@@ -20,22 +20,33 @@
*/
#include "qemu/osdep.h"
+#include "hw/ptimer.h"
#include "hw/timer/arm_mptimer.h"
#include "qapi/error.h"
-#include "qemu/timer.h"
+#include "qemu/main-loop.h"
#include "qom/cpu.h"
+#define PTIMER_POLICY \
+ (PTIMER_POLICY_WRAP_AFTER_ONE_PERIOD | \
+ PTIMER_POLICY_CONTINUOUS_TRIGGER | \
+ PTIMER_POLICY_NO_IMMEDIATE_TRIGGER | \
+ PTIMER_POLICY_NO_IMMEDIATE_RELOAD | \
+ PTIMER_POLICY_NO_COUNTER_ROUND_DOWN)
+
/* This device implements the per-cpu private timer and watchdog block
* which is used in both the ARM11MPCore and Cortex-A9MP.
*/
static inline int get_current_cpu(ARMMPTimerState *s)
{
- if (current_cpu->cpu_index >= s->num_cpu) {
+ int cpu_id = current_cpu ? current_cpu->cpu_index : 0;
+
+ if (cpu_id >= s->num_cpu) {
hw_error("arm_mptimer: num-cpu %d but this cpu is %d!\n",
- s->num_cpu, current_cpu->cpu_index);
+ s->num_cpu, cpu_id);
}
- return current_cpu->cpu_index;
+
+ return cpu_id;
}
static inline void timerblock_update_irq(TimerBlock *tb)
@@ -44,33 +55,42 @@ static inline void timerblock_update_irq(TimerBlock *tb)
}
/* Return conversion factor from mpcore timer ticks to qemu timer ticks. */
-static inline uint32_t timerblock_scale(TimerBlock *tb)
+static inline uint32_t timerblock_scale(uint32_t control)
{
- return (((tb->control >> 8) & 0xff) + 1) * 10;
+ return (((control >> 8) & 0xff) + 1) * 10;
}
-static void timerblock_reload(TimerBlock *tb, int restart)
+static inline void timerblock_set_count(struct ptimer_state *timer,
+ uint32_t control, uint64_t *count)
{
- if (tb->count == 0) {
- return;
+ /* PTimer would trigger interrupt for periodic timer when counter set
+ * to 0, MPtimer under certain condition only.
+ */
+ if ((control & 3) == 3 && (control & 0xff00) == 0 && *count == 0) {
+ *count = ptimer_get_limit(timer);
}
- if (restart) {
- tb->tick = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
+ ptimer_set_count(timer, *count);
+}
+
+static inline void timerblock_run(struct ptimer_state *timer,
+ uint32_t control, uint32_t load)
+{
+ if ((control & 1) && ((control & 0xff00) || load != 0)) {
+ ptimer_run(timer, !(control & 2));
}
- tb->tick += (int64_t)tb->count * timerblock_scale(tb);
- timer_mod(tb->timer, tb->tick);
}
static void timerblock_tick(void *opaque)
{
TimerBlock *tb = (TimerBlock *)opaque;
- tb->status = 1;
- if (tb->control & 2) {
- tb->count = tb->load;
- timerblock_reload(tb, 0);
- } else {
- tb->count = 0;
+ /* Periodic timer with load = 0 and prescaler != 0 would re-trigger
+ * IRQ after one period, otherwise it either stops or wraps around.
+ */
+ if ((tb->control & 2) && (tb->control & 0xff00) == 0 &&
+ ptimer_get_limit(tb->timer) == 0) {
+ ptimer_stop(tb->timer);
}
+ tb->status = 1;
timerblock_update_irq(tb);
}
@@ -78,21 +98,11 @@ static uint64_t timerblock_read(void *opaque, hwaddr addr,
unsigned size)
{
TimerBlock *tb = (TimerBlock *)opaque;
- int64_t val;
switch (addr) {
case 0: /* Load */
- return tb->load;
+ return ptimer_get_limit(tb->timer);
case 4: /* Counter. */
- if (((tb->control & 1) == 0) || (tb->count == 0)) {
- return 0;
- }
- /* Slow and ugly, but hopefully won't happen too often. */
- val = tb->tick - qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
- val /= timerblock_scale(tb);
- if (val < 0) {
- val = 0;
- }
- return val;
+ return ptimer_get_count(tb->timer);
case 8: /* Control. */
return tb->control;
case 12: /* Interrupt status. */
@@ -106,37 +116,45 @@ static void timerblock_write(void *opaque, hwaddr addr,
uint64_t value, unsigned size)
{
TimerBlock *tb = (TimerBlock *)opaque;
- int64_t old;
+ uint32_t control = tb->control;
switch (addr) {
case 0: /* Load */
- tb->load = value;
- /* Fall through. */
- case 4: /* Counter. */
- if ((tb->control & 1) && tb->count) {
- /* Cancel the previous timer. */
- timer_del(tb->timer);
+ /* Setting load to 0 stops the timer without doing the tick if
+ * prescaler = 0.
