@@ -332,6 +332,7 @@ tpmemu_files = ['tpm-emu.c', 'tpm-util.c', 'tpm-tests.c']
migration_files = [files(
'migration/bootfile.c',
+ 'migration/test-framework.c',
'migration/migration-qmp.c',
'migration/migration-util.c',
)]
@@ -23,6 +23,7 @@
#include "ppc-util.h"
#include "migration/bootfile.h"
+#include "migration/test-framework.h"
#include "migration/migration-qmp.h"
#include "migration/migration-util.h"
#ifdef CONFIG_GNUTLS
@@ -32,25 +33,6 @@
# endif /* CONFIG_TASN1 */
#endif /* CONFIG_GNUTLS */
-unsigned start_address;
-unsigned end_address;
-static QTestMigrationState src_state;
-static QTestMigrationState dst_state;
-
-/*
- * An initial 3 MB offset is used as that corresponds
- * to ~1 sec of data transfer with our bandwidth setting.
- */
-#define MAGIC_OFFSET_BASE (3 * 1024 * 1024)
-/*
- * A further 1k is added to ensure we're not a multiple
- * of TEST_MEM_PAGE_SIZE, thus avoid clash with writes
- * from the migration guest workload.
- */
-#define MAGIC_OFFSET_SHUFFLE 1024
-#define MAGIC_OFFSET (MAGIC_OFFSET_BASE + MAGIC_OFFSET_SHUFFLE)
-#define MAGIC_MARKER 0xFEED12345678CAFEULL
-
/*
* Dirtylimit stop working if dirty page rate error
* value less than DIRTYLIMIT_TOLERANCE_RANGE
@@ -59,543 +41,13 @@ static QTestMigrationState dst_state;
#define ANALYZE_SCRIPT "scripts/analyze-migration.py"
-#define QEMU_VM_FILE_MAGIC 0x5145564d
-#define FILE_TEST_FILENAME "migfile"
-#define FILE_TEST_OFFSET 0x1000
-#define FILE_TEST_MARKER 'X'
-#define QEMU_ENV_SRC "QTEST_QEMU_BINARY_SRC"
-#define QEMU_ENV_DST "QTEST_QEMU_BINARY_DST"
-
-typedef enum PostcopyRecoveryFailStage {
- /*
- * "no failure" must be 0 as it's the default. OTOH, real failure
- * cases must be >0 to make sure they trigger by a "if" test.
- */
- POSTCOPY_FAIL_NONE = 0,
- POSTCOPY_FAIL_CHANNEL_ESTABLISH,
- POSTCOPY_FAIL_RECOVERY,
- POSTCOPY_FAIL_MAX
-} PostcopyRecoveryFailStage;
-
#if defined(__linux__)
+#include <sys/ioctl.h>
#include <sys/syscall.h>
#include <sys/vfs.h>
#endif
static char *tmpfs;
-static char *bootpath;
-
-typedef struct MigrationTestEnv {
- bool has_kvm;
- bool has_tcg;
- bool has_uffd;
- bool uffd_feature_thread_id;
- bool has_dirty_ring;
- bool is_x86;
- const char *arch;
- const char *qemu_src;
- const char *qemu_dst;
- char *tmpfs;
-} MigrationTestEnv;
-
-
-MigrationTestEnv *migration_get_env(void);
-
-/*
- * Wait for some output in the serial output file,
- * we get an 'A' followed by an endless string of 'B's
- * but on the destination we won't have the A (unless we enabled suspend/resume)
- */
-static void wait_for_serial(const char *side)
-{
- g_autofree char *serialpath = g_strdup_printf("%s/%s", tmpfs, side);
- FILE *serialfile = fopen(serialpath, "r");
-
- do {
- int readvalue = fgetc(serialfile);
-
- switch (readvalue) {
- case 'A':
- /* Fine */
- break;
-
- case 'B':
- /* It's alive! */
- fclose(serialfile);
- return;
-
- case EOF:
- fseek(serialfile, 0, SEEK_SET);
- usleep(1000);
- break;
-
- default:
- fprintf(stderr, "Unexpected %d on %s serial\n", readvalue, side);
- g_assert_not_reached();
- }
- } while (true);
-}
-
-static void check_guests_ram(QTestState *who)
-{
- /* Our ASM test will have been incrementing one byte from each page from
- * start_address to < end_address in order. This gives us a constraint
- * that any page's byte should be equal or less than the previous pages
- * byte (mod 256); and they should all be equal except for one transition
- * at the point where we meet the incrementer. (We're running this with
- * the guest stopped).
- */
- unsigned address;
- uint8_t first_byte;
- uint8_t last_byte;
- bool hit_edge = false;
- int bad = 0;
-
- qtest_memread(who, start_address, &first_byte, 1);
- last_byte = first_byte;
-
- for (address = start_address + TEST_MEM_PAGE_SIZE; address < end_address;
- address += TEST_MEM_PAGE_SIZE)
- {
- uint8_t b;
- qtest_memread(who, address, &b, 1);
- if (b != last_byte) {
- if (((b + 1) % 256) == last_byte && !hit_edge) {
- /* This is OK, the guest stopped at the point of
- * incrementing the previous page but didn't get
- * to us yet.
- */
- hit_edge = true;
- last_byte = b;
- } else {
- bad++;
- if (bad <= 10) {
- fprintf(stderr, "Memory content inconsistency at %x"
- " first_byte = %x last_byte = %x current = %x"
- " hit_edge = %x\n",
- address, first_byte, last_byte, b, hit_edge);
- }
- }
- }
- }
- if (bad >= 10) {
- fprintf(stderr, "and in another %d pages", bad - 10);
- }
- g_assert(bad == 0);
-}
-
-static void cleanup(const char *filename)
-{
- g_autofree char *path = g_strdup_printf("%s/%s", tmpfs, filename);
-
- unlink(path);
-}
-
-/*
- * Our goal is to ensure that we run a single full migration
- * iteration, and also dirty memory, ensuring that at least
- * one further iteration is required.
- *
- * We can't directly synchronize with the start of a migration
- * so we have to apply some tricks monitoring memory that is
- * transferred.
- *
- * Initially we set the migration bandwidth to an insanely
- * low value, with tiny max downtime too. This basically
- * guarantees migration will never complete.
- *
- * This will result in a test that is unacceptably slow though,
- * so we can't let the entire migration pass run at this speed.
- * Our intent is to let it run just long enough that we can
- * prove data prior to the marker has been transferred *AND*
- * also prove this transferred data is dirty again.
- *
- * Before migration starts, we write a 64-bit magic marker
- * into a fixed location in the src VM RAM.
- *
- * Then watch dst memory until the marker appears. This is
- * proof that start_address -> MAGIC_OFFSET_BASE has been
- * transferred.
- *
- * Finally we go back to the source and read a byte just
- * before the marker until we see it flip in value. This
- * is proof that start_address -> MAGIC_OFFSET_BASE
- * is now dirty again.
- *
- * IOW, we're guaranteed at least a 2nd migration pass
- * at this point.
- *
- * We can now let migration run at full speed to finish
- * the test
- */
-static void migrate_prepare_for_dirty_mem(QTestState *from)
-{
- /*
- * The guest workflow iterates from start_address to
- * end_address, writing 1 byte every TEST_MEM_PAGE_SIZE
- * bytes.
- *
- * IOW, if we write to mem at a point which is NOT
- * a multiple of TEST_MEM_PAGE_SIZE, our write won't
- * conflict with the migration workflow.
- *
- * We put in a marker here, that we'll use to determine
- * when the data has been transferred to the dst.
- */
- qtest_writeq(from, start_address + MAGIC_OFFSET, MAGIC_MARKER);
-}
-
-static void migrate_wait_for_dirty_mem(QTestState *from,
- QTestState *to)
-{
- uint64_t watch_address = start_address + MAGIC_OFFSET_BASE;
- uint64_t marker_address = start_address + MAGIC_OFFSET;
- uint8_t watch_byte;
-
- /*
- * Wait for the MAGIC_MARKER to get transferred, as an
- * indicator that a migration pass has made some known
- * amount of progress.
- */
- do {
- usleep(1000 * 10);
- } while (qtest_readq(to, marker_address) != MAGIC_MARKER);
-
-
- /* If suspended, src only iterates once, and watch_byte may never change */
- if (src_state.suspend_me) {
- return;
- }
-
- /*
- * Now ensure that already transferred bytes are
- * dirty again from the guest workload. Note the
- * guest byte value will wrap around and by chance
- * match the original watch_byte. This is harmless
- * as we'll eventually see a different value if we
- * keep watching
- */
- watch_byte = qtest_readb(from, watch_address);
- do {
- usleep(1000 * 10);
- } while (qtest_readb(from, watch_address) == watch_byte);
-}
-
-typedef struct {
- /*
- * QTEST_LOG=1 may override this. When QTEST_LOG=1, we always dump errors
- * unconditionally, because it means the user would like to be verbose.
- */
- bool hide_stderr;
- bool use_shmem;
- /* only launch the target process */
- bool only_target;
- /* Use dirty ring if true; dirty logging otherwise */
- bool use_dirty_ring;
- const char *opts_source;
- const char *opts_target;
- /* suspend the src before migrating to dest. */
- bool suspend_me;
-} MigrateStart;
-
-/*
- * A hook that runs after the src and dst QEMUs have been
- * created, but before the migration is started. This can
- * be used to set migration parameters and capabilities.
- *
- * Returns: NULL, or a pointer to opaque state to be
- * later passed to the TestMigrateFinishHook
- */
-typedef void * (*TestMigrateStartHook)(QTestState *from,
- QTestState *to);
-
-/*
- * A hook that runs after the migration has finished,
- * regardless of whether it succeeded or failed, but
- * before QEMU has terminated (unless it self-terminated
- * due to migration error)
- *
- * @opaque is a pointer to state previously returned
- * by the TestMigrateStartHook if any, or NULL.
- */
-typedef void (*TestMigrateEndHook)(QTestState *from,
- QTestState *to,
- void *opaque);
-
-typedef struct {
- /* Optional: fine tune start parameters */
- MigrateStart start;
-
- /* Required: the URI for the dst QEMU to listen on */
- const char *listen_uri;
-
- /*
- * Optional: the URI for the src QEMU to connect to
- * If NULL, then it will query the dst QEMU for its actual
- * listening address and use that as the connect address.
- * This allows for dynamically picking a free TCP port.
