@@ -2831,6 +2831,132 @@ static void vfio_unregister_req_notifier(VFIOPCIDevice *vdev)
vdev->req_enabled = false;
}
+static void vfio_pci_config_setup(VFIOPCIDevice *vdev, Error **errp)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ Error *err = NULL;
+
+ /* vfio emulates a lot for us, but some bits need extra love */
+ vdev->emulated_config_bits = g_malloc0(vdev->config_size);
+
+ /* QEMU can choose to expose the ROM or not */
+ memset(vdev->emulated_config_bits + PCI_ROM_ADDRESS, 0xff, 4);
+ /* QEMU can also add or extend BARs */
+ memset(vdev->emulated_config_bits + PCI_BASE_ADDRESS_0, 0xff, 6 * 4);
+
+ /*
+ * The PCI spec reserves vendor ID 0xffff as an invalid value. The
+ * device ID is managed by the vendor and need only be a 16-bit value.
+ * Allow any 16-bit value for subsystem so they can be hidden or changed.
+ */
+ if (vdev->vendor_id != PCI_ANY_ID) {
+ if (vdev->vendor_id >= 0xffff) {
+ error_setg(errp, "invalid PCI vendor ID provided");
+ return;
+ }
+ vfio_add_emulated_word(vdev, PCI_VENDOR_ID, vdev->vendor_id, ~0);
+ trace_vfio_pci_emulated_vendor_id(vdev->vbasedev.name, vdev->vendor_id);
+ } else {
+ vdev->vendor_id = pci_get_word(pdev->config + PCI_VENDOR_ID);
+ }
+
+ if (vdev->device_id != PCI_ANY_ID) {
+ if (vdev->device_id > 0xffff) {
+ error_setg(errp, "invalid PCI device ID provided");
+ return;
+ }
+ vfio_add_emulated_word(vdev, PCI_DEVICE_ID, vdev->device_id, ~0);
+ trace_vfio_pci_emulated_device_id(vdev->vbasedev.name, vdev->device_id);
+ } else {
+ vdev->device_id = pci_get_word(pdev->config + PCI_DEVICE_ID);
+ }
+
+ if (vdev->sub_vendor_id != PCI_ANY_ID) {
+ if (vdev->sub_vendor_id > 0xffff) {
+ error_setg(errp, "invalid PCI subsystem vendor ID provided");
+ return;
+ }
+ vfio_add_emulated_word(vdev, PCI_SUBSYSTEM_VENDOR_ID,
+ vdev->sub_vendor_id, ~0);
+ trace_vfio_pci_emulated_sub_vendor_id(vdev->vbasedev.name,
+ vdev->sub_vendor_id);
+ }
+
+ if (vdev->sub_device_id != PCI_ANY_ID) {
+ if (vdev->sub_device_id > 0xffff) {
+ error_setg(errp, "invalid PCI subsystem device ID provided");
+ return;
+ }
+ vfio_add_emulated_word(vdev, PCI_SUBSYSTEM_ID, vdev->sub_device_id, ~0);
+ trace_vfio_pci_emulated_sub_device_id(vdev->vbasedev.name,
+ vdev->sub_device_id);
+ }
+
+ /* QEMU can change multi-function devices to single function, or reverse */
+ vdev->emulated_config_bits[PCI_HEADER_TYPE] =
+ PCI_HEADER_TYPE_MULTI_FUNCTION;
+
+ /* Restore or clear multifunction, this is always controlled by QEMU */
+ if (vdev->pdev.cap_present & QEMU_PCI_CAP_MULTIFUNCTION) {
+ vdev->pdev.config[PCI_HEADER_TYPE] |= PCI_HEADER_TYPE_MULTI_FUNCTION;
+ } else {
+ vdev->pdev.config[PCI_HEADER_TYPE] &= ~PCI_HEADER_TYPE_MULTI_FUNCTION;
+ }
+
+ /*
+ * Clear host resource mapping info. If we choose not to register a
+ * BAR, such as might be the case with the option ROM, we can get
+ * confusing, unwritable, residual addresses from the host here.
