@@ -53,6 +53,13 @@ parameters.
Vendor ID. Set this to ``on`` to revert to the unallocated Intel ID
previously used.
+``ocp`` (default: ``off``)
+ The Open Compute Project defines the Datacenter NVMe SSD Specification that
+ sits on top of NVMe. It describes additional commands and NVMe behaviors
+ specific for the Datacenter. When this option is ``on`` OCP features such as
+ the SMART / Health information extended log become available in the
+ controller. We emulate version 5 of this log page.
+
Additional Namespaces
---------------------
@@ -4884,6 +4884,45 @@ static void nvme_set_blk_stats(NvmeNamespace *ns, struct nvme_stats *stats)
stats->write_commands += s->nr_ops[BLOCK_ACCT_WRITE];
}
+static uint16_t nvme_ocp_extended_smart_info(NvmeCtrl *n, uint8_t rae,
+ uint32_t buf_len, uint64_t off,
+ NvmeRequest *req)
+{
+ NvmeNamespace *ns = NULL;
+ NvmeSmartLogExtended smart_l = { 0 };
+ struct nvme_stats stats = { 0 };
+ uint32_t trans_len;
+
+ if (off >= sizeof(smart_l)) {
+ return NVME_INVALID_FIELD | NVME_DNR;
+ }
+
+ /* accumulate all stats from all namespaces */
+ for (int i = 1; i <= NVME_MAX_NAMESPACES; i++) {
+ ns = nvme_ns(n, i);
+ if (ns) {
+ nvme_set_blk_stats(ns, &stats);
+ }
+ }
+
+ smart_l.physical_media_units_written[0] = cpu_to_le64(stats.units_written);
+ smart_l.physical_media_units_read[0] = cpu_to_le64(stats.units_read);
+ smart_l.log_page_version = 0x0005;
+
+ static const uint8_t guid[16] = {
+ 0xC5, 0xAF, 0x10, 0x28, 0xEA, 0xBF, 0xF2, 0xA4,
+ 0x9C, 0x4F, 0x6F, 0x7C, 0xC9, 0x14, 0xD5, 0xAF
+ };
+ memcpy(smart_l.log_page_guid, guid, sizeof(smart_l.log_page_guid));
+
+ if (!rae) {
+ nvme_clear_events(n, NVME_AER_TYPE_SMART);
+ }
+
+ trans_len = MIN(sizeof(smart_l) - off, buf_len);
+ return nvme_c2h(n, (uint8_t *) &smart_l + off, trans_len, req);
+}
+
static uint16_t nvme_smart_info(NvmeCtrl *n, uint8_t rae, uint32_t buf_len,
uint64_t off, NvmeRequest *req)
{
@@ -5113,6 +5152,23 @@ static uint16_t nvme_cmd_effects(NvmeCtrl *n, uint8_t csi, uint32_t buf_len,
return nvme_c2h(n, ((uint8_t *)&log) + off, trans_len, req);
}
+static uint16_t nvme_vendor_specific_log(NvmeCtrl *n, uint8_t rae,
+ uint32_t buf_len, uint64_t off,
+ NvmeRequest *req, uint8_t lid)
+{
+ switch (lid) {
+ case 0xc0:
+ if (n->params.ocp) {
+ return nvme_ocp_extended_smart_info(n, rae, buf_len, off, req);
+ }
+ break;
+ /* add a case for each additional vendor specific log id */
+ }
+
+ trace_pci_nvme_err_invalid_log_page(nvme_cid(req), lid);
+ return NVME_INVALID_FIELD | NVME_DNR;
+}
+
static size_t sizeof_fdp_conf_descr(size_t nruh, size_t vss)
{
size_t entry_siz = sizeof(NvmeFdpDescrHdr) + nruh * sizeof(NvmeRuhDescr)
@@ -5363,6 +5419,8 @@ static uint16_t nvme_get_log(NvmeCtrl *n, NvmeRequest *req)
return nvme_smart_info(n, rae, len, off, req);
case NVME_LOG_FW_SLOT_INFO:
return nvme_fw_log_info(n, len, off, req);
+ case NVME_LOG_VENDOR_START...NVME_LOG_VENDOR_END:
+ return nvme_vendor_specific_log(n, rae, len, off, req, lid);
case NVME_LOG_CHANGED_NSLIST:
return nvme_changed_nslist(n, rae, len, off, req);
case NVME_LOG_CMD_EFFECTS:
@@ -8734,6 +8792,7 @@ static Property nvme_props[] = {
false),
DEFINE_PROP_UINT16("mqes", NvmeCtrl, params.mqes, 0x7ff),
DEFINE_PROP_UINT16("spdm_port", PCIDevice, spdm_port, 0),
+ DEFINE_PROP_BOOL("ocp", NvmeCtrl, params.ocp, false),