- */
- const char *connect_uri;
-
- /*
- * Optional: JSON-formatted list of src QEMU URIs. If a port is
- * defined as '0' in any QDict key a value of '0' will be
- * automatically converted to the correct destination port.
- */
- const char *connect_channels;
-
- /* Optional: callback to run at start to set migration parameters */
- TestMigrateStartHook start_hook;
- /* Optional: callback to run at finish to cleanup */
- TestMigrateEndHook end_hook;
-
- /*
- * Optional: normally we expect the migration process to complete.
- *
- * There can be a variety of reasons and stages in which failure
- * can happen during tests.
- *
- * If a failure is expected to happen at time of establishing
- * the connection, then MIG_TEST_FAIL will indicate that the dst
- * QEMU is expected to stay running and accept future migration
- * connections.
- *
- * If a failure is expected to happen while processing the
- * migration stream, then MIG_TEST_FAIL_DEST_QUIT_ERR will indicate
- * that the dst QEMU is expected to quit with non-zero exit status
- */
- enum {
- /* This test should succeed, the default */
- MIG_TEST_SUCCEED = 0,
- /* This test should fail, dest qemu should keep alive */
- MIG_TEST_FAIL,
- /* This test should fail, dest qemu should fail with abnormal status */
- MIG_TEST_FAIL_DEST_QUIT_ERR,
- /* The QMP command for this migration should fail with an error */
- MIG_TEST_QMP_ERROR,
- } result;
-
- /*
- * Optional: set number of migration passes to wait for, if live==true.
- * If zero, then merely wait for a few MB of dirty data
- */
- unsigned int iterations;
-
- /*
- * Optional: whether the guest CPUs should be running during a precopy
- * migration test. We used to always run with live but it took much
- * longer so we reduced live tests to only the ones that have solid
- * reason to be tested live-only. For each of the new test cases for
- * precopy please provide justifications to use live explicitly (please
- * refer to existing ones with live=true), or use live=off by default.
- */
- bool live;
-
- /* Postcopy specific fields */
- void *postcopy_data;
- bool postcopy_preempt;
- PostcopyRecoveryFailStage postcopy_recovery_fail_stage;
-} MigrateCommon;
-
-static int migrate_start(QTestState **from, QTestState **to,
- const char *uri, MigrateStart *args)
-{
- g_autofree gchar *arch_source = NULL;
- g_autofree gchar *arch_target = NULL;
- /* options for source and target */
- g_autofree gchar *arch_opts = NULL;
- g_autofree gchar *cmd_source = NULL;
- g_autofree gchar *cmd_target = NULL;
- const gchar *ignore_stderr;
- g_autofree char *shmem_opts = NULL;
- g_autofree char *shmem_path = NULL;
- const char *kvm_opts = NULL;
- const char *arch = qtest_get_arch();
- const char *memory_size;
- const char *machine_alias, *machine_opts = "";
- g_autofree char *machine = NULL;
-
- if (args->use_shmem) {
- if (!g_file_test("/dev/shm", G_FILE_TEST_IS_DIR)) {
- g_test_skip("/dev/shm is not supported");
- return -1;
- }
- }
-
- dst_state = (QTestMigrationState) { };
- src_state = (QTestMigrationState) { };
- bootpath = bootfile_create(arch, tmpfs, args->suspend_me);
- src_state.suspend_me = args->suspend_me;
-
- if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
- memory_size = "150M";
-
- if (g_str_equal(arch, "i386")) {
- machine_alias = "pc";
- } else {
- machine_alias = "q35";
- }
- arch_opts = g_strdup_printf(
- "-drive if=none,id=d0,file=%s,format=raw "
- "-device ide-hd,drive=d0,secs=1,cyls=1,heads=1", bootpath);
- start_address = X86_TEST_MEM_START;
- end_address = X86_TEST_MEM_END;
- } else if (g_str_equal(arch, "s390x")) {
- memory_size = "128M";
- machine_alias = "s390-ccw-virtio";
- arch_opts = g_strdup_printf("-bios %s", bootpath);
- start_address = S390_TEST_MEM_START;
- end_address = S390_TEST_MEM_END;
- } else if (strcmp(arch, "ppc64") == 0) {
- memory_size = "256M";
- start_address = PPC_TEST_MEM_START;
- end_address = PPC_TEST_MEM_END;
- machine_alias = "pseries";
- machine_opts = "vsmt=8";
- arch_opts = g_strdup_printf(
- "-nodefaults -machine " PSERIES_DEFAULT_CAPABILITIES " "
- "-bios %s", bootpath);
- } else if (strcmp(arch, "aarch64") == 0) {
- memory_size = "150M";
- machine_alias = "virt";
- machine_opts = "gic-version=3";
- arch_opts = g_strdup_printf("-cpu max -kernel %s", bootpath);
- start_address = ARM_TEST_MEM_START;
- end_address = ARM_TEST_MEM_END;
- } else {
- g_assert_not_reached();
- }
-
- if (!getenv("QTEST_LOG") && args->hide_stderr) {
-#ifndef _WIN32
- ignore_stderr = "2>/dev/null";
-#else
- /*
- * On Windows the QEMU executable is created via CreateProcess() and
- * IO redirection does not work, so don't bother adding IO redirection
- * to the command line.
- */
- ignore_stderr = "";
-#endif
- } else {
- ignore_stderr = "";
- }
-
- if (args->use_shmem) {
- shmem_path = g_strdup_printf("/dev/shm/qemu-%d", getpid());
- shmem_opts = g_strdup_printf(
- "-object memory-backend-file,id=mem0,size=%s"
- ",mem-path=%s,share=on -numa node,memdev=mem0",
- memory_size, shmem_path);
- }
-
- if (args->use_dirty_ring) {
- kvm_opts = ",dirty-ring-size=4096";
- }
-
- if (!qtest_has_machine(machine_alias)) {
- g_autofree char *msg = g_strdup_printf("machine %s not supported", machine_alias);
- g_test_skip(msg);
- return -1;
- }
-
- machine = resolve_machine_version(machine_alias, QEMU_ENV_SRC,
- QEMU_ENV_DST);
-
- g_test_message("Using machine type: %s", machine);
-
- cmd_source = g_strdup_printf("-accel kvm%s -accel tcg "
- "-machine %s,%s "
- "-name source,debug-threads=on "
- "-m %s "
- "-serial file:%s/src_serial "
- "%s %s %s %s %s",
- kvm_opts ? kvm_opts : "",
- machine, machine_opts,
- memory_size, tmpfs,
- arch_opts ? arch_opts : "",
- arch_source ? arch_source : "",
- shmem_opts ? shmem_opts : "",
- args->opts_source ? args->opts_source : "",
- ignore_stderr);
- if (!args->only_target) {
- *from = qtest_init_with_env(QEMU_ENV_SRC, cmd_source);
- qtest_qmp_set_event_callback(*from,
- migrate_watch_for_events,
- &src_state);
- }
-
- cmd_target = g_strdup_printf("-accel kvm%s -accel tcg "
- "-machine %s,%s "
- "-name target,debug-threads=on "
- "-m %s "
- "-serial file:%s/dest_serial "
- "-incoming %s "
- "%s %s %s %s %s",
- kvm_opts ? kvm_opts : "",
- machine, machine_opts,
- memory_size, tmpfs, uri,
- arch_opts ? arch_opts : "",
- arch_target ? arch_target : "",
- shmem_opts ? shmem_opts : "",
- args->opts_target ? args->opts_target : "",
- ignore_stderr);
- *to = qtest_init_with_env(QEMU_ENV_DST, cmd_target);
- qtest_qmp_set_event_callback(*to,
- migrate_watch_for_events,
- &dst_state);
-
- /*
- * Remove shmem file immediately to avoid memory leak in test failed case.
- * It's valid because QEMU has already opened this file
- */
- if (args->use_shmem) {
- unlink(shmem_path);
- }
-
- /*
- * Always enable migration events. Libvirt always uses it, let's try
- * to mimic as closer as that.