+ */
+ memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24);
+ memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4);
+
+ vfio_pci_size_rom(vdev);
+
+ vfio_bars_prepare(vdev);
+
+ vfio_msix_early_setup(vdev, &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ vfio_bars_register(vdev);
+}
+
+static int vfio_interrupt_setup(VFIOPCIDevice *vdev, Error **errp)
+{
+ PCIDevice *pdev = &vdev->pdev;
+ int ret;
+
+ /* QEMU emulates all of MSI & MSIX */
+ if (pdev->cap_present & QEMU_PCI_CAP_MSIX) {
+ memset(vdev->emulated_config_bits + pdev->msix_cap, 0xff,
+ MSIX_CAP_LENGTH);
+ }
+
+ if (pdev->cap_present & QEMU_PCI_CAP_MSI) {
+ memset(vdev->emulated_config_bits + pdev->msi_cap, 0xff,
+ vdev->msi_cap_size);
+ }
+
+ if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) {
+ vdev->intx.mmap_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
+ vfio_intx_mmap_enable, vdev);
+ pci_device_set_intx_routing_notifier(&vdev->pdev,
+ vfio_intx_routing_notifier);
+ vdev->irqchip_change_notifier.notify = vfio_irqchip_change;
+ kvm_irqchip_add_change_notifier(&vdev->irqchip_change_notifier);
+ ret = vfio_intx_enable(vdev, errp);
+ if (ret) {
+ pci_device_set_intx_routing_notifier(&vdev->pdev, NULL);
+ kvm_irqchip_remove_change_notifier(&vdev->irqchip_change_notifier);
+ return ret;
+ }
+ }
+ return 0;
+}
+
static void vfio_realize(PCIDevice *pdev, Error **errp)
{
VFIOPCIDevice *vdev = VFIO_PCI_BASE(pdev);
@@ -2946,92 +3072,16 @@ static void vfio_realize(PCIDevice *pdev, Error **errp)
goto error;
}
- /* vfio emulates a lot for us, but some bits need extra love */
- vdev->emulated_config_bits = g_malloc0(vdev->config_size);
-
- /* QEMU can choose to expose the ROM or not */
- memset(vdev->emulated_config_bits + PCI_ROM_ADDRESS, 0xff, 4);
- /* QEMU can also add or extend BARs */
- memset(vdev->emulated_config_bits + PCI_BASE_ADDRESS_0, 0xff, 6 * 4);
-
- /*
- * The PCI spec reserves vendor ID 0xffff as an invalid value. The
- * device ID is managed by the vendor and need only be a 16-bit value.
- * Allow any 16-bit value for subsystem so they can be hidden or changed.
- */
- if (vdev->vendor_id != PCI_ANY_ID) {
- if (vdev->vendor_id >= 0xffff) {
- error_setg(errp, "invalid PCI vendor ID provided");
- goto error;
- }
- vfio_add_emulated_word(vdev, PCI_VENDOR_ID, vdev->vendor_id, ~0);
- trace_vfio_pci_emulated_vendor_id(vdev->vbasedev.name, vdev->vendor_id);
- } else {
- vdev->vendor_id = pci_get_word(pdev->config + PCI_VENDOR_ID);
- }
-
- if (vdev->device_id != PCI_ANY_ID) {
- if (vdev->device_id > 0xffff) {
- error_setg(errp, "invalid PCI device ID provided");
- goto error;
- }
- vfio_add_emulated_word(vdev, PCI_DEVICE_ID, vdev->device_id, ~0);
- trace_vfio_pci_emulated_device_id(vdev->vbasedev.name, vdev->device_id);
- } else {
- vdev->device_id = pci_get_word(pdev->config + PCI_DEVICE_ID);
- }
-
- if (vdev->sub_vendor_id != PCI_ANY_ID) {
- if (vdev->sub_vendor_id > 0xffff) {
- error_setg(errp, "invalid PCI subsystem vendor ID provided");
- goto error;
- }
- vfio_add_emulated_word(vdev, PCI_SUBSYSTEM_VENDOR_ID,
- vdev->sub_vendor_id, ~0);
- trace_vfio_pci_emulated_sub_vendor_id(vdev->vbasedev.name,
- vdev->sub_vendor_id);
- }
-
- if (vdev->sub_device_id != PCI_ANY_ID) {
- if (vdev->sub_device_id > 0xffff) {
- error_setg(errp, "invalid PCI subsystem device ID provided");
- goto error;
- }
- vfio_add_emulated_word(vdev, PCI_SUBSYSTEM_ID, vdev->sub_device_id, ~0);
- trace_vfio_pci_emulated_sub_device_id(vdev->vbasedev.name,
- vdev->sub_device_id);
- }
-
- /* QEMU can change multi-function devices to single function, or reverse */
- vdev->emulated_config_bits[PCI_HEADER_TYPE] =
- PCI_HEADER_TYPE_MULTI_FUNCTION;
-
- /* Restore or clear multifunction, this is always controlled by QEMU */
- if (vdev->pdev.cap_present & QEMU_PCI_CAP_MULTIFUNCTION) {
- vdev->pdev.config[PCI_HEADER_TYPE] |= PCI_HEADER_TYPE_MULTI_FUNCTION;
- } else {
- vdev->pdev.config[PCI_HEADER_TYPE] &= ~PCI_HEADER_TYPE_MULTI_FUNCTION;
- }
-
- /*
- * Clear host resource mapping info. If we choose not to register a
- * BAR, such as might be the case with the option ROM, we can get
- * confusing, unwritable, residual addresses from the host here.
