@@ -315,6 +315,7 @@ meson_args=""
ninja=""
bindir="bin"
skip_meson=no
+vfio_user_server="disabled"
# The following Meson options are handled manually (still they
# are included in the automatically generated help message)
@@ -909,6 +910,10 @@ for opt do
;;
--disable-blobs) meson_option_parse --disable-install-blobs ""
;;
+ --enable-vfio-user-server) vfio_user_server="enabled"
+ ;;
+ --disable-vfio-user-server) vfio_user_server="disabled"
+ ;;
--enable-tcmalloc) meson_option_parse --enable-malloc=tcmalloc tcmalloc
;;
--enable-jemalloc) meson_option_parse --enable-malloc=jemalloc jemalloc
@@ -2133,6 +2138,17 @@ write_container_target_makefile() {
+##########################################
+# check for vfio_user_server
+
+case "$vfio_user_server" in
+ enabled )
+ if test "$git_submodules_action" != "ignore"; then
+ git_submodules="${git_submodules} subprojects/libvfio-user"
+ fi
+ ;;
+esac
+
##########################################
# End of CC checks
# After here, no more $cc or $ld runs
@@ -2669,6 +2685,7 @@ if test "$skip_meson" = no; then
test "$slirp" != auto && meson_option_add "-Dslirp=$slirp"
test "$smbd" != '' && meson_option_add "-Dsmbd=$smbd"
test "$tcg" != enabled && meson_option_add "-Dtcg=$tcg"
+ test "$vfio_user_server" != auto && meson_option_add "-Dvfio_user_server=$vfio_user_server"
run_meson() {
NINJA=$ninja $meson setup --prefix "$prefix" "$@" $cross_arg "$PWD" "$source_path"
}
@@ -308,6 +308,10 @@ multiprocess_allowed = get_option('multiprocess') \
.require(targetos == 'linux', error_message: 'Multiprocess QEMU is supported only on Linux') \
.allowed()
+vfio_user_server_allowed = get_option('vfio_user_server') \
+ .require(targetos == 'linux', error_message: 'vfio-user server is supported only on Linux') \
+ .allowed()
+
have_tpm = get_option('tpm') \
.require(targetos != 'windows', error_message: 'TPM emulation only available on POSIX systems') \
.allowed()
@@ -2373,7 +2377,8 @@ host_kconfig = \
(have_virtfs ? ['CONFIG_VIRTFS=y'] : []) + \
('CONFIG_LINUX' in config_host ? ['CONFIG_LINUX=y'] : []) + \
(have_pvrdma ? ['CONFIG_PVRDMA=y'] : []) + \
- (multiprocess_allowed ? ['CONFIG_MULTIPROCESS_ALLOWED=y'] : [])
+ (multiprocess_allowed ? ['CONFIG_MULTIPROCESS_ALLOWED=y'] : []) + \
+ (vfio_user_server_allowed ? ['CONFIG_VFIO_USER_SERVER_ALLOWED=y'] : [])
ignored = [ 'TARGET_XML_FILES', 'TARGET_ABI_DIR', 'TARGET_ARCH' ]
@@ -2665,6 +2670,21 @@ if have_system
endif
endif
+libvfio_user_dep = not_found
+if have_system and vfio_user_server_allowed
+ have_internal = fs.exists(meson.current_source_dir() / 'subprojects/libvfio-user/meson.build')
+
+ if not have_internal
+ error('libvfio-user source not found - please pull git submodule')
+ endif
+
+ libvfio_user_proj = subproject('libvfio-user')
+
+ libvfio_user_lib = libvfio_user_proj.get_variable('libvfio_user_dep')
+
+ libvfio_user_dep = declare_dependency(dependencies: [libvfio_user_lib])
+endif
+
fdt = not_found
if have_system
fdt_opt = get_option('fdt')
@@ -3783,6 +3803,7 @@ summary_info += {'target list': ' '.join(target_dirs)}
if have_system
summary_info += {'default devices': get_option('default_devices')}
summary_info += {'out of process emulation': multiprocess_allowed}
+ summary_info += {'vfio-user server': vfio_user_server_allowed}
endif
summary(summary_info, bool_yn: true, section: 'Targets and accelerators')
@@ -168,6 +168,7 @@ build-system-centos:
IMAGE: centos8
CONFIGURE_ARGS: --disable-nettle --enable-gcrypt --enable-fdt=system
--enable-modules --enable-trace-backends=dtrace --enable-docs
+ --enable-vfio-user-server
TARGETS: ppc64-softmmu or1k-softmmu s390x-softmmu
x86_64-softmmu rx-softmmu sh4-softmmu nios2-softmmu
MAKE_CHECK_ARGS: check-build
@@ -64,3 +64,6 @@
[submodule "tests/lcitool/libvirt-ci"]
path = tests/lcitool/libvirt-ci
url = https://gitlab.com/libvirt/libvirt-ci.git
+[submodule "subprojects/libvfio-user"]
+ path = subprojects/libvfio-user
+ url = https://github.com/nutanix/libvfio-user.git
@@ -42,3 +42,7 @@ config MULTIPROCESS_ALLOWED
config FUZZ
bool
select SPARSE_MEM
+
+config VFIO_USER_SERVER_ALLOWED
+ bool
+ imply VFIO_USER_SERVER
@@ -3631,6 +3631,7 @@ F: hw/remote/proxy-memory-listener.c
F: include/hw/remote/proxy-memory-listener.h
F: hw/remote/iohub.c
F: include/hw/remote/iohub.h
+F: subprojects/libvfio-user
EBPF:
M: Jason Wang <jasowang@redhat.com>
@@ -2,3 +2,7 @@ config MULTIPROCESS
bool
depends on PCI && PCI_EXPRESS && KVM
select REMOTE_PCIHOST
+
+config VFIO_USER_SERVER
+ bool
+ depends on MULTIPROCESS
@@ -7,6 +7,8 @@ remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('remote-obj.c'))
remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('proxy.c'))
remote_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('iohub.c'))
+remote_ss.add(when: 'CONFIG_VFIO_USER_SERVER', if_true: libvfio_user_dep)
+
specific_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('memory.c'))
specific_ss.add(when: 'CONFIG_MULTIPROCESS', if_true: files('proxy-memory-listener.c'))
@@ -88,6 +88,8 @@ option('cfi_debug', type: 'boolean', value: 'false',
description: 'Verbose errors in case of CFI violation')
option('multiprocess', type: 'feature', value: 'auto',
description: 'Out of process device emulation support')
+option('vfio_user_server', type: 'feature', value: 'disabled',
+ description: 'vfio-user server support')
option('dbus_display', type: 'feature', value: 'auto',
description: '-display dbus support')
option('tpm', type : 'feature', value : 'auto',
new file mode 160000
@@ -0,0 +1 @@
+Subproject commit 0b28d205572c80b568a1003db2c8f37ca333e4d7
@@ -51,6 +51,7 @@ RUN dnf update -y && \
libbpf-devel \
libcacard-devel \
libcap-ng-devel \
+ libcmocka-devel \
libcurl-devel \
libdrm-devel \
libepoxy-devel \
@@ -59,6 +60,7 @@ RUN dnf update -y && \
libgcrypt-devel \
libiscsi-devel \
libjpeg-devel \
+ json-c-devel \
libnfs-devel \
libpmem-devel \
libpng-devel \