_AU=-0.1, DKIM_VALID_EF=-0.1, RCVD_IN_DNSWL_NONE=-0.0001, SPF_HELO_NONE=0.001, SPF_PASS=-0.001 autolearn=ham autolearn_force=no X-Spam_action: no action X-BeenThere: qemu-devel@nongnu.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: qemu-devel-bounces+qemu-devel=archiver.kernel.org@nongnu.org Sender: qemu-devel-bounces+qemu-devel=archiver.kernel.org@nongnu.org Remove the MUSB USB2.0 OTG-compliant USB host controller device model. This was only used by the tusb6010 USB controller in the n800/n810 machines. Signed-off-by: Peter Maydell Reviewed-by: Thomas Huth Message-id: 20240903160751.4100218-35-peter.maydell@linaro.org --- include/hw/usb/hcd-musb.h | 49 -- hw/usb/hcd-musb.c | 1553 ------------------------------------- hw/usb/Kconfig | 4 - hw/usb/meson.build | 1 - 4 files changed, 1607 deletions(-) delete mode 100644 include/hw/usb/hcd-musb.h delete mode 100644 hw/usb/hcd-musb.c diff --git a/include/hw/usb/hcd-musb.h b/include/hw/usb/hcd-musb.h deleted file mode 100644 index 4d4b1ec0fc2..00000000000 --- a/include/hw/usb/hcd-musb.h +++ /dev/null @@ -1,49 +0,0 @@ -/* - * "Inventra" High-speed Dual-Role Controller (MUSB-HDRC), Mentor Graphics, - * USB2.0 OTG compliant core used in various chips. - * - * Only host-mode and non-DMA accesses are currently supported. - * - * Copyright (C) 2008 Nokia Corporation - * Written by Andrzej Zaborowski - * - * SPDX-License-Identifier: GPL-2.0-or-later - */ - -#ifndef HW_USB_HCD_MUSB_H -#define HW_USB_HCD_MUSB_H - -#include "exec/hwaddr.h" - -enum musb_irq_source_e { - musb_irq_suspend = 0, - musb_irq_resume, - musb_irq_rst_babble, - musb_irq_sof, - musb_irq_connect, - musb_irq_disconnect, - musb_irq_vbus_request, - musb_irq_vbus_error, - musb_irq_rx, - musb_irq_tx, - musb_set_vbus, - musb_set_session, - /* Add new interrupts here */ - musb_irq_max /* total number of interrupts defined */ -}; - -/* TODO convert hcd-musb to QOM/qdev and remove MUSBReadFunc/MUSBWriteFunc */ -typedef void MUSBWriteFunc(void *opaque, hwaddr addr, uint32_t value); -typedef uint32_t MUSBReadFunc(void *opaque, hwaddr addr); -extern MUSBReadFunc * const musb_read[]; -extern MUSBWriteFunc * const musb_write[]; - -typedef struct MUSBState MUSBState; - -MUSBState *musb_init(DeviceState *parent_device, int gpio_base); -void musb_reset(MUSBState *s); -uint32_t musb_core_intr_get(MUSBState *s); -void musb_core_intr_clear(MUSBState *s, uint32_t mask); -void musb_set_size(MUSBState *s, int epnum, int size, int is_tx); - -#endif diff --git a/hw/usb/hcd-musb.c b/hw/usb/hcd-musb.c deleted file mode 100644 index 6dca373cb1f..00000000000 --- a/hw/usb/hcd-musb.c +++ /dev/null @@ -1,1553 +0,0 @@ -/* - * "Inventra" High-speed Dual-Role Controller (MUSB-HDRC), Mentor Graphics, - * USB2.0 OTG compliant core used in various chips. - * - * Copyright (C) 2008 Nokia Corporation - * Written by Andrzej Zaborowski - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 or - * (at your option) version 3 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, see . - * - * Only host-mode and non-DMA accesses are currently supported. - */ -#include "qemu/osdep.h" -#include "qemu/timer.h" -#include "hw/usb.h" -#include "hw/usb/hcd-musb.h" -#include "hw/irq.h" -#include "hw/hw.h" - -/* Common USB registers */ -#define MUSB_HDRC_FADDR 0x00 /* 8-bit */ -#define MUSB_HDRC_POWER 0x01 /* 8-bit */ - -#define MUSB_HDRC_INTRTX 0x02 /* 16-bit */ -#define MUSB_HDRC_INTRRX 0x04 -#define MUSB_HDRC_INTRTXE 0x06 -#define MUSB_HDRC_INTRRXE 0x08 -#define MUSB_HDRC_INTRUSB 0x0a /* 8 bit */ -#define MUSB_HDRC_INTRUSBE 0x0b /* 8 bit */ -#define MUSB_HDRC_FRAME 0x0c /* 16-bit */ -#define MUSB_HDRC_INDEX 0x0e /* 8 bit */ -#define MUSB_HDRC_TESTMODE 0x0f /* 8 bit */ - -/* Per-EP registers in indexed mode */ -#define MUSB_HDRC_EP_IDX 0x10 /* 8-bit */ - -/* EP FIFOs */ -#define MUSB_HDRC_FIFO 0x20 - -/* Additional Control Registers */ -#define MUSB_HDRC_DEVCTL 0x60 /* 8 bit */ - -/* These are indexed */ -#define MUSB_HDRC_TXFIFOSZ 0x62 /* 8 bit (see masks) */ -#define MUSB_HDRC_RXFIFOSZ 0x63 /* 8 bit (see masks) */ -#define MUSB_HDRC_TXFIFOADDR 0x64 /* 16 bit offset shifted right 3 */ -#define MUSB_HDRC_RXFIFOADDR 0x66 /* 16 bit offset shifted right 3 */ - -/* Some more registers */ -#define MUSB_HDRC_VCTRL 0x68 /* 8 bit */ -#define MUSB_HDRC_HWVERS 0x6c /* 8 bit */ - -/* Added in HDRC 1.9(?) & MHDRC 1.4 */ -/* ULPI pass-through */ -#define MUSB_HDRC_ULPI_VBUSCTL 0x70 -#define MUSB_HDRC_ULPI_REGDATA 0x74 -#define MUSB_HDRC_ULPI_REGADDR 0x75 -#define MUSB_HDRC_ULPI_REGCTL 0x76 - -/* Extended config & PHY control */ -#define MUSB_HDRC_ENDCOUNT 0x78 /* 8 bit */ -#define MUSB_HDRC_DMARAMCFG 0x79 /* 8 bit */ -#define MUSB_HDRC_PHYWAIT 0x7a /* 8 bit */ -#define MUSB_HDRC_PHYVPLEN 0x7b /* 8 bit */ -#define MUSB_HDRC_HS_EOF1 0x7c /* 8 bit, units of 546.1 us */ -#define MUSB_HDRC_FS_EOF1 0x7d /* 8 bit, units of 533.3 ns */ -#define MUSB_HDRC_LS_EOF1 0x7e /* 8 bit, units of 1.067 us */ - -/* Per-EP BUSCTL registers */ -#define MUSB_HDRC_BUSCTL 0x80 - -/* Per-EP registers in flat mode */ -#define MUSB_HDRC_EP 0x100 - -/* offsets to registers in flat model */ -#define MUSB_HDRC_TXMAXP 0x00 /* 16 bit apparently */ -#define MUSB_HDRC_TXCSR 0x02 /* 16 bit apparently */ -#define MUSB_HDRC_CSR0 MUSB_HDRC_TXCSR /* re-used for EP0 */ -#define MUSB_HDRC_RXMAXP 0x04 /* 16 bit apparently */ -#define MUSB_HDRC_RXCSR 0x06 /* 16 bit apparently */ -#define MUSB_HDRC_RXCOUNT 0x08 /* 16 bit apparently */ -#define MUSB_HDRC_COUNT0 MUSB_HDRC_RXCOUNT /* re-used for EP0 */ -#define MUSB_HDRC_TXTYPE 0x0a /* 8 bit apparently */ -#define MUSB_HDRC_TYPE0 MUSB_HDRC_TXTYPE /* re-used for EP0 */ -#define MUSB_HDRC_TXINTERVAL 0x0b /* 8 bit apparently */ -#define MUSB_HDRC_NAKLIMIT0 MUSB_HDRC_TXINTERVAL /* re-used for EP0 */ -#define MUSB_HDRC_RXTYPE 0x0c /* 8 bit apparently */ -#define MUSB_HDRC_RXINTERVAL 0x0d /* 8 bit apparently */ -#define MUSB_HDRC_FIFOSIZE 0x0f /* 8 bit apparently */ -#define MUSB_HDRC_CONFIGDATA MGC_O_HDRC_FIFOSIZE /* re-used for EP0 */ - -/* "Bus control" registers */ -#define MUSB_HDRC_TXFUNCADDR 0x00 -#define MUSB_HDRC_TXHUBADDR 0x02 -#define MUSB_HDRC_TXHUBPORT 0x03 - -#define MUSB_HDRC_RXFUNCADDR 0x04 -#define MUSB_HDRC_RXHUBADDR 0x06 -#define MUSB_HDRC_RXHUBPORT 0x07 - -/* - * MUSBHDRC Register bit masks - */ - -/* POWER */ -#define MGC_M_POWER_ISOUPDATE 0x80 -#define MGC_M_POWER_SOFTCONN 0x40 -#define MGC_M_POWER_HSENAB 0x20 -#define MGC_M_POWER_HSMODE 0x10 -#define MGC_M_POWER_RESET 0x08 -#define MGC_M_POWER_RESUME 0x04 -#define MGC_M_POWER_SUSPENDM 0x02 -#define MGC_M_POWER_ENSUSPEND 0x01 - -/* INTRUSB */ -#define MGC_M_INTR_SUSPEND 0x01 -#define MGC_M_INTR_RESUME 0x02 -#define MGC_M_INTR_RESET 0x04 -#define MGC_M_INTR_BABBLE 0x04 -#define MGC_M_INTR_SOF 0x08 -#define MGC_M_INTR_CONNECT 0x10 -#define MGC_M_INTR_DISCONNECT 0x20 -#define MGC_M_INTR_SESSREQ 0x40 -#define MGC_M_INTR_VBUSERROR 0x80 /* FOR SESSION END */ -#define MGC_M_INTR_EP0 0x01 /* FOR EP0 INTERRUPT */ - -/* DEVCTL */ -#define MGC_M_DEVCTL_BDEVICE 0x80 -#define MGC_M_DEVCTL_FSDEV 0x40 -#define MGC_M_DEVCTL_LSDEV 0x20 -#define MGC_M_DEVCTL_VBUS 0x18 -#define MGC_S_DEVCTL_VBUS 3 -#define MGC_M_DEVCTL_HM 0x04 -#define MGC_M_DEVCTL_HR 0x02 -#define MGC_M_DEVCTL_SESSION 0x01 - -/* TESTMODE */ -#define MGC_M_TEST_FORCE_HOST 0x80 -#define MGC_M_TEST_FIFO_ACCESS 0x40 -#define MGC_M_TEST_FORCE_FS 0x20 -#define MGC_M_TEST_FORCE_HS 0x10 -#define MGC_M_TEST_PACKET 0x08 -#define MGC_M_TEST_K 0x04 -#define MGC_M_TEST_J 0x02 -#define MGC_M_TEST_SE0_NAK 0x01 - -/* CSR0 */ -#define MGC_M_CSR0_FLUSHFIFO 0x0100 -#define MGC_M_CSR0_TXPKTRDY 0x0002 -#define MGC_M_CSR0_RXPKTRDY 0x0001 - -/* CSR0 in Peripheral mode */ -#define MGC_M_CSR0_P_SVDSETUPEND 0x0080 -#define MGC_M_CSR0_P_SVDRXPKTRDY 0x0040 -#define MGC_M_CSR0_P_SENDSTALL 0x0020 -#define MGC_M_CSR0_P_SETUPEND 0x0010 -#define MGC_M_CSR0_P_DATAEND 0x0008 -#define MGC_M_CSR0_P_SENTSTALL 0x0004 - -/* CSR0 in Host mode */ -#define MGC_M_CSR0_H_NO_PING 0x0800 -#define MGC_M_CSR0_H_WR_DATATOGGLE 0x0400 /* set to allow setting: */ -#define MGC_M_CSR0_H_DATATOGGLE 0x0200 /* data toggle control */ -#define MGC_M_CSR0_H_NAKTIMEOUT 0x0080 -#define MGC_M_CSR0_H_STATUSPKT 0x0040 -#define MGC_M_CSR0_H_REQPKT 0x0020 -#define MGC_M_CSR0_H_ERROR 0x0010 -#define MGC_M_CSR0_H_SETUPPKT 0x0008 -#define MGC_M_CSR0_H_RXSTALL 0x0004 - -/* CONFIGDATA */ -#define MGC_M_CONFIGDATA_MPRXE 0x80 /* auto bulk pkt combining */ -#define MGC_M_CONFIGDATA_MPTXE 0x40 /* auto bulk pkt splitting */ -#define MGC_M_CONFIGDATA_BIGENDIAN 0x20 -#define MGC_M_CONFIGDATA_HBRXE 0x10 /* HB-ISO for RX */ -#define MGC_M_CONFIGDATA_HBTXE 0x08 /* HB-ISO for TX */ -#define MGC_M_CONFIGDATA_DYNFIFO 0x04 /* dynamic FIFO sizing */ -#define MGC_M_CONFIGDATA_SOFTCONE 0x02 /* SoftConnect */ -#define MGC_M_CONFIGDATA_UTMIDW 0x01 /* Width, 0 => 8b, 1 => 16b */ - -/* TXCSR in Peripheral and Host mode */ -#define MGC_M_TXCSR_AUTOSET 0x8000 -#define MGC_M_TXCSR_ISO 0x4000 -#define MGC_M_TXCSR_MODE 0x2000 -#define MGC_M_TXCSR_DMAENAB 0x1000 -#define MGC_M_TXCSR_FRCDATATOG 0x0800 -#define MGC_M_TXCSR_DMAMODE 0x0400 -#define MGC_M_TXCSR_CLRDATATOG 0x0040 -#define MGC_M_TXCSR_FLUSHFIFO 0x0008 -#define MGC_M_TXCSR_FIFONOTEMPTY 0x0002 -#define MGC_M_TXCSR_TXPKTRDY 0x0001 - -/* TXCSR in Peripheral mode */ -#define MGC_M_TXCSR_P_INCOMPTX 0x0080 -#define MGC_M_TXCSR_P_SENTSTALL 0x0020 -#define MGC_M_TXCSR_P_SENDSTALL 0x0010 -#define MGC_M_TXCSR_P_UNDERRUN 0x0004 - -/* TXCSR in Host mode */ -#define MGC_M_TXCSR_H_WR_DATATOGGLE 0x0200 -#define MGC_M_TXCSR_H_DATATOGGLE 0x0100 -#define MGC_M_TXCSR_H_NAKTIMEOUT 0x0080 -#define MGC_M_TXCSR_H_RXSTALL 0x0020 -#define MGC_M_TXCSR_H_ERROR 0x0004 - -/* RXCSR in Peripheral and Host mode */ -#define MGC_M_RXCSR_AUTOCLEAR 0x8000 -#define MGC_M_RXCSR_DMAENAB 0x2000 -#define MGC_M_RXCSR_DISNYET 0x1000 -#define MGC_M_RXCSR_DMAMODE 0x0800 -#define MGC_M_RXCSR_INCOMPRX 0x0100 -#define MGC_M_RXCSR_CLRDATATOG 0x0080 -#define MGC_M_RXCSR_FLUSHFIFO 0x0010 -#define MGC_M_RXCSR_DATAERROR 0x0008 -#define MGC_M_RXCSR_FIFOFULL 0x0002 -#define MGC_M_RXCSR_RXPKTRDY 0x0001 - -/* RXCSR in Peripheral mode */ -#define MGC_M_RXCSR_P_ISO 0x4000 -#define MGC_M_RXCSR_P_SENTSTALL 0x0040 -#define MGC_M_RXCSR_P_SENDSTALL 0x0020 -#define MGC_M_RXCSR_P_OVERRUN 0x0004 - -/* RXCSR in Host mode */ -#define MGC_M_RXCSR_H_AUTOREQ 0x4000 -#define MGC_M_RXCSR_H_WR_DATATOGGLE 0x0400 -#define MGC_M_RXCSR_H_DATATOGGLE 0x0200 -#define MGC_M_RXCSR_H_RXSTALL 0x0040 -#define MGC_M_RXCSR_H_REQPKT 0x0020 -#define MGC_M_RXCSR_H_ERROR 0x0004 - -/* HUBADDR */ -#define MGC_M_HUBADDR_MULTI_TT 0x80 - -/* ULPI: Added in HDRC 1.9(?) & MHDRC 1.4 */ -#define MGC_M_ULPI_VBCTL_USEEXTVBUSIND 0x02 -#define MGC_M_ULPI_VBCTL_USEEXTVBUS 0x01 -#define MGC_M_ULPI_REGCTL_INT_ENABLE 0x08 -#define MGC_M_ULPI_REGCTL_READNOTWRITE 0x04 -#define MGC_M_ULPI_REGCTL_COMPLETE 0x02 -#define MGC_M_ULPI_REGCTL_REG 0x01 - -/* #define MUSB_DEBUG */ - -#ifdef MUSB_DEBUG -#define TRACE(fmt, ...) fprintf(stderr, "%s@%d: " fmt "\n", __func__, \ - __LINE__, ##__VA_ARGS__) -#else -#define TRACE(...) -#endif - - -static void musb_attach(USBPort *port); -static void musb_detach(USBPort *port); -static void musb_child_detach(USBPort *port, USBDevice *child); -static void musb_schedule_cb(USBPort *port, USBPacket *p); -static void musb_async_cancel_device(MUSBState *s, USBDevice *dev); - -static USBPortOps musb_port_ops = { - .attach = musb_attach, - .detach = musb_detach, - .child_detach = musb_child_detach, - .complete = musb_schedule_cb, -}; - -static USBBusOps musb_bus_ops = { -}; - -typedef struct MUSBPacket MUSBPacket; -typedef struct MUSBEndPoint MUSBEndPoint; - -struct MUSBPacket { - USBPacket p; - MUSBEndPoint *ep; - int dir; -}; - -struct MUSBEndPoint { - uint16_t faddr[2]; - uint8_t haddr[2]; - uint8_t hport[2]; - uint16_t csr[2]; - uint16_t maxp[2]; - uint16_t rxcount; - uint8_t type[2]; - uint8_t interval[2]; - uint8_t config; - uint8_t fifosize; - int timeout[2]; /* Always in microframes */ - - uint8_t *buf[2]; - int fifolen[2]; - int fifostart[2]; - int fifoaddr[2]; - MUSBPacket packey[2]; - int status[2]; - int ext_size[2]; - - /* For callbacks' use */ - int epnum; - int interrupt[2]; - MUSBState *musb; - USBCallback *delayed_cb[2]; - QEMUTimer *intv_timer[2]; -}; - -struct MUSBState { - qemu_irq irqs[musb_irq_max]; - USBBus bus; - USBPort port; - - int idx; - uint8_t devctl; - uint8_t power; - uint8_t faddr; - - uint8_t intr; - uint8_t mask; - uint16_t tx_intr; - uint16_t tx_mask; - uint16_t rx_intr; - uint16_t rx_mask; - - int setup_len; - int session; - - uint8_t buf[0x8000]; - - /* Duplicating the world since 2008!... probably we should have 32 - * logical, single endpoints instead. */ - MUSBEndPoint ep[16]; -}; - -void musb_reset(MUSBState *s) -{ - int i; - - s->faddr = 0x00; - s->devctl = 0; - s->power = MGC_M_POWER_HSENAB; - s->tx_intr = 0x0000; - s->rx_intr = 0x0000; - s->tx_mask = 0xffff; - s->rx_mask = 0xffff; - s->intr = 0x00; - s->mask = 0x06; - s->idx = 0; - - s->setup_len = 0; - s->session = 0; - memset(s->buf, 0, sizeof(s->buf)); - - /* TODO: _DW */ - s->ep[0].config = MGC_M_CONFIGDATA_SOFTCONE | MGC_M_CONFIGDATA_DYNFIFO; - for (i = 0; i < 16; i ++) { - s->ep[i].fifosize = 64; - s->ep[i].maxp[0] = 0x40; - s->ep[i].maxp[1] = 0x40; - s->ep[i].musb = s; - s->ep[i].epnum = i; - usb_packet_init(&s->ep[i].packey[0].p); - usb_packet_init(&s->ep[i].packey[1].p); - } -} - -struct MUSBState *musb_init(DeviceState *parent_device, int gpio_base) -{ - MUSBState *s = g_malloc0(sizeof(*s)); - int i; - - for (i = 0; i < musb_irq_max; i++) { - s->irqs[i] = qdev_get_gpio_in(parent_device, gpio_base + i); - } - - musb_reset(s); - - usb_bus_new(&s->bus, sizeof(s->bus), &musb_bus_ops, parent_device); - usb_register_port(&s->bus, &s->port, s, 0, &musb_port_ops, - USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); - - return s; -} - -static void musb_vbus_set(MUSBState *s, int level) -{ - if (level) - s->devctl |= 3 << MGC_S_DEVCTL_VBUS; - else - s->devctl &= ~MGC_M_DEVCTL_VBUS; - - qemu_set_irq(s->irqs[musb_set_vbus], level); -} - -static void musb_intr_set(MUSBState *s, int line, int level) -{ - if (!level) { - s->intr &= ~(1 << line); - qemu_irq_lower(s->irqs[line]); - } else if (s->mask & (1 << line)) { - s->intr |= 1 << line; - qemu_irq_raise(s->irqs[line]); - } -} - -static void musb_tx_intr_set(MUSBState *s, int line, int level) -{ - if (!level) { - s->tx_intr &= ~(1 << line); - if (!s->tx_intr) - qemu_irq_lower(s->irqs[musb_irq_tx]); - } else if (s->tx_mask & (1 << line)) { - s->tx_intr |= 1 << line; - qemu_irq_raise(s->irqs[musb_irq_tx]); - } -} - -static void musb_rx_intr_set(MUSBState *s, int line, int level) -{ - if (line) { - if (!level) { - s->rx_intr &= ~(1 << line); - if (!s->rx_intr) - qemu_irq_lower(s->irqs[musb_irq_rx]); - } else if (s->rx_mask & (1 << line)) { - s->rx_intr |= 1 << line; - qemu_irq_raise(s->irqs[musb_irq_rx]); - } - } else - musb_tx_intr_set(s, line, level); -} - -uint32_t musb_core_intr_get(MUSBState *s) -{ - return (s->rx_intr << 15) | s->tx_intr; -} - -void musb_core_intr_clear(MUSBState *s, uint32_t mask) -{ - if (s->rx_intr) { - s->rx_intr &= mask >> 15; - if (!s->rx_intr) - qemu_irq_lower(s->irqs[musb_irq_rx]); - } - - if (s->tx_intr) { - s->tx_intr &= mask & 0xffff; - if (!s->tx_intr) - qemu_irq_lower(s->irqs[musb_irq_tx]); - } -} - -void musb_set_size(MUSBState *s, int epnum, int size, int is_tx) -{ - s->ep[epnum].ext_size[!is_tx] = size; - s->ep[epnum].fifostart[0] = 0; - s->ep[epnum].fifostart[1] = 0; - s->ep[epnum].fifolen[0] = 0; - s->ep[epnum].fifolen[1] = 0; -} - -static void musb_session_update(MUSBState *s, int prev_dev, int prev_sess) -{ - int detect_prev = prev_dev && prev_sess; - int detect = !!s->port.dev && s->session; - - if (detect && !detect_prev) { - /* Let's skip the ID pin sense and VBUS sense formalities and - * and signal a successful SRP directly. This should work at least - * for the Linux driver stack. */ - musb_intr_set(s, musb_irq_connect, 1); - - if (s->port.dev->speed == USB_SPEED_LOW) { - s->devctl &= ~MGC_M_DEVCTL_FSDEV; - s->devctl |= MGC_M_DEVCTL_LSDEV; - } else { - s->devctl |= MGC_M_DEVCTL_FSDEV; - s->devctl &= ~MGC_M_DEVCTL_LSDEV; - } - - /* A-mode? */ - s->devctl &= ~MGC_M_DEVCTL_BDEVICE; - - /* Host-mode bit? */ - s->devctl |= MGC_M_DEVCTL_HM; -#if 1 - musb_vbus_set(s, 1); -#endif - } else if (!detect && detect_prev) { -#if 1 - musb_vbus_set(s, 0); -#endif - } -} - -/* Attach or detach a device on our only port. */ -static void musb_attach(USBPort *port) -{ - MUSBState *s = (MUSBState *) port->opaque; - - musb_intr_set(s, musb_irq_vbus_request, 1); - musb_session_update(s, 0, s->session); -} - -static void musb_detach(USBPort *port) -{ - MUSBState *s = (MUSBState *) port->opaque; - - musb_async_cancel_device(s, port->dev); - - musb_intr_set(s, musb_irq_disconnect, 1); - musb_session_update(s, 1, s->session); -} - -static void musb_child_detach(USBPort *port, USBDevice *child) -{ - MUSBState *s = (MUSBState *) port->opaque; - - musb_async_cancel_device(s, child); -} - -static void musb_cb_tick0(void *opaque) -{ - MUSBEndPoint *ep = (MUSBEndPoint *) opaque; - - ep->delayed_cb[0](&ep->packey[0].p, opaque); -} - -static void musb_cb_tick1(void *opaque) -{ - MUSBEndPoint *ep = (MUSBEndPoint *) opaque; - - ep->delayed_cb[1](&ep->packey[1].p, opaque); -} - -#define musb_cb_tick (dir ? musb_cb_tick1 : musb_cb_tick0) - -static void musb_schedule_cb(USBPort *port, USBPacket *packey) -{ - MUSBPacket *p = container_of(packey, MUSBPacket, p); - MUSBEndPoint *ep = p->ep; - int dir = p->dir; - int timeout = 0; - - if (ep->status[dir] == USB_RET_NAK) - timeout = ep->timeout[dir]; - else if (ep->interrupt[dir]) - timeout = 8; - else { - musb_cb_tick(ep); - return; - } - - if (!ep->intv_timer[dir]) - ep->intv_timer[dir] = timer_new_ns(QEMU_CLOCK_VIRTUAL, musb_cb_tick, ep); - - timer_mod(ep->intv_timer[dir], qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + - muldiv64(timeout, NANOSECONDS_PER_SECOND, 8000)); -} - -static int musb_timeout(int ttype, int speed, int val) -{ -#if 1 - return val << 3; -#endif - - switch (ttype) { - case USB_ENDPOINT_XFER_CONTROL: - if (val < 2) - return 0; - else if (speed == USB_SPEED_HIGH) - return 1 << (val - 1); - else - return 8 << (val - 1); - - case USB_ENDPOINT_XFER_INT: - if (speed == USB_SPEED_HIGH) - if (val < 2) - return 0; - else - return 1 << (val - 1); - else - return val << 3; - - case USB_ENDPOINT_XFER_BULK: - case USB_ENDPOINT_XFER_ISOC: - if (val < 2) - return 0; - else if (speed == USB_SPEED_HIGH) - return 1 << (val - 1); - else - return 8 << (val - 1); - /* TODO: what with low-speed Bulk and Isochronous? */ - } - - hw_error("bad interval\n"); -} - -static void musb_packet(MUSBState *s, MUSBEndPoint *ep, - int epnum, int pid, int len, USBCallback cb, int dir) -{ - USBDevice *dev; - USBEndpoint *uep; - int idx = epnum && dir; - int id; - int ttype; - - /* ep->type[0,1] contains: - * in bits 7:6 the speed (0 - invalid, 1 - high, 2 - full, 3 - slow) - * in bits 5:4 the transfer type (BULK / INT) - * in bits 3:0 the EP num - */ - ttype = epnum ? (ep->type[idx] >> 4) & 3 : 0; - - ep->timeout[dir] = musb_timeout(ttype, - ep->type[idx] >> 6, ep->interval[idx]); - ep->interrupt[dir] = ttype == USB_ENDPOINT_XFER_INT; - ep->delayed_cb[dir] = cb; - - /* A wild guess on the FADDR semantics... */ - dev = usb_find_device(&s->port, ep->faddr[idx]); - if (dev == NULL) { - return; - } - uep = usb_ep_get(dev, pid, ep->type[idx] & 0xf); - id = pid | (dev->addr << 16) | (uep->nr << 8); - usb_packet_setup(&ep->packey[dir].p, pid, uep, 0, id, false, true); - usb_packet_addbuf(&ep->packey[dir].p, ep->buf[idx], len); - ep->packey[dir].ep = ep; - ep->packey[dir].dir = dir; - - usb_handle_packet(dev, &ep->packey[dir].p); - - if (ep->packey[dir].p.status == USB_RET_ASYNC) { - usb_device_flush_ep_queue(dev, uep); - ep->status[dir] = len; - return; - } - - if (ep->packey[dir].p.status == USB_RET_SUCCESS) { - ep->status[dir] = ep->packey[dir].p.actual_length; - } else { - ep->status[dir] = ep->packey[dir].p.status; - } - musb_schedule_cb(&s->port, &ep->packey[dir].p); -} - -static void musb_tx_packet_complete(USBPacket *packey, void *opaque) -{ - /* Unfortunately we can't use packey->devep because that's the remote - * endpoint number and may be different than our local. */ - MUSBEndPoint *ep = (MUSBEndPoint *) opaque; - int epnum = ep->epnum; - MUSBState *s = ep->musb; - - ep->fifostart[0] = 0; - ep->fifolen[0] = 0; -#ifdef CLEAR_NAK - if (ep->status[0] != USB_RET_NAK) { -#endif - if (epnum) - ep->csr[0] &= ~(MGC_M_TXCSR_FIFONOTEMPTY | MGC_M_TXCSR_TXPKTRDY); - else - ep->csr[0] &= ~MGC_M_CSR0_TXPKTRDY; -#ifdef CLEAR_NAK - } -#endif - - /* Clear all of the error bits first */ - if (epnum) - ep->csr[0] &= ~(MGC_M_TXCSR_H_ERROR | MGC_M_TXCSR_H_RXSTALL | - MGC_M_TXCSR_H_NAKTIMEOUT); - else - ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL | - MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING); - - if (ep->status[0] == USB_RET_STALL) { - /* Command not supported by target! */ - ep->status[0] = 0; - - if (epnum) - ep->csr[0] |= MGC_M_TXCSR_H_RXSTALL; - else - ep->csr[0] |= MGC_M_CSR0_H_RXSTALL; - } - - if (ep->status[0] == USB_RET_NAK) { - ep->status[0] = 0; - - /* NAK timeouts are only generated in Bulk transfers and - * Data-errors in Isochronous. */ - if (ep->interrupt[0]) { - return; - } - - if (epnum) - ep->csr[0] |= MGC_M_TXCSR_H_NAKTIMEOUT; - else - ep->csr[0] |= MGC_M_CSR0_H_NAKTIMEOUT; - } - - if (ep->status[0] < 0) { - if (ep->status[0] == USB_RET_BABBLE) - musb_intr_set(s, musb_irq_rst_babble, 1); - - /* Pretend we've tried three times already and failed (in - * case of USB_TOKEN_SETUP). */ - if (epnum) - ep->csr[0] |= MGC_M_TXCSR_H_ERROR; - else - ep->csr[0] |= MGC_M_CSR0_H_ERROR; - - musb_tx_intr_set(s, epnum, 1); - return; - } - /* TODO: check len for over/underruns of an OUT packet? */ - -#ifdef SETUPLEN_HACK - if (!epnum && ep->packey[0].pid == USB_TOKEN_SETUP) - s->setup_len = ep->packey[0].data[6]; -#endif - - /* In DMA mode: if no