diff mbox series

[v4,5/6] aspeed/soc: Support SDHCI for AST2700

Message ID 20241204084453.610660-6-jamin_lin@aspeedtech.com (mailing list archive)
State New
Headers show
Series Support SDHCI and eMMC for ast2700 | expand

Commit Message

Jamin Lin Dec. 4, 2024, 8:44 a.m. UTC 
Add SDHCI model for AST2700 SDHCI support. The SDHCI controller only support 1
slot and registers base address is start at 0x1408_0000 and its interrupt is
connected to GICINT133_INTC at bit 1.

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
---
 hw/arm/aspeed_ast27x0.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)
diff mbox series

Patch

diff --git a/hw/arm/aspeed_ast27x0.c b/hw/arm/aspeed_ast27x0.c
index 63d1fcb086..baddd35ecf 100644
--- a/hw/arm/aspeed_ast27x0.c
+++ b/hw/arm/aspeed_ast27x0.c
@@ -65,6 +65,7 @@  static const hwaddr aspeed_soc_ast2700_memmap[] = {
     [ASPEED_DEV_I2C]       =  0x14C0F000,
     [ASPEED_DEV_GPIO]      =  0x14C0B000,
     [ASPEED_DEV_RTC]       =  0x12C0F000,
+    [ASPEED_DEV_SDHCI]     =  0x14080000,
 };
 
 #define AST2700_MAX_IRQ 256
@@ -113,6 +114,7 @@  static const int aspeed_soc_ast2700_irqmap[] = {
     [ASPEED_DEV_KCS]       = 128,
     [ASPEED_DEV_DP]        = 28,
     [ASPEED_DEV_I3C]       = 131,
+    [ASPEED_DEV_SDHCI]     = 133,
 };
 
 /* GICINT 128 */
@@ -158,6 +160,7 @@  static const int aspeed_soc_ast2700_gic132_intcmap[] = {
 
 /* GICINT 133 */
 static const int aspeed_soc_ast2700_gic133_intcmap[] = {
+    [ASPEED_DEV_SDHCI]     = 1,
     [ASPEED_DEV_PECI]      = 4,
 };
 
@@ -380,6 +383,14 @@  static void aspeed_soc_ast2700_init(Object *obj)
     object_initialize_child(obj, "gpio", &s->gpio, typename);
 
     object_initialize_child(obj, "rtc", &s->rtc, TYPE_ASPEED_RTC);
+
+    snprintf(typename, sizeof(typename), "aspeed.sdhci-%s", socname);
+    object_initialize_child(obj, "sd-controller", &s->sdhci, typename);
+    object_property_set_int(OBJECT(&s->sdhci), "num-slots", 1, &error_abort);
+
+    /* Init sd card slot class here so that they're under the correct parent */
+    object_initialize_child(obj, "sd-controller.sdhci",
+                            &s->sdhci.slots[0], TYPE_SYSBUS_SDHCI);
 }
 
 /*
@@ -681,6 +692,15 @@  static void aspeed_soc_ast2700_realize(DeviceState *dev, Error **errp)
     sysbus_connect_irq(SYS_BUS_DEVICE(&s->rtc), 0,
                        aspeed_soc_get_irq(s, ASPEED_DEV_RTC));
 
+    /* SDHCI */
+    if (!sysbus_realize(SYS_BUS_DEVICE(&s->sdhci), errp)) {
+        return;
+    }
+    aspeed_mmio_map(s, SYS_BUS_DEVICE(&s->sdhci), 0,
+                    sc->memmap[ASPEED_DEV_SDHCI]);
+    sysbus_connect_irq(SYS_BUS_DEVICE(&s->sdhci), 0,
+                       aspeed_soc_get_irq(s, ASPEED_DEV_SDHCI));
+
     create_unimplemented_device("ast2700.dpmcu", 0x11000000, 0x40000);
     create_unimplemented_device("ast2700.iomem0", 0x12000000, 0x01000000);
     create_unimplemented_device("ast2700.iomem1", 0x14000000, 0x01000000);