mbox series

[00/15] MIPS: pistachio: Creator Ci40 aka Marduk SPI-UART

Message ID 20180722212010.3979-1-afaerber@suse.de (mailing list archive)
Headers show
Series MIPS: pistachio: Creator Ci40 aka Marduk SPI-UART | expand

Message

Andreas Färber July 22, 2018, 9:19 p.m. UTC 
Hello,

This patchset enables SPI and UARTs for the Ci40's mikroBUS and Raspberry Pi B+
connectors, as well as the remaining seven LEDs and as dependency the 802.15.4.

I also dug out some related driver fixes from their pistachio-4.9-lede branch:
https://github.com/CreatorDev/linux/commits/pistachio-4.9-lede

Tested with a LoRa click expansion board. [*]
Note that a number of drivers are missing in the pistachio defconfig. This
should probably be remedied as follow-up.

While all creatordev.io websites appear to be gone, I still had a local copy
of the Ci40 schematics document.

This patchset: https://github.com/afaerber/linux/commits/ci40-spi-uart.v1

Some more potential patches for missing features appear to be here:
https://github.com/CreatorDev/linux/commits/pistachio-4.9-wip

Have a lot of fun!

Cheers,
Andreas

P.S. As follow-up to this series I've reported on linux-serial that sc16is7xx
and serdev drivers don't appear to play nicely together:
https://marc.info/?l=linux-serial&m=153228314300681&w=2

[*] Cf. netdev https://patchwork.ozlabs.org/cover/937545/

Cc: Rob Herring <robh@kernel.org>
Cc: devicetree@vger.kernel.org

Cc: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org

Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org

Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: linux-clk@vger.kernel.org

Andreas Färber (7):
  MIPS: dts: img: pistachio_marduk: Reorder nodes
  MIPS: dts: img: pistachio_marduk: Cleanups
  MIPS: dts: img: pistachio: Rename spim0-clk pin node label
  MIPS: dts: img: pistachio_marduk: Enable SPIM0
  MIPS: dts: img: pistachio_marduk: Add 6Lowpan node
  MIPS: dts: img: pistachio_marduk: Add SPI UART node
  MIPS: dts: img: pistachio_marduk: Add user LEDs

Damien Horsley (1):
  dmaengine: img-mdc: Handle early status read

Govindraj Raja (1):
  clk: pistachio: Fix wrong SDHost card speed

Ian Pozella (1):
  MIPS: dts: img: pistachio_marduk: Switch mmc to 1 bit mode

Ionela Voinescu (5):
  spi: img-spfi: Implement dual and quad mode
  spi: img-spfi: Set device select bits for SPFI port state
  spi: img-spfi: Use device 0 configuration for all devices
  spi: img-spfi: RX maximum burst size for DMA is 8
  spi: img-spfi: Finish every transfer cleanly

 arch/mips/boot/dts/img/pistachio.dtsi       |   2 +-
 arch/mips/boot/dts/img/pistachio_marduk.dts | 174 ++++++++++++++++++++++------
 drivers/clk/pistachio/clk-pistachio.c       |   3 +-
 drivers/dma/img-mdc-dma.c                   |  40 ++++---
 drivers/spi/spi-img-spfi.c                  | 165 +++++++++++++++++++++-----
 include/dt-bindings/clock/pistachio-clk.h   |   1 +
 6 files changed, 299 insertions(+), 86 deletions(-)