error, assert DMA request for this EP, - * and skip the interrupt. */ - musb_tx_intr_set(s, epnum, 1); -} - -static void musb_rx_packet_complete(USBPacket *packey, void *opaque) -{ - /* Unfortunately we can't use packey->devep because that's the remote - * endpoint number and may be different than our local. */ - MUSBEndPoint *ep = (MUSBEndPoint *) opaque; - int epnum = ep->epnum; - MUSBState *s = ep->musb; - - ep->fifostart[1] = 0; - ep->fifolen[1] = 0; - -#ifdef CLEAR_NAK - if (ep->status[1] != USB_RET_NAK) { -#endif - ep->csr[1] &= ~MGC_M_RXCSR_H_REQPKT; - if (!epnum) - ep->csr[0] &= ~MGC_M_CSR0_H_REQPKT; -#ifdef CLEAR_NAK - } -#endif - - /* Clear all of the imaginable error bits first */ - ep->csr[1] &= ~(MGC_M_RXCSR_H_ERROR | MGC_M_RXCSR_H_RXSTALL | - MGC_M_RXCSR_DATAERROR); - if (!epnum) - ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL | - MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING); - - if (ep->status[1] == USB_RET_STALL) { - ep->status[1] = 0; - - ep->csr[1] |= MGC_M_RXCSR_H_RXSTALL; - if (!epnum) - ep->csr[0] |= MGC_M_CSR0_H_RXSTALL; - } - - if (ep->status[1] == USB_RET_NAK) { - ep->status[1] = 0; - - /* NAK timeouts are only generated in Bulk transfers and - * Data-errors in Isochronous. */ - if (ep->interrupt[1]) { - musb_packet(s, ep, epnum, USB_TOKEN_IN, - packey->iov.size, musb_rx_packet_complete, 1); - return; - } - - ep->csr[1] |= MGC_M_RXCSR_DATAERROR; - if (!epnum) - ep->csr[0] |= MGC_M_CSR0_H_NAKTIMEOUT; - } - - if (ep->status[1] < 0) { - if (ep->status[1] == USB_RET_BABBLE) { - musb_intr_set(s, musb_irq_rst_babble, 1); - return; - } - - /* Pretend we've tried three times already and failed (in - * case of a control transfer). */ - ep->csr[1] |= MGC_M_RXCSR_H_ERROR; - if (!epnum) - ep->csr[0] |= MGC_M_CSR0_H_ERROR; - - musb_rx_intr_set(s, epnum, 1); - return; - } - /* TODO: check len for over/underruns of an OUT packet? */ - /* TODO: perhaps make use of e->ext_size[1] here. */ - - if (!(ep->csr[1] & (MGC_M_RXCSR_H_RXSTALL | MGC_M_RXCSR_DATAERROR))) { - ep->csr[1] |= MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY; - if (!epnum) - ep->csr[0] |= MGC_M_CSR0_RXPKTRDY; - - ep->rxcount = ep->status[1]; /* XXX: MIN(packey->len, ep->maxp[1]); */ - /* In DMA mode: assert DMA request for this EP */ - } - - /* Only if DMA has not been asserted */ - musb_rx_intr_set(s, epnum, 1); -} - -static void musb_async_cancel_device(MUSBState *s, USBDevice *dev) -{ - int ep, dir; - - for (ep = 0; ep < 16; ep++) { - for (dir = 0; dir < 2; dir++) { - if (!usb_packet_is_inflight(&s->ep[ep].packey[dir].p) || - s->ep[ep].packey[dir].p.ep->dev != dev) { - continue; - } - usb_cancel_packet(&s->ep[ep].packey[dir].p); - /* status updates needed here? */ - } - } -} - -static void musb_tx_rdy(MUSBState *s, int epnum) -{ - MUSBEndPoint *ep = s->ep + epnum; - int pid; - int total, valid = 0; - TRACE("start %d, len %d", ep->fifostart[0], ep->fifolen[0] ); - ep->fifostart[0] += ep->fifolen[0]; - ep->fifolen[0] = 0; - - /* XXX: how's the total size of the packet retrieved exactly in - * the generic case? */ - total = ep->maxp[0] & 0x3ff; - - if (ep->ext_size[0]) { - total = ep->ext_size[0]; - ep->ext_size[0] = 0; - valid = 1; - } - - /* If the packet is not fully ready yet, wait for a next segment. */ - if (epnum && (ep->fifostart[0]) < total) - return; - - if (!valid) - total = ep->fifostart[0]; - - pid = USB_TOKEN_OUT; - if (!epnum && (ep->csr[0] & MGC_M_CSR0_H_SETUPPKT)) { - pid = USB_TOKEN_SETUP; - if (total != 8) { - TRACE("illegal SETUPPKT length of %i bytes", total); - } - /* Controller should retry SETUP packets three times on errors - * but it doesn't make sense for us to do that. */ - } - - musb_packet(s, ep, epnum, pid, total, musb_tx_packet_complete, 0); -} - -static void musb_rx_req(MUSBState *s, int epnum) -{ - MUSBEndPoint *ep = s->ep + epnum; - int total; - - /* If we already have a packet, which didn't fit into the - * 64 bytes of the FIFO, only move the FIFO start and return. (Obsolete) */ - if (ep->packey[1].p.pid == USB_TOKEN_IN && ep->status[1] >= 0 && - (ep->fifostart[1]) + ep->rxcount < - ep->packey[1].p.iov.size) { - TRACE("0x%08x, %d", ep->fifostart[1], ep->rxcount ); - ep->fifostart[1] += ep->rxcount; - ep->fifolen[1] = 0; - - ep->rxcount = MIN(ep->packey[0].p.iov.size - (ep->fifostart[1]), - ep->maxp[1]); - - ep->csr[1] &= ~MGC_M_RXCSR_H_REQPKT; - if (!epnum) - ep->csr[0] &= ~MGC_M_CSR0_H_REQPKT; - - /* Clear all of the error bits first */ - ep->csr[1] &= ~(MGC_M_RXCSR_H_ERROR | MGC_M_RXCSR_H_RXSTALL | - MGC_M_RXCSR_DATAERROR); - if (!epnum) - ep->csr[0] &= ~(MGC_M_CSR0_H_ERROR | MGC_M_CSR0_H_RXSTALL | - MGC_M_CSR0_H_NAKTIMEOUT | MGC_M_CSR0_H_NO_PING); - - ep->csr[1] |= MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY; - if (!epnum) - ep->csr[0] |= MGC_M_CSR0_RXPKTRDY; - musb_rx_intr_set(s, epnum, 1); - return; - } - - /* The driver sets maxp[1] to 64 or less because it knows the hardware - * FIFO is this deep. Bigger packets get split in - * usb_generic_handle_packet but we can also do the splitting locally - * for performance. It turns out we can also have a bigger FIFO and - * ignore the limit set in ep->maxp[1]. The Linux MUSB driver deals - * OK with single packets of even 32KB and we avoid splitting, however - * usb_msd.c sometimes sends a packet bigger than what Linux expects - * (e.g. 8192 bytes instead of 4096) and we get an OVERRUN. Splitting - * hides this overrun from Linux. Up to 4096 everything is fine - * though. Currently this is