- */
- migrate_set_capability(*from, "events", true);
- migrate_set_capability(*to, "events", true);
-
- return 0;
-}
-
-static void migrate_end(QTestState *from, QTestState *to, bool test_dest)
-{
- unsigned char dest_byte_a, dest_byte_b, dest_byte_c, dest_byte_d;
-
- qtest_quit(from);
-
- if (test_dest) {
- qtest_memread(to, start_address, &dest_byte_a, 1);
-
- /* Destination still running, wait for a byte to change */
- do {
- qtest_memread(to, start_address, &dest_byte_b, 1);
- usleep(1000 * 10);
- } while (dest_byte_a == dest_byte_b);
-
- qtest_qmp_assert_success(to, "{ 'execute' : 'stop'}");
-
- /* With it stopped, check nothing changes */
- qtest_memread(to, start_address, &dest_byte_c, 1);
- usleep(1000 * 200);
- qtest_memread(to, start_address, &dest_byte_d, 1);
- g_assert_cmpint(dest_byte_c, ==, dest_byte_d);
-
- check_guests_ram(to);
- }
-
- qtest_quit(to);
-
- cleanup("migsocket");
- cleanup("src_serial");
- cleanup("dest_serial");
- cleanup(FILE_TEST_FILENAME);
-}
#ifdef CONFIG_GNUTLS
struct TestMigrateTLSPSKData {
@@ -936,92 +388,6 @@ migrate_hook_end_tls_x509(QTestState *from,
#endif /* CONFIG_TASN1 */
#endif /* CONFIG_GNUTLS */
-static int migrate_postcopy_prepare(QTestState **from_ptr,
- QTestState **to_ptr,
- MigrateCommon *args)
-{
- QTestState *from, *to;
-
- if (migrate_start(&from, &to, "defer", &args->start)) {
- return -1;
- }
-
- if (args->start_hook) {
- args->postcopy_data = args->start_hook(from, to);
- }
-
- migrate_set_capability(from, "postcopy-ram", true);
- migrate_set_capability(to, "postcopy-ram", true);
- migrate_set_capability(to, "postcopy-blocktime", true);
-
- if (args->postcopy_preempt) {
- migrate_set_capability(from, "postcopy-preempt", true);
- migrate_set_capability(to, "postcopy-preempt", true);
- }
-
- migrate_ensure_non_converge(from);
-
- migrate_prepare_for_dirty_mem(from);
- qtest_qmp_assert_success(to, "{ 'execute': 'migrate-incoming',"
- " 'arguments': { "
- " 'channels': [ { 'channel-type': 'main',"
- " 'addr': { 'transport': 'socket',"
- " 'type': 'inet',"
- " 'host': '127.0.0.1',"
- " 'port': '0' } } ] } }");
-
- /* Wait for the first serial output from the source */
- wait_for_serial("src_serial");
- wait_for_suspend(from, &src_state);
-
- migrate_qmp(from, to, NULL, NULL, "{}");
-
- migrate_wait_for_dirty_mem(from, to);
-
- *from_ptr = from;
- *to_ptr = to;
-
- return 0;
-}
-
-static void migrate_postcopy_complete(QTestState *from, QTestState *to,
- MigrateCommon *args)
-{
- MigrationTestEnv *env = migration_get_env();
-
- wait_for_migration_complete(from);
-
- if (args->start.suspend_me) {
- /* wakeup succeeds only if guest is suspended */
- qtest_qmp_assert_success(to, "{'execute': 'system_wakeup'}");
- }
-
- /* Make sure we get at least one "B" on destination */
- wait_for_serial("dest_serial");
-
- if (env->uffd_feature_thread_id) {
- read_blocktime(to);
- }
-
- if (args->end_hook) {
- args->end_hook(from, to, args->postcopy_data);
- args->postcopy_data = NULL;
- }
-
- migrate_end(from, to, true);
-}
-
-static void test_postcopy_common(MigrateCommon *args)
-{
- QTestState *from, *to;
-
- if (migrate_postcopy_prepare(&from, &to, args)) {
- return;
- }
- migrate_postcopy_start(from, to, &src_state);
- migrate_postcopy_complete(from, to, args);
-}
-
static void test_postcopy(void)
{
MigrateCommon args = { };
@@ -1070,192 +436,6 @@ static void test_postcopy_preempt_tls_psk(void)
}
#endif
-static void wait_for_postcopy_status(QTestState *one, const char *status)
-{
- wait_for_migration_status(one, status,
- (const char * []) {
- "failed", "active",
- "completed", NULL
- });
-}
-
-static void postcopy_recover_fail(QTestState *from, QTestState *to,
- PostcopyRecoveryFailStage stage)
-{
-#ifndef _WIN32
- bool fail_early = (stage == POSTCOPY_FAIL_CHANNEL_ESTABLISH);
- int ret, pair1[2], pair2[2];
- char c;
-
- g_assert(stage > POSTCOPY_FAIL_NONE && stage < POSTCOPY_FAIL_MAX);
-
- /* Create two unrelated socketpairs */
- ret = qemu_socketpair(PF_LOCAL, SOCK_STREAM, 0, pair1);
- g_assert_cmpint(ret, ==, 0);
-
- ret = qemu_socketpair(PF_LOCAL, SOCK_STREAM, 0, pair2);
- g_assert_cmpint(ret, ==, 0);
-
- /*
- * Give the guests unpaired ends of the sockets, so they'll all blocked
- * at reading. This mimics a wrong channel established.
- */
- qtest_qmp_fds_assert_success(from, &pair1[0], 1,
- "{ 'execute': 'getfd',"
- " 'arguments': { 'fdname': 'fd-mig' }}");
- qtest_qmp_fds_assert_success(to, &pair2[0], 1,
- "{ 'execute': 'getfd',"
- " 'arguments': { 'fdname': 'fd-mig' }}");
-
- /*
- * Write the 1st byte as QEMU_VM_COMMAND (0x8) for the dest socket, to
- * emulate the 1st byte of a real recovery, but stops from there to
- * keep dest QEMU in RECOVER. This is needed so that we can kick off
- * the recover process on dest QEMU (by triggering the G_IO_IN event).
- *
- * NOTE: this trick is not needed on src QEMUs, because src doesn't
- * rely on an pre-existing G_IO_IN event, so it will always trigger the
- * upcoming recovery anyway even if it can read nothing.
- */
-#define QEMU_VM_COMMAND 0x08
- c = QEMU_VM_COMMAND;
- ret = send(pair2[1], &c, 1, 0);
- g_assert_cmpint(ret, ==, 1);
-
- if (stage == POSTCOPY_FAIL_CHANNEL_ESTABLISH) {
- /*
- * This will make src QEMU to fail at an early stage when trying to
- * resume later, where it shouldn't reach RECOVER stage at all.
- */
- close(pair1[1]);
- }
-
- migrate_recover(to, "fd:fd-mig");
- migrate_qmp(from, to, "fd:fd-mig", NULL, "{'resume': true}");
-
- /*
- * Source QEMU has an extra RECOVER_SETUP phase, dest doesn't have it.
- * Make sure it appears along the way.
- */
- migration_event_wait(from, "postcopy-recover-setup");
-
- if (fail_early) {
- /*
- * When fails at reconnection, src QEMU will automatically goes
- * back to PAUSED state. Making sure there is an event in this
- * case: Libvirt relies on this to detect early reconnection
- * errors.
- */
- migration_event_wait(from, "postcopy-paused");
- } else {
- /*
- * We want to test "fail later" at RECOVER stage here. Make sure
- * both QEMU instances will go into RECOVER stage first, then test
- * kicking them out using migrate-pause.
- *
- * Explicitly check the RECOVER event on src, that's what Libvirt
- * relies on, rather than polling.
- */
- migration_event_wait(from, "postcopy-recover");
- wait_for_postcopy_status(from, "postcopy-recover");
-
- /* Need an explicit kick on src QEMU in this case */
- migrate_pause(from);
- }
-
- /*
- * For all failure cases, we'll reach such states on both sides now.
- * Check them.
- */
- wait_for_postcopy_status(from, "postcopy-paused");
- wait_for_postcopy_status(to, "postcopy-recover");
-
- /*
- * Kick dest QEMU out too. This is normally not needed in reality
- * because when the channel is shutdown it should also happen on src.
- * However here we used separate socket pairs so we need to do that
- * explicitly.
- */
- migrate_pause(to);
- wait_for_postcopy_status(to, "postcopy-paused");
-
- close(pair1[0]);
- close(pair2[0]);
- close(pair2[1]);
-
- if (stage != POSTCOPY_FAIL_CHANNEL_ESTABLISH) {
- close(pair1[1]);
- }
-#endif
-}
-
-static void test_postcopy_recovery_common(MigrateCommon *args)
-{
- QTestState *from, *to;
- g_autofree char *uri = NULL;
-
- /* Always hide errors for postcopy recover tests since they're expected */
- args->start.hide_stderr = true;
-
- if (migrate_postcopy_prepare(&from, &to, args)) {
- return;
- }
-
- /* Turn postcopy speed down, 4K/s is slow enough on any machines */
- migrate_set_parameter_int(from, "max-postcopy-bandwidth", 4096);
-
- /* Now we start the postcopy */
- migrate_postcopy_start(from, to, &src_state);
-
- /*
- * Wait until postcopy is really started; we can only run the
- * migrate-pause command during a postcopy
- */
- wait_for_migration_status(from, "postcopy-active", NULL);
-
- /*
- * Manually stop the postcopy migration. This emulates a network
- * failure with the migration socket
- */
- migrate_pause(from);
-
- /*
- * Wait for destination side to reach postcopy-paused state. The
- * migrate-recover command can only succeed if destination machine
- * is in the paused state
- */
- wait_for_postcopy_status(to, "postcopy-paused");
- wait_for_postcopy_status(from, "postcopy-paused");
-
- if (args->postcopy_recovery_fail_stage) {
- /*
- * Test when a wrong socket specified for recover, and then the
- * ability to kick it out, and continue with a correct socket.
- */
- postcopy_recover_fail(from, to, args->postcopy_recovery_fail_stage);
- /* continue with a good recovery */
- }
-
- /*
- * Create a new socket to emulate a new channel that is different
- * from the broken migration channel; tell the destination to
- * listen to the new port
- */
- uri = g_strdup_printf("unix:%s/migsocket-recover", tmpfs);
- migrate_recover(to, uri);
-
- /*
- * Try to rebuild the migration channel using the resume flag and
- * the newly created channel
- */
- migrate_qmp(from, to, uri, NULL, "{'resume': true}");
-
- /* Restore the postcopy bandwidth to unlimited */
- migrate_set_parameter_int(from, "max-postcopy-bandwidth", 0);
-
- migrate_postcopy_complete(from, to, args);
-}
-
static void test_postcopy_recovery(void)
{
MigrateCommon args = { };
@@ -1383,218 +563,10 @@ static void test_analyze_script(void)
g_test_fail();
}
migrate_end(from, to, false);
- cleanup("migfile");
+ unlink(file);
}
#endif
-static void test_precopy_common(MigrateCommon *args)
-{
- QTestState *from, *to;
- void *data_hook = NULL;
-
- if (migrate_start(&from, &to, args->listen_uri, &args->start)) {
- return;
- }
-
- if (args->start_hook) {
- data_hook = args->start_hook(from, to);
- }
-
- /* Wait for the first serial output from the source */
- if (args->result == MIG_TEST_SUCCEED) {
- wait_for_serial("src_serial");
- wait_for_suspend(from, &src_state);
- }
-
- if (args->live) {
- migrate_ensure_non_converge(from);
- migrate_prepare_for_dirty_mem(from);
- } else {
- /*
- * Testing non-live migration, we allow it to run at
- * full speed to ensure short test case duration.
- * For tests expected to fail, we don't need to
- * change anything.