DEFINE_PROP_END_OF_LIST(),
};
@@ -538,6 +538,7 @@ typedef struct NvmeParams {
uint32_t sriov_max_vq_per_vf;
uint32_t sriov_max_vi_per_vf;
bool msix_exclusive_bar;
+ bool ocp;
} NvmeParams;
typedef struct NvmeCtrl {
@@ -1015,6 +1015,40 @@ typedef struct QEMU_PACKED NvmeSmartLog {
uint8_t reserved2[320];
} NvmeSmartLog;
+typedef struct QEMU_PACKED NvmeSmartLogExtended {
+ uint64_t physical_media_units_written[2];
+ uint64_t physical_media_units_read[2];
+ uint64_t bad_user_blocks;
+ uint64_t bad_system_nand_blocks;
+ uint64_t xor_recovery_count;
+ uint64_t uncorrectable_read_error_count;
+ uint64_t soft_ecc_error_count;
+ uint64_t end2end_correction_counts;
+ uint8_t system_data_percent_used;
+ uint8_t refresh_counts[7];
+ uint64_t user_data_erase_counts;
+ uint16_t thermal_throttling_stat_and_count;
+ uint16_t dssd_spec_version[3];
+ uint64_t pcie_correctable_error_count;
+ uint32_t incomplete_shutdowns;
+ uint32_t rsvd116;
+ uint8_t percent_free_blocks;
+ uint8_t rsvd121[7];
+ uint16_t capacity_health;
+ uint8_t nvme_errata_ver;
+ uint8_t rsvd131[5];
+ uint64_t unaligned_io;
+ uint64_t security_ver_num;
+ uint64_t total_nuse;
+ uint64_t plp_start_count[2];
+ uint64_t endurance_estimate[2];
+ uint64_t pcie_retraining_count;
+ uint64_t power_state_change_count;
+ uint8_t rsvd208[286];
+ uint16_t log_page_version;
+ uint64_t log_page_guid[2];
+} NvmeSmartLogExtended;
+
#define NVME_SMART_WARN_MAX 6
enum NvmeSmartWarn {
NVME_SMART_SPARE = 1 << 0,
@@ -1052,6 +1086,8 @@ enum NvmeLogIdentifier {
NVME_LOG_FDP_RUH_USAGE = 0x21,
NVME_LOG_FDP_STATS = 0x22,
NVME_LOG_FDP_EVENTS = 0x23,
+ NVME_LOG_VENDOR_START = 0xc0,
+ NVME_LOG_VENDOR_END = 0xff,
};
typedef struct QEMU_PACKED NvmePSD {
The Open Compute Project [1] includes a Datacenter NVMe SSD Specification [2]. The most recent version of this specification (as of November 2024) is 2.6.1. This specification layers on top of the NVM Express specifications [3] to provide additional functionality. A key part of of this is the 512 Byte OCP SMART / Health Information Extended log page that is defined in Section 4.8.6 of the specification. We add a controller argument (ocp) that toggles on/off the SMART log extended structure. To accommodate different vendor specific specifications like OCP, we add a multiplexing function (nvme_vendor_specific_log) which will route to the different log functions based on arguments and log ids. We only return the OCP extended SMART log when the command is 0xC0 and ocp has been turned on in the nvme argumants. Though we add the whole nvme SMART log extended structure, we only populate the physical_media_units_{read,written}, log_page_version and log_page_uuid. This patch is based on work done by Joel but has been modified enough that he requested a co-developed-by tag rather than a signed-off-by. [1]: https://www.opencompute.org/ [2]: https://www.opencompute.org/documents/datacenter-nvme-ssd-specification-v2-6-1-pdf [3]: https://nvmexpress.org/specifications/ Signed-off-by: Stephen Bates <sbates@raithlin.com> Co-developed-by: Joel Granados <j.granados@samsung.com> --- docs/system/devices/nvme.rst | 7 +++++ hw/nvme/ctrl.c | 59 ++++++++++++++++++++++++++++++++++++ hw/nvme/nvme.h | 1 + include/block/nvme.h | 36 ++++++++++++++++++++++ 4 files changed, 103 insertions(+)