disabled. - * - * XXX: mind ep->fifosize. */ - total = MIN(ep->maxp[1] & 0x3ff, sizeof(s->buf)); - -#ifdef SETUPLEN_HACK - /* Why should *we* do that instead of Linux? */ - if (!epnum) { - if (ep->packey[0].p.devaddr == 2) { - total = MIN(s->setup_len, 8); - } else { - total = MIN(s->setup_len, 64); - } - s->setup_len -= total; - } -#endif - - musb_packet(s, ep, epnum, USB_TOKEN_IN, total, musb_rx_packet_complete, 1); -} - -static uint8_t musb_read_fifo(MUSBEndPoint *ep) -{ - uint8_t value; - if (ep->fifolen[1] >= 64) { - /* We have a FIFO underrun */ - TRACE("EP%d FIFO is now empty, stop reading", ep->epnum); - return 0x00000000; - } - /* In DMA mode clear RXPKTRDY and set REQPKT automatically - * (if AUTOREQ is set) */ - - ep->csr[1] &= ~MGC_M_RXCSR_FIFOFULL; - value=ep->buf[1][ep->fifostart[1] + ep->fifolen[1] ++]; - TRACE("EP%d 0x%02x, %d", ep->epnum, value, ep->fifolen[1] ); - return value; -} - -static void musb_write_fifo(MUSBEndPoint *ep, uint8_t value) -{ - TRACE("EP%d = %02x", ep->epnum, value); - if (ep->fifolen[0] >= 64) { - /* We have a FIFO overrun */ - TRACE("EP%d FIFO exceeded 64 bytes, stop feeding data", ep->epnum); - return; - } - - ep->buf[0][ep->fifostart[0] + ep->fifolen[0] ++] = value; - ep->csr[0] |= MGC_M_TXCSR_FIFONOTEMPTY; -} - -static void musb_ep_frame_cancel(MUSBEndPoint *ep, int dir) -{ - if (ep->intv_timer[dir]) - timer_del(ep->intv_timer[dir]); -} - -/* Bus control */ -static uint8_t musb_busctl_readb(void *opaque, int ep, int addr) -{ - MUSBState *s = (MUSBState *) opaque; - - switch (addr) { - /* For USB2.0 HS hubs only */ - case MUSB_HDRC_TXHUBADDR: - return s->ep[ep].haddr[0]; - case MUSB_HDRC_TXHUBPORT: - return s->ep[ep].hport[0]; - case MUSB_HDRC_RXHUBADDR: - return s->ep[ep].haddr[1]; - case MUSB_HDRC_RXHUBPORT: - return s->ep[ep].hport[1]; - - default: - TRACE("unknown register 0x%02x", addr); - return 0x00; - }; -} - -static void musb_busctl_writeb(void *opaque, int ep, int addr, uint8_t value) -{ - MUSBState *s = (MUSBState *) opaque; - - switch (addr) { - case MUSB_HDRC_TXFUNCADDR: - s->ep[ep].faddr[0] = value; - break; - case MUSB_HDRC_RXFUNCADDR: - s->ep[ep].faddr[1] = value; - break; - case MUSB_HDRC_TXHUBADDR: - s->ep[ep].haddr[0] = value; - break; - case MUSB_HDRC_TXHUBPORT: - s->ep[ep].hport[0] = value; - break; - case MUSB_HDRC_RXHUBADDR: - s->ep[ep].haddr[1] = value; - break; - case MUSB_HDRC_RXHUBPORT: - s->ep[ep].hport[1] = value; - break; - - default: - TRACE("unknown register 0x%02x", addr); - break; - }; -} - -static uint16_t musb_busctl_readh(void *opaque, int ep, int addr) -{ - MUSBState *s = (MUSBState *) opaque; - - switch (addr) { - case MUSB_HDRC_TXFUNCADDR: - return s->ep[ep].faddr[0]; - case MUSB_HDRC_RXFUNCADDR: - return s->ep[ep].faddr[1]; - - default: - return musb_busctl_readb(s, ep, addr) | - (musb_busctl_readb(s, ep, addr | 1) << 8); - }; -} - -static void musb_busctl_writeh(void *opaque, int ep, int addr, uint16_t value) -{ - MUSBState *s = (MUSBState *) opaque; - - switch (addr) { - case MUSB_HDRC_TXFUNCADDR: - s->ep[ep].faddr[0] = value; - break; - case MUSB_HDRC_RXFUNCADDR: - s->ep[ep].faddr[1] = value; - break; - - default: - musb_busctl_writeb(s, ep, addr, value & 0xff); - musb_busctl_writeb(s, ep, addr | 1, value >> 8); - }; -} - -/* Endpoint control */ -static uint8_t musb_ep_readb(void *opaque, int ep, int addr) -{ - MUSBState *s = (MUSBState *) opaque; - - switch (addr) { - case MUSB_HDRC_TXTYPE: - return s->ep[ep].type[0]; - case MUSB_HDRC_TXINTERVAL: - return s->ep[ep].interval[0]; - case MUSB_HDRC_RXTYPE: - return s->ep[ep].type[1]; - case MUSB_HDRC_RXINTERVAL: - return s->ep[ep].interval[1]; - case (MUSB_HDRC_FIFOSIZE & ~1): - return 0x00; - case MUSB_HDRC_FIFOSIZE: - return ep ? s->ep[ep].fifosize : s->ep[ep].config; - case MUSB_HDRC_RXCOUNT: - return s->ep[ep].rxcount; - - default: - TRACE("unknown register 0x%02x", addr); - return 0x00; - }; -} - -static void musb_ep_writeb(void *opaque, int ep, int addr, uint8_t value) -{ - MUSBState *s = (MUSBState *) opaque; - - switch (addr) { - case MUSB_HDRC_TXTYPE: - s->ep[ep].type[0] = value; - break; - case MUSB_HDRC_TXINTERVAL: - s->ep[ep].interval[0] = value; - musb_ep_frame_cancel(&s->ep[ep], 0); - break; - case MUSB_HDRC_RXTYPE: - s->ep[ep].type[1] = value; - break; - case MUSB_HDRC_RXINTERVAL: - s->ep[ep].interval[1] = value; - musb_ep_frame_cancel(&s->ep[ep], 1); - break; - case (MUSB_HDRC_FIFOSIZE & ~1): - break; - case MUSB_HDRC_FIFOSIZE: - TRACE("somebody messes with fifosize (now %i bytes)", value); - s->ep[ep].fifosize = value; - break; - default: - TRACE("unknown register 0x%02x", addr); - break; - }; -} - -static uint16_t musb_ep_readh(void *opaque, int ep, int addr) -{ - MUSBState *s = (MUSBState *) opaque; - uint16_t ret; - - switch (addr) { - case MUSB_HDRC_TXMAXP: - return s->ep[ep].maxp[0]; - case MUSB_HDRC_TXCSR: - return s->ep[ep].csr[0]; - case MUSB_HDRC_RXMAXP: - return s->ep[ep].maxp[1]; - case MUSB_HDRC_RXCSR: - ret = s->ep[ep].csr[1]; - - /* TODO: This and other bits probably depend on - * ep->csr[1] & MGC_M_RXCSR_AUTOCLEAR. */ - if (s->ep[ep].csr[1] & MGC_M_RXCSR_AUTOCLEAR) - s->ep[ep].csr[1] &= ~MGC_M_RXCSR_RXPKTRDY; - - return ret; - case MUSB_HDRC_RXCOUNT: - return s->ep[ep].rxcount; - - default: - return musb_ep_readb(s, ep, addr) | - (musb_ep_readb(s, ep, addr | 1) << 8); - }; -} - -static void musb_ep_writeh(void *opaque, int ep, int addr, uint16_t value) -{ - MUSBState *s = (MUSBState *) opaque; - - switch (addr) { - case MUSB_HDRC_TXMAXP: - s->ep[ep].maxp[0] = value; - break; - case MUSB_HDRC_TXCSR: - if (ep) { - s->ep[ep].csr[0] &= value & 0xa6; - s->ep[ep].csr[0] |= value & 0xff59; - } else { - s->ep[ep].csr[0] &= value & 0x85; - s->ep[ep].csr[0] |= value & 0xf7a; - } - - musb_ep_frame_cancel(&s->ep[ep], 0); - - if ((ep && (value & MGC_M_TXCSR_FLUSHFIFO)) || - (!ep && (value & MGC_M_CSR0_FLUSHFIFO))) { - s->ep[ep].fifolen[0] = 0; - s->ep[ep].fifostart[0] = 0; - if (ep) - s->ep[ep].csr[0] &= - ~(MGC_M_TXCSR_FIFONOTEMPTY | MGC_M_TXCSR_TXPKTRDY); - else - s->ep[ep].csr[0] &= - ~(MGC_M_CSR0_TXPKTRDY | MGC_M_CSR0_RXPKTRDY); - } - if ( - (ep && -#ifdef CLEAR_NAK - (value & MGC_M_TXCSR_TXPKTRDY) && - !