- */
- if (args->result == MIG_TEST_SUCCEED) {
- qtest_qmp_assert_success(from, "{ 'execute' : 'stop'}");
- wait_for_stop(from, &src_state);
- migrate_ensure_converge(from);
- }
- }
-
- if (args->result == MIG_TEST_QMP_ERROR) {
- migrate_qmp_fail(from, args->connect_uri, args->connect_channels, "{}");
- goto finish;
- }
-
- migrate_qmp(from, to, args->connect_uri, args->connect_channels, "{}");
-
- if (args->result != MIG_TEST_SUCCEED) {
- bool allow_active = args->result == MIG_TEST_FAIL;
- wait_for_migration_fail(from, allow_active);
-
- if (args->result == MIG_TEST_FAIL_DEST_QUIT_ERR) {
- qtest_set_expected_status(to, EXIT_FAILURE);
- }
- } else {
- if (args->live) {
- /*
- * For initial iteration(s) we must do a full pass,
- * but for the final iteration, we need only wait
- * for some dirty mem before switching to converge
- */
- while (args->iterations > 1) {
- wait_for_migration_pass(from, &src_state);
- args->iterations--;
- }
- migrate_wait_for_dirty_mem(from, to);
-
- migrate_ensure_converge(from);
-
- /*
- * We do this first, as it has a timeout to stop us
- * hanging forever if migration didn't converge
- */
- wait_for_migration_complete(from);
-
- wait_for_stop(from, &src_state);
-
- } else {
- wait_for_migration_complete(from);
- /*
- * Must wait for dst to finish reading all incoming
- * data on the socket before issuing 'cont' otherwise
- * it'll be ignored
- */
- wait_for_migration_complete(to);
-
- qtest_qmp_assert_success(to, "{ 'execute' : 'cont'}");
- }
-
- wait_for_resume(to, &dst_state);
-
- if (args->start.suspend_me) {
- /* wakeup succeeds only if guest is suspended */
- qtest_qmp_assert_success(to, "{'execute': 'system_wakeup'}");
- }
-
- wait_for_serial("dest_serial");
- }
-
-finish:
- if (args->end_hook) {
- args->end_hook(from, to, data_hook);
- }
-
- migrate_end(from, to, args->result == MIG_TEST_SUCCEED);
-}
-
-static void file_dirty_offset_region(void)
-{
- g_autofree char *path = g_strdup_printf("%s/%s", tmpfs, FILE_TEST_FILENAME);
- size_t size = FILE_TEST_OFFSET;
- g_autofree char *data = g_new0(char, size);
-
- memset(data, FILE_TEST_MARKER, size);
- g_assert(g_file_set_contents(path, data, size, NULL));
-}
-
-static void file_check_offset_region(void)
-{
- g_autofree char *path = g_strdup_printf("%s/%s", tmpfs, FILE_TEST_FILENAME);
- size_t size = FILE_TEST_OFFSET;
- g_autofree char *expected = g_new0(char, size);
- g_autofree char *actual = NULL;
- uint64_t *stream_start;
-
- /*
- * Ensure the skipped offset region's data has not been touched
- * and the migration stream starts at the right place.
- */
-
- memset(expected, FILE_TEST_MARKER, size);
-
- g_assert(g_file_get_contents(path, &actual, NULL, NULL));
- g_assert(!memcmp(actual, expected, size));
-
- stream_start = (uint64_t *)(actual + size);
- g_assert_cmpint(cpu_to_be64(*stream_start) >> 32, ==, QEMU_VM_FILE_MAGIC);
-}
-
-static void test_file_common(MigrateCommon *args, bool stop_src)
-{
- QTestState *from, *to;
- void *data_hook = NULL;
- bool check_offset = false;
-
- if (migrate_start(&from, &to, args->listen_uri, &args->start)) {
- return;
- }
-
- /*
- * File migration is never live. We can keep the source VM running
- * during migration, but the destination will not be running
- * concurrently.
- */
- g_assert_false(args->live);
-
- if (g_strrstr(args->connect_uri, "offset=")) {
- check_offset = true;
- /*
- * This comes before the start_hook because it's equivalent to
- * a management application creating the file and writing to
- * it so hooks should expect the file to be already present.
- */
- file_dirty_offset_region();
- }
-
- if (args->start_hook) {
- data_hook = args->start_hook(from, to);
- }
-
- migrate_ensure_converge(from);
- wait_for_serial("src_serial");
-
- if (stop_src) {
- qtest_qmp_assert_success(from, "{ 'execute' : 'stop'}");
- wait_for_stop(from, &src_state);
- }
-
- if (args->result == MIG_TEST_QMP_ERROR) {
- migrate_qmp_fail(from, args->connect_uri, NULL, "{}");
- goto finish;
- }
-
- migrate_qmp(from, to, args->connect_uri, NULL, "{}");
- wait_for_migration_complete(from);
-
- /*
- * We need to wait for the source to finish before starting the
- * destination.
- */
- migrate_incoming_qmp(to, args->connect_uri, "{}");
- wait_for_migration_complete(to);
-
- if (stop_src) {
- qtest_qmp_assert_success(to, "{ 'execute' : 'cont'}");
- }
- wait_for_resume(to, &dst_state);
-
- wait_for_serial("dest_serial");
-
- if (check_offset) {
- file_check_offset_region();
- }
-
-finish:
- if (args->end_hook) {
- args->end_hook(from, to, data_hook);
- }
-
- migrate_end(from, to, args->result == MIG_TEST_SUCCEED);
-}
-
static void test_precopy_unix_plain(void)
{
g_autofree char *uri = g_strdup_printf("unix:%s/migsocket", tmpfs);
@@ -1730,7 +702,7 @@ static void test_ignore_shared(void)
migrate_wait_for_dirty_mem(from, to);
- wait_for_stop(from, &src_state);
+ wait_for_stop(from, get_src());
qtest_qmp_eventwait(to, "RESUME");
@@ -2519,7 +1491,7 @@ static void test_auto_converge(void)
break;
}
usleep(20);
- g_assert_false(src_state.stop_seen);
+ g_assert_false(get_src()->stop_seen);
} while (true);
/* The first percentage of throttling should be at least init_pct */
g_assert_cmpint(percentage, >=, init_pct);
@@ -2575,26 +1547,6 @@ static void test_auto_converge(void)
migrate_end(from, to, true);
}
-static void *
-migrate_hook_start_precopy_tcp_multifd_common(QTestState *from,
- QTestState *to,
- const char *method)
-{
- migrate_set_parameter_int(from, "multifd-channels", 16);
- migrate_set_parameter_int(to, "multifd-channels", 16);
-
- migrate_set_parameter_str(from, "multifd-compression", method);
- migrate_set_parameter_str(to, "multifd-compression", method);
-
- migrate_set_capability(from, "multifd", true);
- migrate_set_capability(to, "multifd", true);
-
- /* Start incoming migration from the 1st socket */
- migrate_incoming_qmp(to, "tcp:127.0.0.1:0", "{}");
-
- return NULL;
-}
-
static void *
migrate_hook_start_precopy_tcp_multifd(QTestState *from,
QTestState *to)
@@ -3026,7 +1978,7 @@ static void test_multifd_tcp_cancel(void)
migrate_ensure_converge(from);
- wait_for_stop(from, &src_state);
+ wait_for_stop(from, get_src());
qtest_qmp_eventwait(to2, "RESUME");
wait_for_serial("dest_serial");
@@ -3171,6 +2123,7 @@ static QTestState *dirtylimit_start_vm(void)
{
QTestState *vm = NULL;
g_autofree gchar *cmd = NULL;
+ const char *bootpath;
bootpath = bootfile_create(qtest_get_arch(), tmpfs, false);
cmd = g_strdup_printf("-accel kvm,dirty-ring-size=4096 "
@@ -3186,8 +2139,10 @@ static QTestState *dirtylimit_start_vm(void)
static void dirtylimit_stop_vm(QTestState *vm)
{
+ g_autofree char *path = g_strdup_printf("%s/%s", tmpfs, "vm_serial");
+
qtest_quit(vm);
- cleanup("vm_serial");
+ unlink(path);
}
static void test_vcpu_dirty_limit(void)
@@ -3365,7 +2320,7 @@ static void test_dirty_limit(void)
read_migrate_property_int(from,
"dirty-limit-throttle-time-per-round");
usleep(100);
- g_assert_false(src_state.stop_seen);
+ g_assert_false(get_src()->stop_seen);
}
/* Now cancel migrate and wait for dirty limit throttle switch off */
@@ -3378,7 +2333,7 @@ static void test_dirty_limit(void)
read_migrate_property_int(from,
"dirty-limit-throttle-time-per-round");
usleep(100);
- g_assert_false(src_state.stop_seen);
+ g_assert_false(get_src()->stop_seen);
} while (throttle_us_per_full != 0 && --max_try_count);
/* Assert dirty limit is not in service */
@@ -3408,7 +2363,7 @@ static void test_dirty_limit(void)
read_migrate_property_int(from,
"dirty-limit-throttle-time-per-round");
usleep(100);
- g_assert_false(src_state.stop_seen);
+ g_assert_false(get_src()->stop_seen);
}
/*
@@ -3441,75 +2396,6 @@ static void test_dirty_limit(void)
migrate_end(from, to, true);
}
-MigrationTestEnv *migration_get_env(void)
-{
- static MigrationTestEnv *env;
- g_autoptr(GError) err = NULL;
-
- if (env) {
- return env;
- }
-
- env = g_new0(MigrationTestEnv, 1);
- env->qemu_src = getenv(QEMU_ENV_SRC);
- env->qemu_dst = getenv(QEMU_ENV_DST);
-
- /*
- * The default QTEST_QEMU_BINARY must always be provided because
- * that is what helpers use to query the accel type and
- * architecture.
- */
- if (env->qemu_src && env->qemu_dst) {
- g_test_message("Only one of %s, %s is allowed",
- QEMU_ENV_SRC, QEMU_ENV_DST);
- exit(1);
- }
-
- env->has_kvm = qtest_has_accel("kvm");
- env->has_tcg = qtest_has_accel("tcg");
-
- if (!env->has_tcg && !env->has_kvm) {
- g_test_skip("No KVM or TCG accelerator available");
- return env;
- }
-
- env->has_dirty_ring = kvm_dirty_ring_supported();
- env->has_uffd = ufd_version_check(&env->uffd_feature_thread_id);
- env->arch = qtest_get_arch();
- env->is_x86 = !strcmp(env->arch, "i386") || !strcmp(env->arch, "x86_64");
-
- env->tmpfs = g_dir_make_tmp("migration-test-XXXXXX", &err);
- if (!env->tmpfs) {
- g_test_message("Can't create temporary directory in %s: %s",
- g_get_tmp_dir(), err->message);
- }
- g_assert(env->tmpfs);
-
- return env;
-}
-
-static int migration_env_clean(MigrationTestEnv *env)
-{
- char *tmpfs;
- int ret = 0;
-
- if (!env) {
- return ret;
- }
-
- bootfile_delete();
-
- tmpfs = env->tmpfs;
- ret = rmdir(tmpfs);
- if (ret != 0) {
- g_test_message("unable to rmdir: path (%s): %s",
- tmpfs, strerror(errno));
- }
- g_free(tmpfs);
-
- return ret;
-}
-
int main(int argc, char **argv)
{
MigrationTestEnv *env;
@@ -34,7 +34,7 @@ void bootfile_delete(void)
bootpath = NULL;
}
-char *bootfile_create(const char *arch, char *dir, bool suspend_me)
+char *bootfile_create(const char *arch, const char *dir, bool suspend_me)
{
unsigned char *content;
size_t len;
@@ -34,6 +34,6 @@
#define ARM_TEST_MAX_KERNEL_SIZE (512 * 1024)
void bootfile_delete(void);
-char *bootfile_create(const char *arch, char *dir, bool suspend_me);
+char *bootfile_create(const char *arch, const char *dir, bool suspend_me);
#endif /* BOOTFILE_H */
new file mode 100644
@@ -0,0 +1,969 @@
+/*
+ * Copyright (c) 2016-2018 Red Hat, Inc. and/or its affiliates
+ * based on the vhost-user-test.c that is:
+ * Copyright (c) 2014 Virtual Open Systems Sarl.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#include "qemu/osdep.h"
+
+#include "chardev/char.h"
+#include "crypto/tlscredspsk.h"
+#include "libqtest.h"
+#include "migration/bootfile.h"
+#include "migration/test-framework.h"
+#include "migration/migration-qmp.h"
+#include "migration/migration-util.h"
+#include "ppc-util.h"
+#include "qapi/qmp/qlist.h"
+#include "qemu/module.h"
+#include "qemu/option.h"
+#include "qemu/range.h"
+#include "qemu/sockets.h"
+
+
+#define QEMU_VM_FILE_MAGIC 0x5145564d
+
+unsigned start_address;
+unsigned end_address;
+static QTestMigrationState src_state;
+static QTestMigrationState dst_state;
+static char *tmpfs;
+
+/*
+ * An initial 3 MB offset is used as that corresponds
+ * to ~1 sec of data transfer with our bandwidth setting.
