Message ID | 20241107012223.94337-8-philmd@linaro.org (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | hw/microblaze: Allow running cross-endian vCPUs | expand |
On 11/7/24 01:22, Philippe Mathieu-Daudé wrote: > Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair > of DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN. > Add the "little-endian" property to select the device > endianness, defaulting to little endian. > Set the proper endianness on the single machine using the > device. > > Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> > --- > hw/char/xilinx_uartlite.c | 44 ++++++++++++++++-------- > hw/microblaze/petalogix_s3adsp1800_mmu.c | 1 + > 2 files changed, 31 insertions(+), 14 deletions(-) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> > +static const MemoryRegionOps uart_ops[2] = { > + { > + .read = uart_read, > + .write = uart_write, > + .endianness = DEVICE_BIG_ENDIAN, > + .impl = { > + .min_access_size = 4, > + .max_access_size = 4, > + }, > + .valid = { > + .min_access_size = 1, > + .max_access_size = 4, > + }, > + }, { > + .read = uart_read, > + .write = uart_write, > + .endianness = DEVICE_LITTLE_ENDIAN, > + .impl = { > + .min_access_size = 4, > + .max_access_size = 4, > + }, > + .valid = { > + .min_access_size = 1, > + .max_access_size = 4, > + }, > } > }; Having looked at several of these now, it occurs to me that you can avoid repetition: static const MemoryRegionOps uart_ops[2] = { [0 ... 1] = { .read = uart_read, etc, }, [0].endianness = DEVICE_BIG_ENDIAN, [1].endianness = DEVICE_LITTLE_ENDIAN, }; r~
On 7/11/24 10:27, Richard Henderson wrote: > On 11/7/24 01:22, Philippe Mathieu-Daudé wrote: >> Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair >> of DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN. >> Add the "little-endian" property to select the device >> endianness, defaulting to little endian. >> Set the proper endianness on the single machine using the >> device. >> >> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> >> --- >> hw/char/xilinx_uartlite.c | 44 ++++++++++++++++-------- >> hw/microblaze/petalogix_s3adsp1800_mmu.c | 1 + >> 2 files changed, 31 insertions(+), 14 deletions(-) > > Reviewed-by: Richard Henderson <richard.henderson@linaro.org> > >> +static const MemoryRegionOps uart_ops[2] = { >> + { >> + .read = uart_read, >> + .write = uart_write, >> + .endianness = DEVICE_BIG_ENDIAN, >> + .impl = { >> + .min_access_size = 4, >> + .max_access_size = 4, >> + }, >> + .valid = { >> + .min_access_size = 1, >> + .max_access_size = 4, >> + }, >> + }, { >> + .read = uart_read, >> + .write = uart_write, >> + .endianness = DEVICE_LITTLE_ENDIAN, >> + .impl = { >> + .min_access_size = 4, >> + .max_access_size = 4, >> + }, >> + .valid = { >> + .min_access_size = 1, >> + .max_access_size = 4, >> + }, >> } >> }; > > Having looked at several of these now, it occurs to me that you can > avoid repetition: > > static const MemoryRegionOps uart_ops[2] = { > [0 ... 1] = { > .read = uart_read, > etc, > }, > [0].endianness = DEVICE_BIG_ENDIAN, > [1].endianness = DEVICE_LITTLE_ENDIAN, > }; Thank you :) I had the idea it was possible then forgot about it.
diff --git a/hw/char/xilinx_uartlite.c b/hw/char/xilinx_uartlite.c index 3022b3d8ef..c43bf1a030 100644 --- a/hw/char/xilinx_uartlite.c +++ b/hw/char/xilinx_uartlite.c @@ -57,6 +57,7 @@ struct XilinxUARTLite { SysBusDevice parent_obj; + bool little_endian_model; MemoryRegion mmio; CharBackend chr; qemu_irq irq; @@ -166,21 +167,36 @@ uart_write(void *opaque, hwaddr addr, uart_update_irq(s); } -static const MemoryRegionOps uart_ops = { - .read = uart_read, - .write = uart_write, - .endianness = DEVICE_NATIVE_ENDIAN, - .impl = { - .min_access_size = 4, - .max_access_size = 4, - }, - .valid = { - .min_access_size = 1, - .max_access_size = 4 +static const MemoryRegionOps uart_ops[2] = { + { + .read = uart_read, + .write = uart_write, + .endianness = DEVICE_BIG_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + }, + }, { + .read = uart_read, + .write = uart_write, + .endianness = DEVICE_LITTLE_ENDIAN, + .impl = { + .min_access_size = 4, + .max_access_size = 4, + }, + .valid = { + .min_access_size = 1, + .max_access_size = 4, + }, } }; static Property xilinx_uartlite_properties[] = { + DEFINE_PROP_BOOL("little-endian", XilinxUARTLite, little_endian_model, true), DEFINE_PROP_CHR("chardev", XilinxUARTLite, chr), DEFINE_PROP_END_OF_LIST(), }; @@ -219,6 +235,9 @@ static void xilinx_uartlite_realize(DeviceState *dev, Error **errp) { XilinxUARTLite *s = XILINX_UARTLITE(dev); + memory_region_init_io(&s->mmio, OBJECT(dev), + &uart_ops[s->little_endian_model], + s, "xlnx.xps-uartlite", R_MAX * 4); qemu_chr_fe_set_handlers(&s->chr, uart_can_rx, uart_rx, uart_event, NULL, s, NULL, true); } @@ -228,9 +247,6 @@ static void xilinx_uartlite_init(Object *obj) XilinxUARTLite *s = XILINX_UARTLITE(obj); sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq); - - memory_region_init_io(&s->mmio, obj, &uart_ops, s, - "xlnx.xps-uartlite", R_MAX * 4); sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio); } diff --git a/hw/microblaze/petalogix_s3adsp1800_mmu.c b/hw/microblaze/petalogix_s3adsp1800_mmu.c index c0136d84c3..bd8b85fa54 100644 --- a/hw/microblaze/petalogix_s3adsp1800_mmu.c +++ b/hw/microblaze/petalogix_s3adsp1800_mmu.c @@ -107,6 +107,7 @@ petalogix_s3adsp1800_init(MachineState *machine) } dev = qdev_new(TYPE_XILINX_UARTLITE); + qdev_prop_set_bit(dev, "little-endian", !TARGET_BIG_ENDIAN); qdev_prop_set_chr(dev, "chardev", serial_hd(0)); sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, UARTLITE_BASEADDR);
Replace the DEVICE_NATIVE_ENDIAN MemoryRegionOps by a pair of DEVICE_LITTLE_ENDIAN / DEVICE_BIG_ENDIAN. Add the "little-endian" property to select the device endianness, defaulting to little endian. Set the proper endianness on the single machine using the device. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- hw/char/xilinx_uartlite.c | 44 ++++++++++++++++-------- hw/microblaze/petalogix_s3adsp1800_mmu.c | 1 + 2 files changed, 31 insertions(+), 14 deletions(-)