diff mbox series

[v2,4/8] arm64: nvhe: add bee-headers support

Message ID 20240906-macos-build-support-v2-4-06beff418848@samsung.com (mailing list archive)
State Changes Requested
Delegated to: Paul Moore
Headers show
Series Enable build system on macOS hosts | expand

Commit Message

Daniel Gomez via B4 Relay Sept. 6, 2024, 11:01 a.m. UTC 
From: Daniel Gomez <da.gomez@samsung.com>

endian.h header is not provided by default in macOS. Use pkg-config with
the new development package 'bee-headers' [1] to find the path where the
headers are installed.

[1] Bee Headers Project links:
https://github.com/bee-headers/headers
https://github.com/bee-headers/homebrew-bee-headers

It requires to install bee-headers Homebrew Tap:

  brew tap bee-headers/bee-headers
  brew install bee-headers/bee-headers/bee-headers

Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
---
 arch/arm64/kernel/pi/Makefile     | 1 +
 arch/arm64/kernel/vdso32/Makefile | 1 +
 arch/arm64/kvm/hyp/nvhe/Makefile  | 3 ++-
 3 files changed, 4 insertions(+), 1 deletion(-)

Comments

Masahiro Yamada Sept. 6, 2024, 2:02 p.m. UTC | #1 
On Fri, Sep 6, 2024 at 8:01 PM Daniel Gomez via B4 Relay
<devnull+da.gomez.samsung.com@kernel.org> wrote:
>
> From: Daniel Gomez <da.gomez@samsung.com>
>
> endian.h header is not provided by default in macOS. Use pkg-config with
> the new development package 'bee-headers' [1] to find the path where the
> headers are installed.
>
> [1] Bee Headers Project links:
> https://github.com/bee-headers/headers
> https://github.com/bee-headers/homebrew-bee-headers
>
> It requires to install bee-headers Homebrew Tap:
>
>   brew tap bee-headers/bee-headers
>   brew install bee-headers/bee-headers/bee-headers
>
> Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
> ---
>  arch/arm64/kernel/pi/Makefile     | 1 +
>  arch/arm64/kernel/vdso32/Makefile | 1 +
>  arch/arm64/kvm/hyp/nvhe/Makefile  | 3 ++-
>  3 files changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile
> index 4d11a8c29181..259c9a45fba0 100644
> --- a/arch/arm64/kernel/pi/Makefile
> +++ b/arch/arm64/kernel/pi/Makefile
> @@ -20,6 +20,7 @@ KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
>  KBUILD_CFLAGS  := $(filter-out $(CC_FLAGS_LTO), $(KBUILD_CFLAGS))
>
>  hostprogs      := relacheck
> +HOSTCFLAGS_relacheck.o = $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
>
>  quiet_cmd_piobjcopy = $(quiet_cmd_objcopy)
>        cmd_piobjcopy = $(cmd_objcopy) && $(obj)/relacheck $(@) $(<)
> diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
> index 25a2cb6317f3..6cb8a04bd829 100644
> --- a/arch/arm64/kernel/vdso32/Makefile
> +++ b/arch/arm64/kernel/vdso32/Makefile
> @@ -107,6 +107,7 @@ VDSO_LDFLAGS += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
>  # $(hostprogs) with $(obj)
>  munge := ../../../arm/vdso/vdsomunge
>  hostprogs := $(munge)
> +HOSTCFLAGS_$(munge).o = $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
>
>  c-obj-vdso := note.o
>  c-obj-vdso-gettimeofday := vgettimeofday.o
> diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
> index b43426a493df..d20a440b6964 100644
> --- a/arch/arm64/kvm/hyp/nvhe/Makefile
> +++ b/arch/arm64/kvm/hyp/nvhe/Makefile
> @@ -15,7 +15,8 @@ ccflags-y += -fno-stack-protector     \
>              $(DISABLE_STACKLEAK_PLUGIN)
>
>  hostprogs := gen-hyprel
> -HOST_EXTRACFLAGS += -I$(objtree)/include
> +HOST_EXTRACFLAGS += -I$(objtree)/include \
> +       $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
>
>  lib-objs := clear_page.o copy_page.o memcpy.o memset.o
>  lib-objs := $(addprefix ../../../lib/, $(lib-objs))
>
> --
> 2.46.0
>
>

NACK.