+ */
+#define MAGIC_OFFSET_BASE (3 * 1024 * 1024)
+/*
+ * A further 1k is added to ensure we're not a multiple
+ * of TEST_MEM_PAGE_SIZE, thus avoid clash with writes
+ * from the migration guest workload.
+ */
+#define MAGIC_OFFSET_SHUFFLE 1024
+#define MAGIC_OFFSET (MAGIC_OFFSET_BASE + MAGIC_OFFSET_SHUFFLE)
+#define MAGIC_MARKER 0xFEED12345678CAFEULL
+
+
+/*
+ * Wait for some output in the serial output file,
+ * we get an 'A' followed by an endless string of 'B's
+ * but on the destination we won't have the A (unless we enabled suspend/resume)
+ */
+void wait_for_serial(const char *side)
+{
+ g_autofree char *serialpath = g_strdup_printf("%s/%s", tmpfs, side);
+ FILE *serialfile = fopen(serialpath, "r");
+
+ do {
+ int readvalue = fgetc(serialfile);
+
+ switch (readvalue) {
+ case 'A':
+ /* Fine */
+ break;
+
+ case 'B':
+ /* It's alive! */
+ fclose(serialfile);
+ return;
+
+ case EOF:
+ fseek(serialfile, 0, SEEK_SET);
+ usleep(1000);
+ break;
+
+ default:
+ fprintf(stderr, "Unexpected %d on %s serial\n", readvalue, side);
+ g_assert_not_reached();
+ }
+ } while (true);
+}
+
+void migrate_prepare_for_dirty_mem(QTestState *from)
+{
+ /*
+ * The guest workflow iterates from start_address to
+ * end_address, writing 1 byte every TEST_MEM_PAGE_SIZE
+ * bytes.
+ *
+ * IOW, if we write to mem at a point which is NOT
+ * a multiple of TEST_MEM_PAGE_SIZE, our write won't
+ * conflict with the migration workflow.
+ *
+ * We put in a marker here, that we'll use to determine
+ * when the data has been transferred to the dst.
+ */
+ qtest_writeq(from, start_address + MAGIC_OFFSET, MAGIC_MARKER);
+}
+
+void migrate_wait_for_dirty_mem(QTestState *from, QTestState *to)
+{
+ uint64_t watch_address = start_address + MAGIC_OFFSET_BASE;
+ uint64_t marker_address = start_address + MAGIC_OFFSET;
+ uint8_t watch_byte;
+
+ /*
+ * Wait for the MAGIC_MARKER to get transferred, as an
+ * indicator that a migration pass has made some known
+ * amount of progress.
+ */
+ do {
+ usleep(1000 * 10);
+ } while (qtest_readq(to, marker_address) != MAGIC_MARKER);
+
+
+ /* If suspended, src only iterates once, and watch_byte may never change */
+ if (src_state.suspend_me) {
+ return;
+ }
+
+ /*
+ * Now ensure that already transferred bytes are
+ * dirty again from the guest workload. Note the
+ * guest byte value will wrap around and by chance
+ * match the original watch_byte. This is harmless
+ * as we'll eventually see a different value if we
+ * keep watching
+ */
+ watch_byte = qtest_readb(from, watch_address);
+ do {
+ usleep(1000 * 10);
+ } while (qtest_readb(from, watch_address) == watch_byte);
+}
+
+static void check_guests_ram(QTestState *who)
+{
+ /*
+ * Our ASM test will have been incrementing one byte from each page from
+ * start_address to < end_address in order. This gives us a constraint
+ * that any page's byte should be equal or less than the previous pages
+ * byte (mod 256); and they should all be equal except for one transition
+ * at the point where we meet the incrementer. (We're running this with
+ * the guest stopped).
+ */
+ unsigned address;
+ uint8_t first_byte;
+ uint8_t last_byte;
+ bool hit_edge = false;
+ int bad = 0;
+
+ qtest_memread(who, start_address, &first_byte, 1);
+ last_byte = first_byte;
+
+ for (address = start_address + TEST_MEM_PAGE_SIZE; address < end_address;
+ address += TEST_MEM_PAGE_SIZE)
+ {
+ uint8_t b;
+ qtest_memread(who, address, &b, 1);
+ if (b != last_byte) {
+ if (((b + 1) % 256) == last_byte && !hit_edge) {
+ /*
+ * This is OK, the guest stopped at the point of
+ * incrementing the previous page but didn't get
+ * to us yet.
+ */
+ hit_edge = true;
+ last_byte = b;
+ } else {
+ bad++;
+ if (bad <= 10) {
+ fprintf(stderr, "Memory content inconsistency at %x"
+ " first_byte = %x last_byte = %x current = %x"
+ " hit_edge = %x\n",
+ address, first_byte, last_byte, b, hit_edge);
+ }
+ }
+ }
+ }
+ if (bad >= 10) {
+ fprintf(stderr, "and in another %d pages", bad - 10);
+ }
+ g_assert(bad == 0);
+}
+
+static void cleanup(const char *filename)
+{
+ g_autofree char *path = g_strdup_printf("%s/%s", tmpfs, filename);
+
+ unlink(path);
+}
+
+int migrate_start(QTestState **from, QTestState **to, const char *uri,
+ MigrateStart *args)
+{
+ g_autofree gchar *arch_source = NULL;
+ g_autofree gchar *arch_target = NULL;
+ /* options for source and target */
+ g_autofree gchar *arch_opts = NULL;
+ g_autofree gchar *cmd_source = NULL;
+ g_autofree gchar *cmd_target = NULL;
+ const gchar *ignore_stderr;
+ g_autofree char *shmem_opts = NULL;
+ g_autofree char *shmem_path = NULL;
+ const char *kvm_opts = NULL;
+ const char *arch = qtest_get_arch();
+ const char *memory_size;
+ const char *machine_alias, *machine_opts = "";
+ g_autofree char *machine = NULL;
+ const char *bootpath;
+
+ if (args->use_shmem) {
+ if (!g_file_test("/dev/shm", G_FILE_TEST_IS_DIR)) {
+ g_test_skip("/dev/shm is not supported");
+ return -1;
+ }
+ }
+
+ dst_state = (QTestMigrationState) { };
+ src_state = (QTestMigrationState) { };
+ bootpath = bootfile_create(arch, tmpfs, args->suspend_me);
+ src_state.suspend_me = args->suspend_me;
+
+ if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
+ memory_size = "150M";
+
+ if (g_str_equal(arch, "i386")) {
+ machine_alias = "pc";
+ } else {
+ machine_alias = "q35";
+ }
+ arch_opts = g_strdup_printf(
+ "-drive if=none,id=d0,file=%s,format=raw "
+ "-device ide-hd,drive=d0,secs=1,cyls=1,heads=1", bootpath);
+ start_address = X86_TEST_MEM_START;
+ end_address = X86_TEST_MEM_END;
+ } else if (g_str_equal(arch, "s390x")) {
+ memory_size = "128M";
+ machine_alias = "s390-ccw-virtio";
+ arch_opts = g_strdup_printf("-bios %s", bootpath);
+ start_address = S390_TEST_MEM_START;
+ end_address = S390_TEST_MEM_END;
+ } else if (strcmp(arch, "ppc64") == 0) {
+ memory_size = "256M";
+ start_address = PPC_TEST_MEM_START;
+ end_address = PPC_TEST_MEM_END;
+ machine_alias = "pseries";
+ machine_opts = "vsmt=8";
+ arch_opts = g_strdup_printf(
+ "-nodefaults -machine " PSERIES_DEFAULT_CAPABILITIES " "
+ "-bios %s", bootpath);
+ } else if (strcmp(arch, "aarch64") == 0) {
+ memory_size = "150M";
+ machine_alias = "virt";
+ machine_opts = "gic-version=3";
+ arch_opts = g_strdup_printf("-cpu max -kernel %s", bootpath);
+ start_address = ARM_TEST_MEM_START;
+ end_address = ARM_TEST_MEM_END;
+ } else {
+ g_assert_not_reached();
+ }
+
+ if (!getenv("QTEST_LOG") && args->hide_stderr) {
+#ifndef _WIN32
+ ignore_stderr = "2>/dev/null";
+#else
+ /*
+ * On Windows the QEMU executable is created via CreateProcess() and
+ * IO redirection does not work, so don't bother adding IO redirection
+ * to the command line.
