@@ -420,6 +420,12 @@ struct RAMState {
/* Periodic throttle information */
bool throttle_running;
QemuThread throttle_thread;
+
+ /*
+ * Ratio of bytes_dirty_period and bytes_xfer_period in the previous
+ * sync.
+ */
+ uint64_t dirty_ratio_pct;
};
typedef struct RAMState RAMState;
@@ -1044,6 +1050,43 @@ static void migration_dirty_limit_guest(void)
trace_migration_dirty_limit_guest(quota_dirtyrate);
}
+static bool migration_dirty_ratio_high(RAMState *rs)
+{
+ static int dirty_ratio_high_cnt;
+ uint64_t threshold = migrate_throttle_trigger_threshold();
+ uint64_t bytes_xfer_period =
+ migration_transferred_bytes() - rs->bytes_xfer_prev;
+ uint64_t bytes_dirty_period = rs->num_dirty_pages_period * TARGET_PAGE_SIZE;
+ bool dirty_ratio_high = false;
+ uint64_t prev, curr;
+
+ /* Calculate the dirty ratio percentage */
+ curr = 100 * (bytes_dirty_period * 1.0 / bytes_xfer_period);
+
+ prev = rs->dirty_ratio_pct;
+ rs->dirty_ratio_pct = curr;
+
+ if (prev == 0) {
+ return false;
+ }
+
+ /*
+ * If current dirty ratio is greater than previouse, determine
+ * that the migration do not converge.
+ */
+ if (curr > threshold && curr >= prev) {
+ trace_migration_dirty_ratio_high(curr, prev);
+ dirty_ratio_high_cnt++;
+ }
+
+ if (dirty_ratio_high_cnt >= 2) {
+ dirty_ratio_high = true;
+ dirty_ratio_high_cnt = 0;
+ }
+
+ return dirty_ratio_high;
+}
+
static void migration_trigger_throttle(RAMState *rs)
{
uint64_t threshold = migrate_throttle_trigger_threshold();
@@ -1051,6 +1094,11 @@ static void migration_trigger_throttle(RAMState *rs)
migration_transferred_bytes() - rs->bytes_xfer_prev;
uint64_t bytes_dirty_period = rs->num_dirty_pages_period * TARGET_PAGE_SIZE;
uint64_t bytes_dirty_threshold = bytes_xfer_period * threshold / 100;
+ bool dirty_ratio_high = false;
+
+ if (migrate_responsive_throttle() && (bytes_xfer_period != 0)) {
+ dirty_ratio_high = migration_dirty_ratio_high(rs);
+ }
/*
* The following detection logic can be refined later. For now:
@@ -1060,8 +1108,11 @@ static void migration_trigger_throttle(RAMState *rs)
* twice, start or increase throttling.
*/
if ((bytes_dirty_period > bytes_dirty_threshold) &&
- (++rs->dirty_rate_high_cnt >= 2)) {
- rs->dirty_rate_high_cnt = 0;
+ ((++rs->dirty_rate_high_cnt >= 2) || dirty_ratio_high)) {
+
+ rs->dirty_rate_high_cnt =
+ rs->dirty_rate_high_cnt >= 2 ? 0 : rs->dirty_rate_high_cnt;
+
if (migrate_auto_converge()) {
trace_migration_throttle();
mig_throttle_guest_down(bytes_dirty_period,
@@ -95,6 +95,7 @@ get_queued_page_not_dirty(const char *block_name, uint64_t tmp_offset, unsigned
migration_bitmap_sync_start(void) ""
migration_bitmap_sync_end(uint64_t dirty_pages) "dirty_pages %" PRIu64
migration_bitmap_clear_dirty(char *str, uint64_t start, uint64_t size, unsigned long page) "rb %s start 0x%"PRIx64" size 0x%"PRIx64" page 0x%lx"
+migration_dirty_ratio_high(uint64_t cur, uint64_t prev) "current ratio: %" PRIu64 " previous ratio: %" PRIu64
migration_periodic_throttle(void) ""
migration_periodic_throttle_start(void) ""
migration_periodic_throttle_stop(void) ""
@@ -2812,6 +2812,7 @@ static void test_migrate_auto_converge_args(AutoConvergeArgs *input_args)
migrate_set_parameter_int(from, "cpu-throttle-initial", init_pct);
migrate_set_parameter_int(from, "cpu-throttle-increment", inc_pct);
migrate_set_parameter_int(from, "max-cpu-throttle", max_pct);
+ migrate_set_parameter_bool(from, "cpu-responsive-throttle", true);
if (periodic) {
migrate_set_parameter_bool(from, "cpu-periodic-throttle", true);
Currently, the convergence algorithm determines that the migration cannot converge according to the following principle: The dirty pages generated in current iteration exceed a specific percentage (throttle-trigger-threshold, 50 by default) of the number of transmissions. Let's refer to this criteria as the "dirty rate". If this criteria is met more than or equal to twice (dirty_rate_high_cnt >= 2), the throttle percentage increased. In most cases, above implementation is appropriate. However, for a VM with high memory overload, each iteration is time-consuming. The VM's computing performance may be throttled at a high percentage and last for a long time due to the repeated confirmation behavior. Which may be intolerable for some computationally sensitive software in the VM. As the comment mentioned in the migration_trigger_throttle function, in order to avoid erroneous detection, the original algorithm confirms the criteria repeatedly. Put differently, the criteria does not need to be validated again once the detection is more reliable. In the refinement, in order to make the detection more accurate, we introduce another criteria, called the "dirty ratio" to determine the migration convergence. The "dirty ratio" is the ratio of bytes_xfer_period and bytes_dirty_period. When the algorithm repeatedly detects that the "dirty ratio" of current sync is lower than the previous, the algorithm determines that the migration cannot converge. For the "dirty rate" and "dirty ratio", if one of the two criteria is met, the penalty percentage would be increased. This makes CPU throttle more responsively and therefor saves the time of the entire iteration and therefore reduces the time of VM performance degradation. In conclusion, this refinement significantly reduces the processing time required for the throttle percentage step to its maximum while the VM is under a high memory load. Signed-off-by: Hyman Huang <yong.huang@smartx.com> --- migration/ram.c | 55 ++++++++++++++++++++++++++++++++++-- migration/trace-events | 1 + tests/qtest/migration-test.c | 1 + 3 files changed, 55 insertions(+), 2 deletions(-)