(value & MGC_M_TXCSR_H_NAKTIMEOUT)) || -#else - (value & MGC_M_TXCSR_TXPKTRDY)) || -#endif - (!ep && -#ifdef CLEAR_NAK - (value & MGC_M_CSR0_TXPKTRDY) && - !(value & MGC_M_CSR0_H_NAKTIMEOUT))) -#else - (value & MGC_M_CSR0_TXPKTRDY))) -#endif - musb_tx_rdy(s, ep); - if (!ep && - (value & MGC_M_CSR0_H_REQPKT) && -#ifdef CLEAR_NAK - !(value & (MGC_M_CSR0_H_NAKTIMEOUT | - MGC_M_CSR0_RXPKTRDY))) -#else - !(value & MGC_M_CSR0_RXPKTRDY)) -#endif - musb_rx_req(s, ep); - break; - - case MUSB_HDRC_RXMAXP: - s->ep[ep].maxp[1] = value; - break; - case MUSB_HDRC_RXCSR: - /* (DMA mode only) */ - if ( - (value & MGC_M_RXCSR_H_AUTOREQ) && - !(value & MGC_M_RXCSR_RXPKTRDY) && - (s->ep[ep].csr[1] & MGC_M_RXCSR_RXPKTRDY)) - value |= MGC_M_RXCSR_H_REQPKT; - - s->ep[ep].csr[1] &= 0x102 | (value & 0x4d); - s->ep[ep].csr[1] |= value & 0xfeb0; - - musb_ep_frame_cancel(&s->ep[ep], 1); - - if (value & MGC_M_RXCSR_FLUSHFIFO) { - s->ep[ep].fifolen[1] = 0; - s->ep[ep].fifostart[1] = 0; - s->ep[ep].csr[1] &= ~(MGC_M_RXCSR_FIFOFULL | MGC_M_RXCSR_RXPKTRDY); - /* If double buffering and we have two packets ready, flush - * only the first one and set up the fifo at the second packet. */ - } -#ifdef CLEAR_NAK - if ((value & MGC_M_RXCSR_H_REQPKT) && !(value & MGC_M_RXCSR_DATAERROR)) -#else - if (value & MGC_M_RXCSR_H_REQPKT) -#endif - musb_rx_req(s, ep); - break; - case MUSB_HDRC_RXCOUNT: - s->ep[ep].rxcount = value; - break; - - default: - musb_ep_writeb(s, ep, addr, value & 0xff); - musb_ep_writeb(s, ep, addr | 1, value >> 8); - }; -} - -/* Generic control */ -static uint32_t musb_readb(void *opaque, hwaddr addr) -{ - MUSBState *s = (MUSBState *) opaque; - int ep, i; - uint8_t ret; - - switch (addr) { - case MUSB_HDRC_FADDR: - return s->faddr; - case MUSB_HDRC_POWER: - return s->power; - case MUSB_HDRC_INTRUSB: - ret = s->intr; - for (i = 0; i < sizeof(ret) * 8; i ++) - if (ret & (1 << i)) - musb_intr_set(s, i, 0); - return ret; - case MUSB_HDRC_INTRUSBE: - return s->mask; - case MUSB_HDRC_INDEX: - return s->idx; - case MUSB_HDRC_TESTMODE: - return 0x00; - - case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf): - return musb_ep_readb(s, s->idx, addr & 0xf); - - case MUSB_HDRC_DEVCTL: - return s->devctl; - - case MUSB_HDRC_TXFIFOSZ: - case MUSB_HDRC_RXFIFOSZ: - case MUSB_HDRC_VCTRL: - /* TODO */ - return 0x00; - - case MUSB_HDRC_HWVERS: - return (1 << 10) | 400; - - case (MUSB_HDRC_VCTRL | 1): - case (MUSB_HDRC_HWVERS | 1): - case (MUSB_HDRC_DEVCTL | 1): - return 0x00; - - case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f): - ep = (addr >> 3) & 0xf; - return musb_busctl_readb(s, ep, addr & 0x7); - - case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff): - ep = (addr >> 4) & 0xf; - return musb_ep_readb(s, ep, addr & 0xf); - - case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): - ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; - return musb_read_fifo(s->ep + ep); - - default: - TRACE("unknown register 0x%02x", (int) addr); - return 0x00; - }; -} - -static void musb_writeb(void *opaque, hwaddr addr, uint32_t value) -{ - MUSBState *s = (MUSBState *) opaque; - int ep; - - switch (addr) { - case MUSB_HDRC_FADDR: - s->faddr = value & 0x7f; - break; - case MUSB_HDRC_POWER: - s->power = (value & 0xef) | (s->power & 0x10); - /* MGC_M_POWER_RESET is also read-only in Peripheral Mode */ - if ((value & MGC_M_POWER_RESET) && s->port.dev) { - usb_device_reset(s->port.dev); - /* Negotiate high-speed operation if MGC_M_POWER_HSENAB is set. */ - if ((value & MGC_M_POWER_HSENAB) && - s->port.dev->speed == USB_SPEED_HIGH) - s->power |= MGC_M_POWER_HSMODE; /* Success */ - /* Restart frame counting. */ - } - if (value & MGC_M_POWER_SUSPENDM) { - /* When all transfers finish, suspend and if MGC_M_POWER_ENSUSPEND - * is set, also go into low power mode. Frame counting stops. */ - /* XXX: Cleared when the interrupt register is read */ - } - if (value & MGC_M_POWER_RESUME) { - /* Wait 20ms and signal resuming on the bus. Frame counting - * restarts. */ - } - break; - case MUSB_HDRC_INTRUSB: - break; - case MUSB_HDRC_INTRUSBE: - s->mask = value & 0xff; - break; - case MUSB_HDRC_INDEX: - s->idx = value & 0xf; - break; - case MUSB_HDRC_TESTMODE: - break; - - case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf): - musb_ep_writeb(s, s->idx, addr & 0xf, value); - break; - - case MUSB_HDRC_DEVCTL: - s->session = !!(value & MGC_M_DEVCTL_SESSION); - musb_session_update(s, - !!s->port.dev, - !!