+ */
+ ignore_stderr = "";
+#endif
+ } else {
+ ignore_stderr = "";
+ }
+
+ if (args->use_shmem) {
+ shmem_path = g_strdup_printf("/dev/shm/qemu-%d", getpid());
+ shmem_opts = g_strdup_printf(
+ "-object memory-backend-file,id=mem0,size=%s"
+ ",mem-path=%s,share=on -numa node,memdev=mem0",
+ memory_size, shmem_path);
+ }
+
+ if (args->use_dirty_ring) {
+ kvm_opts = ",dirty-ring-size=4096";
+ }
+
+ if (!qtest_has_machine(machine_alias)) {
+ g_autofree char *msg = g_strdup_printf("machine %s not supported", machine_alias);
+ g_test_skip(msg);
+ return -1;
+ }
+
+ machine = resolve_machine_version(machine_alias, QEMU_ENV_SRC,
+ QEMU_ENV_DST);
+
+ g_test_message("Using machine type: %s", machine);
+
+ cmd_source = g_strdup_printf("-accel kvm%s -accel tcg "
+ "-machine %s,%s "
+ "-name source,debug-threads=on "
+ "-m %s "
+ "-serial file:%s/src_serial "
+ "%s %s %s %s %s",
+ kvm_opts ? kvm_opts : "",
+ machine, machine_opts,
+ memory_size, tmpfs,
+ arch_opts ? arch_opts : "",
+ arch_source ? arch_source : "",
+ shmem_opts ? shmem_opts : "",
+ args->opts_source ? args->opts_source : "",
+ ignore_stderr);
+ if (!args->only_target) {
+ *from = qtest_init_with_env(QEMU_ENV_SRC, cmd_source);
+ qtest_qmp_set_event_callback(*from,
+ migrate_watch_for_events,
+ &src_state);
+ }
+
+ cmd_target = g_strdup_printf("-accel kvm%s -accel tcg "
+ "-machine %s,%s "
+ "-name target,debug-threads=on "
+ "-m %s "
+ "-serial file:%s/dest_serial "
+ "-incoming %s "
+ "%s %s %s %s %s",
+ kvm_opts ? kvm_opts : "",
+ machine, machine_opts,
+ memory_size, tmpfs, uri,
+ arch_opts ? arch_opts : "",
+ arch_target ? arch_target : "",
+ shmem_opts ? shmem_opts : "",
+ args->opts_target ? args->opts_target : "",
+ ignore_stderr);
+ *to = qtest_init_with_env(QEMU_ENV_DST, cmd_target);
+ qtest_qmp_set_event_callback(*to,
+ migrate_watch_for_events,
+ &dst_state);
+
+ /*
+ * Remove shmem file immediately to avoid memory leak in test failed case.
+ * It's valid because QEMU has already opened this file
+ */
+ if (args->use_shmem) {
+ unlink(shmem_path);
+ }
+
+ /*
+ * Always enable migration events. Libvirt always uses it, let's try
+ * to mimic as closer as that.
+ */
+ migrate_set_capability(*from, "events", true);
+ migrate_set_capability(*to, "events", true);
+
+ return 0;
+}
+
+void migrate_end(QTestState *from, QTestState *to, bool test_dest)
+{
+ unsigned char dest_byte_a, dest_byte_b, dest_byte_c, dest_byte_d;
+
+ qtest_quit(from);
+
+ if (test_dest) {
+ qtest_memread(to, start_address, &dest_byte_a, 1);
+
+ /* Destination still running, wait for a byte to change */
+ do {
+ qtest_memread(to, start_address, &dest_byte_b, 1);
+ usleep(1000 * 10);
+ } while (dest_byte_a == dest_byte_b);
+
+ qtest_qmp_assert_success(to, "{ 'execute' : 'stop'}");
+
+ /* With it stopped, check nothing changes */
+ qtest_memread(to, start_address, &dest_byte_c, 1);
+ usleep(1000 * 200);
+ qtest_memread(to, start_address, &dest_byte_d, 1);
+ g_assert_cmpint(dest_byte_c, ==, dest_byte_d);
+
+ check_guests_ram(to);
+ }
+
+ qtest_quit(to);
+
+ cleanup("migsocket");
+ cleanup("src_serial");
+ cleanup("dest_serial");
+ cleanup(FILE_TEST_FILENAME);
+}
+
+static int migrate_postcopy_prepare(QTestState **from_ptr,
+ QTestState **to_ptr,
+ MigrateCommon *args)
+{
+ QTestState *from, *to;
+
+ if (migrate_start(&from, &to, "defer", &args->start)) {
+ return -1;
+ }
+
+ if (args->start_hook) {
+ args->postcopy_data = args->start_hook(from, to);
+ }
+
+ migrate_set_capability(from, "postcopy-ram", true);
+ migrate_set_capability(to, "postcopy-ram", true);
+ migrate_set_capability(to, "postcopy-blocktime", true);
+
+ if (args->postcopy_preempt) {
+ migrate_set_capability(from, "postcopy-preempt", true);
+ migrate_set_capability(to, "postcopy-preempt", true);
+ }
+
+ migrate_ensure_non_converge(from);
+
+ migrate_prepare_for_dirty_mem(from);
+ qtest_qmp_assert_success(to, "{ 'execute': 'migrate-incoming',"
+ " 'arguments': { "
+ " 'channels': [ { 'channel-type': 'main',"
+ " 'addr': { 'transport': 'socket',"
+ " 'type': 'inet',"
+ " 'host': '127.0.0.1',"
+ " 'port': '0' } } ] } }");
+
+ /* Wait for the first serial output from the source */
+ wait_for_serial("src_serial");
+ wait_for_suspend(from, &src_state);
+
+ migrate_qmp(from, to, NULL, NULL, "{}");
+
+ migrate_wait_for_dirty_mem(from, to);
+
+ *from_ptr = from;
+ *to_ptr = to;
+
+ return 0;
+}
+
+static void migrate_postcopy_complete(QTestState *from, QTestState *to,
+ MigrateCommon *args)
+{
+ MigrationTestEnv *env = migration_get_env();
+
+ wait_for_migration_complete(from);
+
+ if (args->start.suspend_me) {
+ /* wakeup succeeds only if guest is suspended */
+ qtest_qmp_assert_success(to, "{'execute': 'system_wakeup'}");
+ }
+
+ /* Make sure we get at least one "B" on destination */
+ wait_for_serial("dest_serial");
+
+ if (env->uffd_feature_thread_id) {
+ read_blocktime(to);
+ }
+
+ if (args->end_hook) {
+ args->end_hook(from, to, args->postcopy_data);
+ args->postcopy_data = NULL;
+ }
+
+ migrate_end(from, to, true);
+}
+
+void test_postcopy_common(MigrateCommon *args)
+{
+ QTestState *from, *to;
+
+ if (migrate_postcopy_prepare(&from, &to, args)) {
+ return;
+ }
+ migrate_postcopy_start(from, to, &src_state);
+ migrate_postcopy_complete(from, to, args);
+}
+
+static void wait_for_postcopy_status(QTestState *one, const char *status)
+{
+ wait_for_migration_status(one, status,
+ (const char * []) {
+ "failed", "active",
+ "completed", NULL
+ });
+}
+
+static void postcopy_recover_fail(QTestState *from, QTestState *to,
+ PostcopyRecoveryFailStage stage)
+{
+#ifndef _WIN32
+ bool fail_early = (stage == POSTCOPY_FAIL_CHANNEL_ESTABLISH);
+ int ret, pair1[2], pair2[2];
+ char c;
+
+ g_assert(stage > POSTCOPY_FAIL_NONE && stage < POSTCOPY_FAIL_MAX);
+
+ /* Create two unrelated socketpairs */
+ ret = qemu_socketpair(PF_LOCAL, SOCK_STREAM, 0, pair1);
+ g_assert_cmpint(ret, ==, 0);
+
+ ret = qemu_socketpair(PF_LOCAL, SOCK_STREAM, 0, pair2);
+ g_assert_cmpint(ret, ==, 0);
+
+ /*
+ * Give the guests unpaired ends of the sockets, so they'll all blocked
+ * at reading. This mimics a wrong channel established.
+ */
+ qtest_qmp_fds_assert_success(from, &pair1[0], 1,
+ "{ 'execute': 'getfd',"
+ " 'arguments': { 'fdname': 'fd-mig' }}");
+ qtest_qmp_fds_assert_success(to, &pair2[0], 1,
+ "{ 'execute': 'getfd',"
+ " 'arguments': { 'fdname': 'fd-mig' }}");
+
+ /*
+ * Write the 1st byte as QEMU_VM_COMMAND (0x8) for the dest socket, to
+ * emulate the 1st byte of a real recovery, but stops from there to
+ * keep dest QEMU in RECOVER. This is needed so that we can kick off
+ * the recover process on dest QEMU (by triggering the G_IO_IN event).
+ *
+ * NOTE: this trick is not needed on src QEMUs, because src doesn't
+ * rely on an pre-existing G_IO_IN event, so it will always trigger the
+ * upcoming recovery anyway even if it can read nothing.
+ */
+#define QEMU_VM_COMMAND 0x08
+ c = QEMU_VM_COMMAND;
+ ret = send(pair2[1], &c, 1, 0);
+ g_assert_cmpint(ret, ==, 1);
+
+ if (stage == POSTCOPY_FAIL_CHANNEL_ESTABLISH) {
+ /*
+ * This will make src QEMU to fail at an early stage when trying to
+ * resume later, where it shouldn't reach RECOVER stage at all.
+ */
+ close(pair1[1]);
+ }
+
+ migrate_recover(to, "fd:fd-mig");
+ migrate_qmp(from, to, "fd:fd-mig", NULL, "{'resume': true}");
+
+ /*
+ * Source QEMU has an extra RECOVER_SETUP phase, dest doesn't have it.
+ * Make sure it appears along the way.
+ */
+ migration_event_wait(from, "postcopy-recover-setup");
+
+ if (fail_early) {
+ /*
+ * When fails at reconnection, src QEMU will automatically goes
+ * back to PAUSED state. Making sure there is an event in this
+ * case: Libvirt relies on this to detect early reconnection
+ * errors.
+ */
+ migration_event_wait(from, "postcopy-paused");
+ } else {
+ /*
+ * We want to test "fail later" at RECOVER stage here. Make sure
+ * both QEMU instances will go into RECOVER stage first, then test
+ * kicking them out using migrate-pause.
+ *
+ * Explicitly check the RECOVER event on src, that's what Libvirt
+ * relies on, rather than polling.
+ */
+ migration_event_wait(from, "postcopy-recover");
+ wait_for_postcopy_status(from, "postcopy-recover");
+
+ /* Need an explicit kick on src QEMU in this case */
+ migrate_pause(from);
+ }
+
+ /*
+ * For all failure cases, we'll reach such states on both sides now.
+ * Check them.
+ */
+ wait_for_postcopy_status(from, "postcopy-paused");
+ wait_for_postcopy_status(to, "postcopy-recover");
+
+ /*
+ * Kick dest QEMU out too. This is normally not needed in reality
+ * because when the channel is shutdown it should also happen on src.
+ * However here we used separate socket pairs so we need to do that
+ * explicitly.