Developers working on Linux distributions have no interest
in your homebrew setup.

For 99% of users, pkg-config does not do anything good.
It is a waste of process forks.



You need to do it outside.


 $ HOSTCFLAGS=$(pkg-config --cflags bee-headers) make

or

 $ export HOSTCFLAGS=$(pkg-config --cflags bee-headers)
 $ make
Daniel Gomez Sept. 7, 2024, 9:27 a.m. UTC | #2 
On Fri, Sep 6, 2024 at 4:03 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
>
> On Fri, Sep 6, 2024 at 8:01 PM Daniel Gomez via B4 Relay
> <devnull+da.gomez.samsung.com@kernel.org> wrote:
> >
> > From: Daniel Gomez <da.gomez@samsung.com>
> >
> > endian.h header is not provided by default in macOS. Use pkg-config with
> > the new development package 'bee-headers' [1] to find the path where the
> > headers are installed.
> >
> > [1] Bee Headers Project links:
> > https://github.com/bee-headers/headers
> > https://github.com/bee-headers/homebrew-bee-headers
> >
> > It requires to install bee-headers Homebrew Tap:
> >
> >   brew tap bee-headers/bee-headers
> >   brew install bee-headers/bee-headers/bee-headers
> >
> > Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
> > ---
> >  arch/arm64/kernel/pi/Makefile     | 1 +
> >  arch/arm64/kernel/vdso32/Makefile | 1 +
> >  arch/arm64/kvm/hyp/nvhe/Makefile  | 3 ++-
> >  3 files changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile
> > index 4d11a8c29181..259c9a45fba0 100644
> > --- a/arch/arm64/kernel/pi/Makefile
> > +++ b/arch/arm64/kernel/pi/Makefile
> > @@ -20,6 +20,7 @@ KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
> >  KBUILD_CFLAGS  := $(filter-out $(CC_FLAGS_LTO), $(KBUILD_CFLAGS))
> >
> >  hostprogs      := relacheck
> > +HOSTCFLAGS_relacheck.o = $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
> >
> >  quiet_cmd_piobjcopy = $(quiet_cmd_objcopy)
> >        cmd_piobjcopy = $(cmd_objcopy) && $(obj)/relacheck $(@) $(<)
> > diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
> > index 25a2cb6317f3..6cb8a04bd829 100644
> > --- a/arch/arm64/kernel/vdso32/Makefile
> > +++ b/arch/arm64/kernel/vdso32/Makefile
> > @@ -107,6 +107,7 @@ VDSO_LDFLAGS += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
> >  # $(hostprogs) with $(obj)
> >  munge := ../../../arm/vdso/vdsomunge
> >  hostprogs := $(munge)
> > +HOSTCFLAGS_$(munge).o = $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
> >
> >  c-obj-vdso := note.o
> >  c-obj-vdso-gettimeofday := vgettimeofday.o
> > diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
> > index b43426a493df..d20a440b6964 100644
> > --- a/arch/arm64/kvm/hyp/nvhe/Makefile
> > +++ b/arch/arm64/kvm/hyp/nvhe/Makefile
> > @@ -15,7 +15,8 @@ ccflags-y += -fno-stack-protector     \
> >              $(DISABLE_STACKLEAK_PLUGIN)
> >
> >  hostprogs := gen-hyprel
> > -HOST_EXTRACFLAGS += -I$(objtree)/include
> > +HOST_EXTRACFLAGS += -I$(objtree)/include \
> > +       $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
> >
> >  lib-objs := clear_page.o copy_page.o memcpy.o memset.o
> >  lib-objs := $(addprefix ../../../lib/, $(lib-objs))
> >
> > --
> > 2.46.0
> >
> >
>
> NACK.
>
> Developers working on Linux distributions have no interest
> in your homebrew setup.
>
> For 99% of users, pkg-config does not do anything good.
> It is a waste of process forks.

I didn't think of this, and I agree with you.

>
>
>
> You need to do it outside.
>
>
>  $ HOSTCFLAGS=$(pkg-config --cflags bee-headers) make
>
> or
>
>  $ export HOSTCFLAGS=$(pkg-config --cflags bee-headers)
>  $ make

Would a Makefile variable be suitable for this use case to make it
easier in the command-line?