- */
- memset(&vdev->pdev.config[PCI_BASE_ADDRESS_0], 0, 24);
- memset(&vdev->pdev.config[PCI_ROM_ADDRESS], 0, 4);
-
- vfio_pci_size_rom(vdev);
-
- vfio_bars_prepare(vdev);
-
- vfio_msix_early_setup(vdev, &err);
+ vfio_pci_config_setup(vdev, &err);
if (err) {
- error_propagate(errp, err);
goto error;
}
- vfio_bars_register(vdev);
+ /*
+ * vfio_pci_config_setup will have registered the device's BARs
+ * and setup any MSIX BARs, so errors after it succeeds must
+ * use out_teardown
+ */
ret = vfio_add_capabilities(vdev, errp);
if (ret) {
@@ -3072,29 +3122,15 @@ static void vfio_realize(PCIDevice *pdev, Error **errp)
}
}
- /* QEMU emulates all of MSI & MSIX */
- if (pdev->cap_present & QEMU_PCI_CAP_MSIX) {
- memset(vdev->emulated_config_bits + pdev->msix_cap, 0xff,
- MSIX_CAP_LENGTH);
- }
-
- if (pdev->cap_present & QEMU_PCI_CAP_MSI) {
- memset(vdev->emulated_config_bits + pdev->msi_cap, 0xff,
- vdev->msi_cap_size);
+ ret = vfio_interrupt_setup(vdev, errp);
+ if (ret) {
+ goto out_teardown;
}
- if (vfio_pci_read_config(&vdev->pdev, PCI_INTERRUPT_PIN, 1)) {
- vdev->intx.mmap_timer = timer_new_ms(QEMU_CLOCK_VIRTUAL,
- vfio_intx_mmap_enable, vdev);
- pci_device_set_intx_routing_notifier(&vdev->pdev,
- vfio_intx_routing_notifier);
- vdev->irqchip_change_notifier.notify = vfio_irqchip_change;
- kvm_irqchip_add_change_notifier(&vdev->irqchip_change_notifier);
- ret = vfio_intx_enable(vdev, errp);
- if (ret) {
- goto out_deregister;
- }
- }
+ /*
+ * vfio_interrupt_setup will have setup INTx's KVM routing
+ * so errors after it succeeds must use out_deregister
+ */
if (vdev->display != ON_OFF_AUTO_OFF) {
ret = vfio_display_probe(vdev, errp);
@@ -3488,8 +3524,41 @@ static void vfio_user_pci_realize(PCIDevice *pdev, Error **errp)
goto error;
}
+ /* Get a copy of config space */
+ ret = VDEV_REGION_READ(vbasedev, VFIO_PCI_CONFIG_REGION_INDEX, 0,
+ MIN(pci_config_size(pdev), vdev->config_size),
+ pdev->config);
+ if (ret < (int)MIN(pci_config_size(&vdev->pdev), vdev->config_size)) {
+ error_setg_errno(errp, -ret, "failed to read device config space");
+ goto error;
+ }
+
+ vfio_pci_config_setup(vdev, &err);
+ if (err) {
+ goto error;
+ }
+
+ /*
+ * vfio_pci_config_setup will have registered the device's BARs
+ * and setup any MSIX BARs, so errors after it succeeds must
+ * use out_teardown
+ */
+
+ ret = vfio_add_capabilities(vdev, errp);
+ if (ret) {
+ goto out_teardown;
+ }
+
+ ret = vfio_interrupt_setup(vdev, errp);
+ if (ret) {
+ goto out_teardown;
+ }
+
return;
+out_teardown:
+ vfio_teardown_msi(vdev);
+ vfio_bars_exit(vdev);
error:
vfio_user_disconnect(proxy);
error_prepend(errp, VFIO_MSG_PREFIX, vdev->vbasedev.name);