(s->devctl & MGC_M_DEVCTL_SESSION)); - - /* It seems this is the only R/W bit in this register? */ - s->devctl &= ~MGC_M_DEVCTL_SESSION; - s->devctl |= value & MGC_M_DEVCTL_SESSION; - break; - - case MUSB_HDRC_TXFIFOSZ: - case MUSB_HDRC_RXFIFOSZ: - case MUSB_HDRC_VCTRL: - /* TODO */ - break; - - case (MUSB_HDRC_VCTRL | 1): - case (MUSB_HDRC_DEVCTL | 1): - break; - - case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f): - ep = (addr >> 3) & 0xf; - musb_busctl_writeb(s, ep, addr & 0x7, value); - break; - - case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff): - ep = (addr >> 4) & 0xf; - musb_ep_writeb(s, ep, addr & 0xf, value); - break; - - case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): - ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; - musb_write_fifo(s->ep + ep, value & 0xff); - break; - - default: - TRACE("unknown register 0x%02x", (int) addr); - break; - }; -} - -static uint32_t musb_readh(void *opaque, hwaddr addr) -{ - MUSBState *s = (MUSBState *) opaque; - int ep, i; - uint16_t ret; - - switch (addr) { - case MUSB_HDRC_INTRTX: - ret = s->tx_intr; - /* Auto clear */ - for (i = 0; i < sizeof(ret) * 8; i ++) - if (ret & (1 << i)) - musb_tx_intr_set(s, i, 0); - return ret; - case MUSB_HDRC_INTRRX: - ret = s->rx_intr; - /* Auto clear */ - for (i = 0; i < sizeof(ret) * 8; i ++) - if (ret & (1 << i)) - musb_rx_intr_set(s, i, 0); - return ret; - case MUSB_HDRC_INTRTXE: - return s->tx_mask; - case MUSB_HDRC_INTRRXE: - return s->rx_mask; - - case MUSB_HDRC_FRAME: - /* TODO */ - return 0x0000; - case MUSB_HDRC_TXFIFOADDR: - return s->ep[s->idx].fifoaddr[0]; - case MUSB_HDRC_RXFIFOADDR: - return s->ep[s->idx].fifoaddr[1]; - - case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf): - return musb_ep_readh(s, s->idx, addr & 0xf); - - case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f): - ep = (addr >> 3) & 0xf; - return musb_busctl_readh(s, ep, addr & 0x7); - - case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff): - ep = (addr >> 4) & 0xf; - return musb_ep_readh(s, ep, addr & 0xf); - - case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): - ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; - return (musb_read_fifo(s->ep + ep) | musb_read_fifo(s->ep + ep) << 8); - - default: - return musb_readb(s, addr) | (musb_readb(s, addr | 1) << 8); - }; -} - -static void musb_writeh(void *opaque, hwaddr addr, uint32_t value) -{ - MUSBState *s = (MUSBState *) opaque; - int ep; - - switch (addr) { - case MUSB_HDRC_INTRTXE: - s->tx_mask = value; - /* XXX: the masks seem to apply on the raising edge like with - * edge-triggered interrupts, thus no need to update. I may be - * wrong though. */ - break; - case MUSB_HDRC_INTRRXE: - s->rx_mask = value; - break; - - case MUSB_HDRC_FRAME: - /* TODO */ - break; - case MUSB_HDRC_TXFIFOADDR: - s->ep[s->idx].fifoaddr[0] = value; - s->ep[s->idx].buf[0] = - s->buf + ((value << 3) & 0x7ff ); - break; - case MUSB_HDRC_RXFIFOADDR: - s->ep[s->idx].fifoaddr[1] = value; - s->ep[s->idx].buf[1] = - s->buf + ((value << 3) & 0x7ff); - break; - - case MUSB_HDRC_EP_IDX ... (MUSB_HDRC_EP_IDX + 0xf): - musb_ep_writeh(s, s->idx, addr & 0xf, value); - break; - - case MUSB_HDRC_BUSCTL ... (MUSB_HDRC_BUSCTL + 0x7f): - ep = (addr >> 3) & 0xf; - musb_busctl_writeh(s, ep, addr & 0x7, value); - break; - - case MUSB_HDRC_EP ... (MUSB_HDRC_EP + 0xff): - ep = (addr >> 4) & 0xf; - musb_ep_writeh(s, ep, addr & 0xf, value); - break; - - case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): - ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; - musb_write_fifo(s->ep + ep, value & 0xff); - musb_write_fifo(s->ep + ep, (value >> 8) & 0xff); - break; - - default: - musb_writeb(s, addr, value & 0xff); - musb_writeb(s, addr | 1, value >> 8); - }; -} - -static uint32_t musb_readw(void *opaque, hwaddr addr) -{ - MUSBState *s = (MUSBState *) opaque; - int ep; - - switch (addr) { - case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): - ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; - return ( musb_read_fifo(s->ep + ep) | - musb_read_fifo(s->ep + ep) << 8 | - musb_read_fifo(s->ep + ep) << 16 | - musb_read_fifo(s->ep + ep) << 24 ); - default: - TRACE("unknown register 0x%02x", (int) addr); - return 0x00000000; - }; -} - -static void musb_writew(void *opaque, hwaddr addr, uint32_t value) -{ - MUSBState *s = (MUSBState *) opaque; - int ep; - - switch (addr) { - case MUSB_HDRC_FIFO ... (MUSB_HDRC_FIFO + 0x3f): - ep = ((addr - MUSB_HDRC_FIFO) >> 2) & 0xf; - musb_write_fifo(s->ep + ep, value & 0xff); - musb_write_fifo(s->ep + ep, (value >> 8 ) & 0xff); - musb_write_fifo(s->ep + ep, (value >> 16) & 0xff); - musb_write_fifo(s->ep + ep, (value >> 24) & 0xff); - break; - default: - TRACE("unknown register 0x%02x", (int) addr); - break; - }; -} - -MUSBReadFunc * const musb_read[] = { - musb_readb, - musb_readh, - musb_readw, -}; - -MUSBWriteFunc * const musb_write[] = { - musb_writeb, - musb_writeh, - musb_writew, -}; diff --git a/hw/usb/Kconfig b/hw/usb/Kconfig index 0bffcda1b19..5fbecd2f43b 100644 --- a/hw/usb/Kconfig +++ b/hw/usb/Kconfig @@ -53,10 +53,6 @@ config USB_XHCI_SYSBUS bool select USB_XHCI -config USB_MUSB - bool - select USB - config USB_DWC2 bool select USB diff --git a/hw/usb/meson.build b/hw/usb/meson.build index ae901481597..1b4d1507e41 100644 --- a/hw/usb/meson.build +++ b/hw/usb/meson.build @@ -23,7 +23,6 @@ system_ss.add(when: 'CONFIG_USB_XHCI', if_true: files('hcd-xhci.c')) system_ss.add(when: 'CONFIG_USB_XHCI_PCI', if_true: files('hcd-xhci-pci.c')) system_ss.add(when: 'CONFIG_USB_XHCI_SYSBUS', if_true: files('hcd-xhci-sysbus.c')) system_ss.add(when: 'CONFIG_USB_XHCI_NEC', if_true: files('hcd-xhci-nec.c')) -system_ss.add(when: 'CONFIG_USB_MUSB', if_true: files('hcd-musb.c')) system_ss.add(when: 'CONFIG_USB_DWC2', if_true: files('hcd-dwc2.c')) system_ss.add(when: 'CONFIG_USB_DWC3', if_true: files('hcd-dwc3.c'))