We can detect we are in a non-linux based environment and enable a
Makefile <VAR> (e.g., NOLINUX=1) and handle the NOLINUX build case
(with pkg-config/bee-headers) inside the Makefiles for these non-linux
cases.


>
>
>
>
>
> --
> Best Regards
> Masahiro Yamada
Masahiro Yamada Sept. 8, 2024, 1:17 a.m. UTC | #3 
On Sat, Sep 7, 2024 at 6:28 PM Daniel Gomez (Samsung)
<d+samsung@kruces.com> wrote:
>
> On Fri, Sep 6, 2024 at 4:03 PM Masahiro Yamada <masahiroy@kernel.org> wrote:
> >
> > On Fri, Sep 6, 2024 at 8:01 PM Daniel Gomez via B4 Relay
> > <devnull+da.gomez.samsung.com@kernel.org> wrote:
> > >
> > > From: Daniel Gomez <da.gomez@samsung.com>
> > >
> > > endian.h header is not provided by default in macOS. Use pkg-config with
> > > the new development package 'bee-headers' [1] to find the path where the
> > > headers are installed.
> > >
> > > [1] Bee Headers Project links:
> > > https://github.com/bee-headers/headers
> > > https://github.com/bee-headers/homebrew-bee-headers
> > >
> > > It requires to install bee-headers Homebrew Tap:
> > >
> > >   brew tap bee-headers/bee-headers
> > >   brew install bee-headers/bee-headers/bee-headers
> > >
> > > Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
> > > ---
> > >  arch/arm64/kernel/pi/Makefile     | 1 +
> > >  arch/arm64/kernel/vdso32/Makefile | 1 +
> > >  arch/arm64/kvm/hyp/nvhe/Makefile  | 3 ++-
> > >  3 files changed, 4 insertions(+), 1 deletion(-)
> > >
> > > diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile
> > > index 4d11a8c29181..259c9a45fba0 100644
> > > --- a/arch/arm64/kernel/pi/Makefile
> > > +++ b/arch/arm64/kernel/pi/Makefile
> > > @@ -20,6 +20,7 @@ KBUILD_CFLAGS := $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
> > >  KBUILD_CFLAGS  := $(filter-out $(CC_FLAGS_LTO), $(KBUILD_CFLAGS))
> > >
> > >  hostprogs      := relacheck
> > > +HOSTCFLAGS_relacheck.o = $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
> > >
> > >  quiet_cmd_piobjcopy = $(quiet_cmd_objcopy)
> > >        cmd_piobjcopy = $(cmd_objcopy) && $(obj)/relacheck $(@) $(<)
> > > diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
> > > index 25a2cb6317f3..6cb8a04bd829 100644
> > > --- a/arch/arm64/kernel/vdso32/Makefile
> > > +++ b/arch/arm64/kernel/vdso32/Makefile
> > > @@ -107,6 +107,7 @@ VDSO_LDFLAGS += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
> > >  # $(hostprogs) with $(obj)
> > >  munge := ../../../arm/vdso/vdsomunge
> > >  hostprogs := $(munge)
> > > +HOSTCFLAGS_$(munge).o = $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
> > >
> > >  c-obj-vdso := note.o
> > >  c-obj-vdso-gettimeofday := vgettimeofday.o
> > > diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
> > > index b43426a493df..d20a440b6964 100644
> > > --- a/arch/arm64/kvm/hyp/nvhe/Makefile
> > > +++ b/arch/arm64/kvm/hyp/nvhe/Makefile
> > > @@ -15,7 +15,8 @@ ccflags-y += -fno-stack-protector     \
> > >              $(DISABLE_STACKLEAK_PLUGIN)
> > >
> > >  hostprogs := gen-hyprel
> > > -HOST_EXTRACFLAGS += -I$(objtree)/include
> > > +HOST_EXTRACFLAGS += -I$(objtree)/include \
> > > +       $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
> > >
> > >  lib-objs := clear_page.o copy_page.o memcpy.o memset.o
> > >  lib-objs := $(addprefix ../../../lib/, $(lib-objs))
> > >
> > > --
> > > 2.46.0
> > >
> > >
> >
> > NACK.
> >
> > Developers working on Linux distributions have no interest
> > in your homebrew setup.
> >
> > For 99% of users, pkg-config does not do anything good.
> > It is a waste of process forks.
>
> I didn't think of this, and I agree with you.
>
> >
> >
> >
> > You need to do it outside.
> >
> >
> >  $ HOSTCFLAGS=$(pkg-config --cflags bee-headers) make
> >
> > or
> >
> >  $ export HOSTCFLAGS=$(pkg-config --cflags bee-headers)
> >  $ make
>
> Would a Makefile variable be suitable for this use case to make it
> easier in the command-line?