+ */
+ migrate_pause(to);
+ wait_for_postcopy_status(to, "postcopy-paused");
+
+ close(pair1[0]);
+ close(pair2[0]);
+ close(pair2[1]);
+
+ if (stage != POSTCOPY_FAIL_CHANNEL_ESTABLISH) {
+ close(pair1[1]);
+ }
+#endif
+}
+
+void test_postcopy_recovery_common(MigrateCommon *args)
+{
+ QTestState *from, *to;
+ g_autofree char *uri = NULL;
+
+ /* Always hide errors for postcopy recover tests since they're expected */
+ args->start.hide_stderr = true;
+
+ if (migrate_postcopy_prepare(&from, &to, args)) {
+ return;
+ }
+
+ /* Turn postcopy speed down, 4K/s is slow enough on any machines */
+ migrate_set_parameter_int(from, "max-postcopy-bandwidth", 4096);
+
+ /* Now we start the postcopy */
+ migrate_postcopy_start(from, to, &src_state);
+
+ /*
+ * Wait until postcopy is really started; we can only run the
+ * migrate-pause command during a postcopy
+ */
+ wait_for_migration_status(from, "postcopy-active", NULL);
+
+ /*
+ * Manually stop the postcopy migration. This emulates a network
+ * failure with the migration socket
+ */
+ migrate_pause(from);
+
+ /*
+ * Wait for destination side to reach postcopy-paused state. The
+ * migrate-recover command can only succeed if destination machine
+ * is in the paused state
+ */
+ wait_for_postcopy_status(to, "postcopy-paused");
+ wait_for_postcopy_status(from, "postcopy-paused");
+
+ if (args->postcopy_recovery_fail_stage) {
+ /*
+ * Test when a wrong socket specified for recover, and then the
+ * ability to kick it out, and continue with a correct socket.
+ */
+ postcopy_recover_fail(from, to, args->postcopy_recovery_fail_stage);
+ /* continue with a good recovery */
+ }
+
+ /*
+ * Create a new socket to emulate a new channel that is different
+ * from the broken migration channel; tell the destination to
+ * listen to the new port
+ */
+ uri = g_strdup_printf("unix:%s/migsocket-recover", tmpfs);
+ migrate_recover(to, uri);
+
+ /*
+ * Try to rebuild the migration channel using the resume flag and
+ * the newly created channel
+ */
+ migrate_qmp(from, to, uri, NULL, "{'resume': true}");
+
+ /* Restore the postcopy bandwidth to unlimited */
+ migrate_set_parameter_int(from, "max-postcopy-bandwidth", 0);
+
+ migrate_postcopy_complete(from, to, args);
+}
+
+void test_precopy_common(MigrateCommon *args)
+{
+ QTestState *from, *to;
+ void *data_hook = NULL;
+
+ if (migrate_start(&from, &to, args->listen_uri, &args->start)) {
+ return;
+ }
+
+ if (args->start_hook) {
+ data_hook = args->start_hook(from, to);
+ }
+
+ /* Wait for the first serial output from the source */
+ if (args->result == MIG_TEST_SUCCEED) {
+ wait_for_serial("src_serial");
+ wait_for_suspend(from, &src_state);
+ }
+
+ if (args->live) {
+ migrate_ensure_non_converge(from);
+ migrate_prepare_for_dirty_mem(from);
+ } else {
+ /*
+ * Testing non-live migration, we allow it to run at
+ * full speed to ensure short test case duration.
+ * For tests expected to fail, we don't need to
+ * change anything.
+ */
+ if (args->result == MIG_TEST_SUCCEED) {
+ qtest_qmp_assert_success(from, "{ 'execute' : 'stop'}");
+ wait_for_stop(from, &src_state);
+ migrate_ensure_converge(from);
+ }
+ }
+
+ if (args->result == MIG_TEST_QMP_ERROR) {
+ migrate_qmp_fail(from, args->connect_uri, args->connect_channels, "{}");
+ goto finish;
+ }
+
+ migrate_qmp(from, to, args->connect_uri, args->connect_channels, "{}");
+
+ if (args->result != MIG_TEST_SUCCEED) {
+ bool allow_active = args->result == MIG_TEST_FAIL;
+ wait_for_migration_fail(from, allow_active);
+
+ if (args->result == MIG_TEST_FAIL_DEST_QUIT_ERR) {
+ qtest_set_expected_status(to, EXIT_FAILURE);
+ }
+ } else {
+ if (args->live) {
+ /*
+ * For initial iteration(s) we must do a full pass,
+ * but for the final iteration, we need only wait
+ * for some dirty mem before switching to converge
+ */
+ while (args->iterations > 1) {
+ wait_for_migration_pass(from, &src_state);
+ args->iterations--;
+ }
+ migrate_wait_for_dirty_mem(from, to);
+
+ migrate_ensure_converge(from);
+
+ /*
+ * We do this first, as it has a timeout to stop us
+ * hanging forever if migration didn't converge
+ */
+ wait_for_migration_complete(from);
+
+ wait_for_stop(from, &src_state);
+
+ } else {
+ wait_for_migration_complete(from);
+ /*
+ * Must wait for dst to finish reading all incoming
+ * data on the socket before issuing 'cont' otherwise
+ * it'll be ignored
+ */
+ wait_for_migration_complete(to);
+
+ qtest_qmp_assert_success(to, "{ 'execute' : 'cont'}");
+ }
+
+ wait_for_resume(to, &dst_state);
+
+ if (args->start.suspend_me) {
+ /* wakeup succeeds only if guest is suspended */
+ qtest_qmp_assert_success(to, "{'execute': 'system_wakeup'}");
+ }
+
+ wait_for_serial("dest_serial");
+ }
+
+finish:
+ if (args->end_hook) {
+ args->end_hook(from, to, data_hook);
+ }
+
+ migrate_end(from, to, args->result == MIG_TEST_SUCCEED);
+}
+
+static void file_dirty_offset_region(void)
+{
+ g_autofree char *path = g_strdup_printf("%s/%s", tmpfs, FILE_TEST_FILENAME);
+ size_t size = FILE_TEST_OFFSET;
+ g_autofree char *data = g_new0(char, size);
+
+ memset(data, FILE_TEST_MARKER, size);
+ g_assert(g_file_set_contents(path, data, size, NULL));
+}
+
+static void file_check_offset_region(void)
+{
+ g_autofree char *path = g_strdup_printf("%s/%s", tmpfs, FILE_TEST_FILENAME);
+ size_t size = FILE_TEST_OFFSET;
+ g_autofree char *expected = g_new0(char, size);
+ g_autofree char *actual = NULL;
+ uint64_t *stream_start;
+
+ /*
+ * Ensure the skipped offset region's data has not been touched
+ * and the migration stream starts at the right place.
+ */
+
+ memset(expected, FILE_TEST_MARKER, size);
+
+ g_assert(g_file_get_contents(path, &actual, NULL, NULL));
+ g_assert(!memcmp(actual, expected, size));
+
+ stream_start = (uint64_t *)(actual + size);
+ g_assert_cmpint(cpu_to_be64(*stream_start) >> 32, ==, QEMU_VM_FILE_MAGIC);
+}
+
+void test_file_common(MigrateCommon *args, bool stop_src)
+{
+ QTestState *from, *to;
+ void *data_hook = NULL;
+ bool check_offset = false;
+
+ if (migrate_start(&from, &to, args->listen_uri, &args->start)) {
+ return;
+ }
+
+ /*
+ * File migration is never live. We can keep the source VM running
+ * during migration, but the destination will not be running
+ * concurrently.
+ */
+ g_assert_false(args->live);
+
+ if (g_strrstr(args->connect_uri, "offset=")) {
+ check_offset = true;
+ /*
+ * This comes before the start_hook because it's equivalent to
+ * a management application creating the file and writing to
+ * it so hooks should expect the file to be already present.
+ */
+ file_dirty_offset_region();
+ }
+
+ if (args->start_hook) {
+ data_hook = args->start_hook(from, to);
+ }
+
+ migrate_ensure_converge(from);
+ wait_for_serial("src_serial");
+
+ if (stop_src) {
+ qtest_qmp_assert_success(from, "{ 'execute' : 'stop'}");
+ wait_for_stop(from, &src_state);
+ }
+
+ if (args->result == MIG_TEST_QMP_ERROR) {
+ migrate_qmp_fail(from, args->connect_uri, NULL, "{}");
+ goto finish;
+ }
+
+ migrate_qmp(from, to, args->connect_uri, NULL, "{}");
+ wait_for_migration_complete(from);
+
+ /*
+ * We need to wait for the source to finish before starting the
+ * destination.
+ */
+ migrate_incoming_qmp(to, args->connect_uri, "{}");
+ wait_for_migration_complete(to);
+
+ if (stop_src) {
+ qtest_qmp_assert_success(to, "{ 'execute' : 'cont'}");
+ }
+ wait_for_resume(to, &dst_state);
+
+ wait_for_serial("dest_serial");
+
+ if (check_offset) {
+ file_check_offset_region();
+ }
+
+finish:
+ if (args->end_hook) {
+ args->end_hook(from, to, data_hook);
+ }
+
+ migrate_end(from, to, args->result == MIG_TEST_SUCCEED);
+}
+
+void *migrate_hook_start_precopy_tcp_multifd_common(QTestState *from,
+ QTestState *to,
+ const char *method)
+{
+ migrate_set_parameter_int(from, "multifd-channels", 16);
+ migrate_set_parameter_int(to, "multifd-channels", 16);
+
+ migrate_set_parameter_str(from, "multifd-compression", method);
+ migrate_set_parameter_str(to, "multifd-compression", method);
+
+ migrate_set_capability(from, "multifd", true);
+ migrate_set_capability(to, "multifd", true);
+
+ /* Start incoming migration from the 1st socket */
+ migrate_incoming_qmp(to, "tcp:127.0.0.1:0", "{}");
+
+ return NULL;
+}
+
+QTestMigrationState *get_src(void)
+{
+ return &src_state;
+}
+
+MigrationTestEnv *migration_get_env(void)
+{
+ static MigrationTestEnv *env;
+ g_autoptr(GError) err = NULL;
+
+ if (env) {
+ return env;
+ }
+
+ env = g_new0(MigrationTestEnv, 1);
+ env->qemu_src = getenv(QEMU_ENV_SRC);
+ env->qemu_dst = getenv(QEMU_ENV_DST);
+
+ /*
+ * The default QTEST_QEMU_BINARY must always be provided because
+ * that is what helpers use to query the accel type and
+ * architecture.