+ */
+ if ((control & 1) && (control & 0xff00) == 0 && value == 0) {
+ ptimer_stop(tb->timer);
}
- tb->count = value;
- if (tb->control & 1) {
- timerblock_reload(tb, 1);
+ ptimer_set_limit(tb->timer, value, 1);
+ timerblock_run(tb->timer, control, value);
+ break;
+ case 4: /* Counter. */
+ /* Setting counter to 0 stops the one-shot timer, or periodic with
+ * load = 0, without doing the tick if prescaler = 0.
+ */
+ if ((control & 1) && (control & 0xff00) == 0 && value == 0 &&
+ (!(control & 2) || ptimer_get_limit(tb->timer) == 0)) {
+ ptimer_stop(tb->timer);
}
+ timerblock_set_count(tb->timer, control, &value);
+ timerblock_run(tb->timer, control, value);
break;
case 8: /* Control. */
- old = tb->control;
- tb->control = value;
+ if ((control & 3) != (value & 3)) {
+ ptimer_stop(tb->timer);
+ }
+ if ((control & 0xff00) != (value & 0xff00)) {
+ ptimer_set_period(tb->timer, timerblock_scale(value));
+ }
if (value & 1) {
- if ((old & 1) && (tb->count != 0)) {
- /* Do nothing if timer is ticking right now. */
- break;
+ uint64_t count = ptimer_get_count(tb->timer);
+ /* Re-load periodic timer counter if needed. */
+ if ((value & 2) && count == 0) {
+ timerblock_set_count(tb->timer, value, &count);
}
- if (tb->control & 2) {
- tb->count = tb->load;
- }
- timerblock_reload(tb, 1);
- } else if (old & 1) {
- /* Shutdown the timer. */
- timer_del(tb->timer);
+ timerblock_run(tb->timer, value, count);
}
+ tb->control = value;
break;
case 12: /* Interrupt status. */
tb->status &= ~value;
@@ -186,13 +204,12 @@ static const MemoryRegionOps timerblock_ops = {
static void timerblock_reset(TimerBlock *tb)
{
- tb->count = 0;
- tb->load = 0;
tb->control = 0;
tb->status = 0;
- tb->tick = 0;
if (tb->timer) {
- timer_del(tb->timer);
+ ptimer_stop(tb->timer);
+ ptimer_set_limit(tb->timer, 0, 1);
+ ptimer_set_period(tb->timer, timerblock_scale(0));
}
}
@@ -238,7 +255,8 @@ static void arm_mptimer_realize(DeviceState *dev, Error **errp)
*/
for (i = 0; i < s->num_cpu; i++) {
TimerBlock *tb = &s->timerblock[i];
- tb->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, timerblock_tick, tb);
+ QEMUBH *bh = qemu_bh_new(timerblock_tick, tb);
+ tb->timer = ptimer_init(bh, PTIMER_POLICY);
sysbus_init_irq(sbd, &tb->irq);
memory_region_init_io(&tb->iomem, OBJECT(s), &timerblock_ops, tb,
"arm_mptimer_timerblock", 0x20);
@@ -248,26 +266,23 @@ static void arm_mptimer_realize(DeviceState *dev, Error **errp)
static const VMStateDescription vmstate_timerblock = {
.name = "arm_mptimer_timerblock",
- .version_id = 2,
- .minimum_version_id = 2,
+ .version_id = 3,
+ .minimum_version_id = 3,
.fields = (VMStateField[]) {
- VMSTATE_UINT32(count, TimerBlock),
- VMSTATE_UINT32(load, TimerBlock),
VMSTATE_UINT32(control, TimerBlock),
VMSTATE_UINT32(status, TimerBlock),
- VMSTATE_INT64(tick, TimerBlock),
- VMSTATE_TIMER_PTR(timer, TimerBlock),
+ VMSTATE_PTIMER(timer, TimerBlock),
VMSTATE_END_OF_LIST()
}
};
static const VMStateDescription vmstate_arm_mptimer = {
.name = "arm_mptimer",
- .version_id = 2,
- .minimum_version_id = 2,
+ .version_id = 3,
+ .minimum_version_id = 3,
.fields = (VMStateField[]) {
VMSTATE_STRUCT_VARRAY_UINT32(timerblock, ARMMPTimerState, num_cpu,
- 2, vmstate_timerblock, TimerBlock),
+ 3, vmstate_timerblock, TimerBlock),
VMSTATE_END_OF_LIST()
}
};
@@ -27,12 +27,9 @@
/* State of a single timer or watchdog block */
typedef struct {
- uint32_t count;
- uint32_t load;
uint32_t control;
uint32_t status;
- int64_t tick;
- QEMUTimer *timer;
+ struct ptimer_state *timer;
qemu_irq irq;
MemoryRegion iomem;
} TimerBlock;