HOSTCFLAGS is an environment variable.


See Documentation/kbuild/kbuild.rst


  HOSTCFLAGS
  ----------
  Additional flags to be passed to $(HOSTCC) when building host programs.




If you do not want to type it every time,
add the following to ~/.profile or ~/.bashrc, etc.


export HOSTCFLAGS="$(pkg-config --cflags bee-headers) -D_UUID_T
-D__GETHOSTUUID_H"




Or, if you want to limit this HOSTCFLAGS definition
only to a specific kernel tree, you can add GNUmakefile
to wrap Makefile.

This is how people often add local setups without
typing a long command.



GNUmakefile:

  export HOSTCFLAGS = $(shell pkg-config --cflags bee-headers)
-D_UUID_T -D__GETHOSTUUID_H
  include Makefile




Then, you do not need to bother the upstream kernel.







> We can detect we are in a non-linux based environment and enable a
> Makefile <VAR> (e.g., NOLINUX=1) and handle the NOLINUX build case
> (with pkg-config/bee-headers) inside the Makefiles for these non-linux
> cases.


NACK.



>
> >
> >
> >
> >
> >
> > --
> > Best Regards
> > Masahiro Yamada



--
Best Regards
Masahiro Yamada
diff mbox series

Patch

diff --git a/arch/arm64/kernel/pi/Makefile b/arch/arm64/kernel/pi/Makefile
index 4d11a8c29181..259c9a45fba0 100644
--- a/arch/arm64/kernel/pi/Makefile
+++ b/arch/arm64/kernel/pi/Makefile
@@ -20,6 +20,7 @@  KBUILD_CFLAGS	:= $(filter-out $(CC_FLAGS_SCS), $(KBUILD_CFLAGS))
 KBUILD_CFLAGS	:= $(filter-out $(CC_FLAGS_LTO), $(KBUILD_CFLAGS))
 
 hostprogs	:= relacheck
+HOSTCFLAGS_relacheck.o = $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
 
 quiet_cmd_piobjcopy = $(quiet_cmd_objcopy)
       cmd_piobjcopy = $(cmd_objcopy) && $(obj)/relacheck $(@) $(<)
diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
index 25a2cb6317f3..6cb8a04bd829 100644
--- a/arch/arm64/kernel/vdso32/Makefile
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -107,6 +107,7 @@  VDSO_LDFLAGS += --orphan-handling=$(CONFIG_LD_ORPHAN_WARN_LEVEL)
 # $(hostprogs) with $(obj)
 munge := ../../../arm/vdso/vdsomunge
 hostprogs := $(munge)
+HOSTCFLAGS_$(munge).o = $(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
 
 c-obj-vdso := note.o
 c-obj-vdso-gettimeofday := vgettimeofday.o
diff --git a/arch/arm64/kvm/hyp/nvhe/Makefile b/arch/arm64/kvm/hyp/nvhe/Makefile
index b43426a493df..d20a440b6964 100644
--- a/arch/arm64/kvm/hyp/nvhe/Makefile
+++ b/arch/arm64/kvm/hyp/nvhe/Makefile
@@ -15,7 +15,8 @@  ccflags-y += -fno-stack-protector	\
 	     $(DISABLE_STACKLEAK_PLUGIN)
 
 hostprogs := gen-hyprel
-HOST_EXTRACFLAGS += -I$(objtree)/include
+HOST_EXTRACFLAGS += -I$(objtree)/include \
+	$(shell $(HOSTPKG_CONFIG) --cflags bee-headers 2> /dev/null)
 
 lib-objs := clear_page.o copy_page.o memcpy.o memset.o
 lib-objs := $(addprefix ../../../lib/, $(lib-objs))