+ */
+ if (env->qemu_src && env->qemu_dst) {
+ g_test_message("Only one of %s, %s is allowed",
+ QEMU_ENV_SRC, QEMU_ENV_DST);
+ exit(1);
+ }
+
+ env->has_kvm = qtest_has_accel("kvm");
+ env->has_tcg = qtest_has_accel("tcg");
+
+ if (!env->has_tcg && !env->has_kvm) {
+ g_test_skip("No KVM or TCG accelerator available");
+ return env;
+ }
+
+ env->has_dirty_ring = kvm_dirty_ring_supported();
+ env->has_uffd = ufd_version_check(&env->uffd_feature_thread_id);
+ env->arch = qtest_get_arch();
+ env->is_x86 = !strcmp(env->arch, "i386") || !strcmp(env->arch, "x86_64");
+
+ env->tmpfs = g_dir_make_tmp("migration-test-XXXXXX", &err);
+ if (!env->tmpfs) {
+ g_test_message("Can't create temporary directory in %s: %s",
+ g_get_tmp_dir(), err->message);
+ }
+ g_assert(env->tmpfs);
+
+ tmpfs = env->tmpfs;
+
+ return env;
+}
+
+int migration_env_clean(MigrationTestEnv *env)
+{
+ char *tmpfs;
+ int ret = 0;
+
+ if (!env) {
+ return ret;
+ }
+
+ bootfile_delete();
+
+ tmpfs = env->tmpfs;
+ ret = rmdir(tmpfs);
+ if (ret != 0) {
+ g_test_message("unable to rmdir: path (%s): %s",
+ tmpfs, strerror(errno));
+ }
+ g_free(tmpfs);
+
+ return ret;
+}
new file mode 100644
@@ -0,0 +1,216 @@
+/*
+ * Copyright (c) 2016-2018 Red Hat, Inc. and/or its affiliates
+ * based on the vhost-user-test.c that is:
+ * Copyright (c) 2014 Virtual Open Systems Sarl.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or later.
+ * See the COPYING file in the top-level directory.
+ *
+ */
+
+#ifndef TEST_FRAMEWORK_H
+#define TEST_FRAMEWORK_H
+
+#define FILE_TEST_FILENAME "migfile"
+#define FILE_TEST_OFFSET 0x1000
+#define FILE_TEST_MARKER 'X'
+
+typedef struct MigrationTestEnv {
+ bool has_kvm;
+ bool has_tcg;
+ bool has_uffd;
+ bool uffd_feature_thread_id;
+ bool has_dirty_ring;
+ bool is_x86;
+ const char *arch;
+ const char *qemu_src;
+ const char *qemu_dst;
+ char *tmpfs;
+} MigrationTestEnv;
+
+MigrationTestEnv *migration_get_env(void);
+int migration_env_clean(MigrationTestEnv *env);
+
+/*
+ * A hook that runs after the src and dst QEMUs have been
+ * created, but before the migration is started. This can
+ * be used to set migration parameters and capabilities.
+ *
+ * Returns: NULL, or a pointer to opaque state to be
+ * later passed to the TestMigrateEndHook
+ */
+typedef void * (*TestMigrateStartHook)(QTestState *from,
+ QTestState *to);
+
+/*
+ * A hook that runs after the migration has finished,
+ * regardless of whether it succeeded or failed, but
+ * before QEMU has terminated (unless it self-terminated
+ * due to migration error)
+ *
+ * @opaque is a pointer to state previously returned
+ * by the TestMigrateStartHook if any, or NULL.
+ */
+typedef void (*TestMigrateEndHook)(QTestState *from,
+ QTestState *to,
+ void *opaque);
+
+/*
+ * Our goal is to ensure that we run a single full migration
+ * iteration, and also dirty memory, ensuring that at least
+ * one further iteration is required.
+ *
+ * We can't directly synchronize with the start of a migration
+ * so we have to apply some tricks monitoring memory that is
+ * transferred.
+ *
+ * Initially we set the migration bandwidth to an insanely
+ * low value, with tiny max downtime too. This basically
+ * guarantees migration will never complete.
+ *
+ * This will result in a test that is unacceptably slow though,
+ * so we can't let the entire migration pass run at this speed.
+ * Our intent is to let it run just long enough that we can
+ * prove data prior to the marker has been transferred *AND*
+ * also prove this transferred data is dirty again.
+ *
+ * Before migration starts, we write a 64-bit magic marker
+ * into a fixed location in the src VM RAM.
+ *
+ * Then watch dst memory until the marker appears. This is
+ * proof that start_address -> MAGIC_OFFSET_BASE has been
+ * transferred.
+ *
+ * Finally we go back to the source and read a byte just
+ * before the marker until we see it flip in value. This
+ * is proof that start_address -> MAGIC_OFFSET_BASE
+ * is now dirty again.
+ *
+ * IOW, we're guaranteed at least a 2nd migration pass
+ * at this point.
+ *
+ * We can now let migration run at full speed to finish
+ * the test
+ */
+typedef struct {
+ /*
+ * QTEST_LOG=1 may override this. When QTEST_LOG=1, we always dump errors
+ * unconditionally, because it means the user would like to be verbose.
+ */
+ bool hide_stderr;
+ bool use_shmem;
+ /* only launch the target process */
+ bool only_target;
+ /* Use dirty ring if true; dirty logging otherwise */
+ bool use_dirty_ring;
+ const char *opts_source;
+ const char *opts_target;
+ /* suspend the src before migrating to dest. */
+ bool suspend_me;
+} MigrateStart;
+
+typedef enum PostcopyRecoveryFailStage {
+ /*
+ * "no failure" must be 0 as it's the default. OTOH, real failure
+ * cases must be >0 to make sure they trigger by a "if" test.
+ */
+ POSTCOPY_FAIL_NONE = 0,
+ POSTCOPY_FAIL_CHANNEL_ESTABLISH,
+ POSTCOPY_FAIL_RECOVERY,
+ POSTCOPY_FAIL_MAX
+} PostcopyRecoveryFailStage;
+
+typedef struct {
+ /* Optional: fine tune start parameters */
+ MigrateStart start;
+
+ /* Required: the URI for the dst QEMU to listen on */
+ const char *listen_uri;
+
+ /*
+ * Optional: the URI for the src QEMU to connect to
+ * If NULL, then it will query the dst QEMU for its actual
+ * listening address and use that as the connect address.
+ * This allows for dynamically picking a free TCP port.
+ */
+ const char *connect_uri;
+
+ /*
+ * Optional: JSON-formatted list of src QEMU URIs. If a port is
+ * defined as '0' in any QDict key a value of '0' will be
+ * automatically converted to the correct destination port.
+ */
+ const char *connect_channels;
+
+ /* Optional: callback to run at start to set migration parameters */
+ TestMigrateStartHook start_hook;
+ /* Optional: callback to run at finish to cleanup */
+ TestMigrateEndHook end_hook;
+
+ /*
+ * Optional: normally we expect the migration process to complete.
+ *
+ * There can be a variety of reasons and stages in which failure
+ * can happen during tests.
+ *
+ * If a failure is expected to happen at time of establishing
+ * the connection, then MIG_TEST_FAIL will indicate that the dst
+ * QEMU is expected to stay running and accept future migration
+ * connections.
+ *
+ * If a failure is expected to happen while processing the
+ * migration stream, then MIG_TEST_FAIL_DEST_QUIT_ERR will indicate
+ * that the dst QEMU is expected to quit with non-zero exit status
+ */
+ enum {
+ /* This test should succeed, the default */
+ MIG_TEST_SUCCEED = 0,
+ /* This test should fail, dest qemu should keep alive */
+ MIG_TEST_FAIL,
+ /* This test should fail, dest qemu should fail with abnormal status */
+ MIG_TEST_FAIL_DEST_QUIT_ERR,
+ /* The QMP command for this migration should fail with an error */
+ MIG_TEST_QMP_ERROR,
+ } result;
+
+ /*
+ * Optional: set number of migration passes to wait for, if live==true.
+ * If zero, then merely wait for a few MB of dirty data
+ */
+ unsigned int iterations;
+
+ /*
+ * Optional: whether the guest CPUs should be running during a precopy
+ * migration test. We used to always run with live but it took much
+ * longer so we reduced live tests to only the ones that have solid
+ * reason to be tested live-only. For each of the new test cases for
+ * precopy please provide justifications to use live explicitly (please
+ * refer to existing ones with live=true), or use live=off by default.
+ */
+ bool live;
+
+ /* Postcopy specific fields */
+ void *postcopy_data;
+ bool postcopy_preempt;
+ PostcopyRecoveryFailStage postcopy_recovery_fail_stage;
+} MigrateCommon;
+
+void wait_for_serial(const char *side);
+void migrate_prepare_for_dirty_mem(QTestState *from);
+void migrate_wait_for_dirty_mem(QTestState *from, QTestState *to);
+int migrate_start(QTestState **from, QTestState **to, const char *uri,
+ MigrateStart *args);
+void migrate_end(QTestState *from, QTestState *to, bool test_dest);
+
+void test_postcopy_common(MigrateCommon *args);
+void test_postcopy_recovery_common(MigrateCommon *args);
+void test_precopy_common(MigrateCommon *args);
+void test_file_common(MigrateCommon *args, bool stop_src);
+void *migrate_hook_start_precopy_tcp_multifd_common(QTestState *from,
+ QTestState *to,
+ const char *method);
+
+typedef struct QTestMigrationState QTestMigrationState;
+QTestMigrationState *get_src(void);
+
+#endif /* TEST_FRAMEWORK_H */
The migration tests have a set of core infrastructure routines. These are functions that are called by (almost) all tests and centralize the common operations of: starting migration on both sides, waiting for guests to boot, performing guest initialization and teardown, guest memory validation, etc. Move this basic framework code (and a few static helpers) into a separate file. Leave only individual test functions (and their own static helpers) in migration-test.c. Signed-off-by: Fabiano Rosas <farosas@suse.de> --- tests/qtest/meson.build | 1 + tests/qtest/migration-test.c | 1140 +----------------------- tests/qtest/migration/bootfile.c | 2 +- tests/qtest/migration/bootfile.h | 2 +- tests/qtest/migration/test-framework.c | 969 ++++++++++++++++++++ tests/qtest/migration/test-framework.h | 216 +++++ 6 files changed, 1201 insertions(+), 1129 deletions(-) create mode 100644 tests/qtest/migration/test-framework.c create mode 100644 tests/qtest/migration/test-framework.h