diff mbox series

[v2,1/2] dt-bindings: memory: document Renesas RPC-IF bindings

Message ID 116683d1-d402-4d7f-3357-1c8cde807076@cogentembedded.com (mailing list archive)
State Superseded
Headers show
Series Add Renesas RPC-IF support | expand

Commit Message

Sergei Shtylyov April 30, 2020, 8:47 p.m. UTC
Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or
HyperFlash connected to the SoC to be accessed via the external address
space read mode or the manual mode.

Document the device tree bindings for the Renesas RPC-IF found in the R-Car
gen3 SoCs.

Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
Changes in version 2:
- rewrote the bindings in YAML.

 Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml |   88 ++++++++++
 1 file changed, 88 insertions(+)

Comments

Rob Herring (Arm) May 1, 2020, 9:19 p.m. UTC | #1
On Thu, 30 Apr 2020 23:47:25 +0300, Sergei Shtylyov wrote:
> Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or
> HyperFlash connected to the SoC to be accessed via the external address
> space read mode or the manual mode.
> 
> Document the device tree bindings for the Renesas RPC-IF found in the R-Car
> gen3 SoCs.
> 
> Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> Changes in version 2:
> - rewrote the bindings in YAML.
> 
>  Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml |   88 ++++++++++
>  1 file changed, 88 insertions(+)
> 

My bot found errors running 'make dt_binding_check' on your patch:

Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml:  while scanning a simple key
  in "<unicode string>", line 29, column 9
could not find expected ':'
  in "<unicode string>", line 30, column 1
Documentation/devicetree/bindings/Makefile:11: recipe for target 'Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.example.dts' failed
make[1]: *** [Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.example.dts] Error 1
make[1]: *** Waiting for unfinished jobs....
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml: ignoring, error parsing file
warning: no schema found in file: Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml: ignoring, error parsing file
warning: no schema found in file: Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
Makefile:1300: recipe for target 'dt_binding_check' failed
make: *** [dt_binding_check] Error 2

See https://patchwork.ozlabs.org/patch/1280942

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.
Rob Herring (Arm) May 1, 2020, 9:25 p.m. UTC | #2
On Thu, Apr 30, 2020 at 11:47:25PM +0300, Sergei Shtylyov wrote:
> Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or
> HyperFlash connected to the SoC to be accessed via the external address
> space read mode or the manual mode.
> 
> Document the device tree bindings for the Renesas RPC-IF found in the R-Car
> gen3 SoCs.
> 
> Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> Changes in version 2:
> - rewrote the bindings in YAML.
> 
>  Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml |   88 ++++++++++

Not where we normally put SPI flash controllers...

>  1 file changed, 88 insertions(+)
> 
> Index: linux/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
> ===================================================================
> --- /dev/null
> +++ linux/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: (GPL-2.0)

Dual license new bindings:

(GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Renesas Reduced Pin Count Interface (RPC-IF)
> +
> +maintainers:
> +  - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> +
> +description: |
> +  Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
> +  be accessed via the external address space read mode or the manual mode.
> +
> +  The flash chip itself should be represented by a subnode of the RPC-IF node.
> +  The flash interface is selected based on the "compatible" property of this
> +  subnode:
> +  - if it contains "jedec,spi-nor", then SPI is used;
> +  - if it contains "cfi-flash", then HyperFlash is used.
> +
> +allOf:
> +  - $ref: "/schemas/spi/spi-controller.yaml#"
> +
> +properties:
> +  compatible:
> +    items:
> +      - enum:
> +        renesas,r8a77980-rpc-if # device is a part of R8A77980 SoC
> +	renesas,r8a77995-rpc-if # device is a part of R8A77995 SoC

Not valid yaml with tab and not valid json-schema as 'enum' is a list 
(needs '-').

> +      - enum:
> +        renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
> +
> +  reg:
> +    items:
> +       - description: RPC-IF registers
> +       - description: direct mapping read mode area
> +       - description: write buffer area

Wrong indentation.

> +
> +  reg-names:
> +    items:
> +      - const: regs
> +      - const: dirmap
> +      - const: wbuf
> +
> +  clocks:
> +    maxItems: 1
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +patternProperties:
> +  "^.*@[0-9a-f]+$":

^flash@... if you're that restrictive.

> +    type: object
> +    properties:
> +      compatible:
> +        oneOf:
> +          - const: cfi-flash
> +          - const: jedec,spi-nor

enum is better than oneOf+const.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/renesas-cpg-mssr.h>
> +    #include <dt-bindings/power/r8a77995-sysc.h>
> +
> +    spi@ee200000 {
> +      compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
> +      reg = <0 0xee200000 0 0x200>,
> +            <0 0x08000000 0 0x4000000>,
> +            <0 0xee208000 0 0x100>;
> +      reg-names = "regs", "dirmap", "wbuf";
> +      clocks = <&cpg CPG_MOD 917>;
> +      power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
> +      resets = <&cpg 917>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      flash@0 {
> +        compatible = "jedec,spi-nor";
> +        reg = <0>;
> +        spi-max-frequency = <40000000>;
> +        spi-tx-bus-width = <1>;
> +        spi-rx-bus-width = <1>;
> +      };
> +    };
Sergei Shtylyov May 15, 2020, 8:16 p.m. UTC | #3
On 05/02/2020 12:19 AM, Rob Herring wrote:

>> Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or
>> HyperFlash connected to the SoC to be accessed via the external address
>> space read mode or the manual mode.
>>
>> Document the device tree bindings for the Renesas RPC-IF found in the R-Car
>> gen3 SoCs.
>>
>> Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
>> ---
>> Changes in version 2:
>> - rewrote the bindings in YAML.
>>
>>  Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml |   88 ++++++++++
>>  1 file changed, 88 insertions(+)
>>
> 
> My bot found errors running 'make dt_binding_check' on your patch:
> 
> Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml:  while scanning a simple key
>   in "<unicode string>", line 29, column 9
> could not find expected ':'
>   in "<unicode string>", line 30, column 1
> Documentation/devicetree/bindings/Makefile:11: recipe for target 'Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.example.dts' failed
> make[1]: *** [Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.example.dts] Error 1
> make[1]: *** Waiting for unfinished jobs....
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml: ignoring, error parsing file
> warning: no schema found in file: Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml: ignoring, error parsing file
> warning: no schema found in file: Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
> Makefile:1300: recipe for target 'dt_binding_check' failed
> make: *** [dt_binding_check] Error 2
> 
> See https://patchwork.ozlabs.org/patch/1280942
> 
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
> 
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
> 
> Please check and re-submit.

   As I've said on IRC, I have troubles installing from dt-schema.git:

[headless@wasted renesas-devel]$ pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade 
Collecting git+https://github.com/devicetree-org/dt-schema.git@master
  Cloning https://github.com/devicetree-org/dt-schema.git (to master) to /tmp/pip-4f91j8zd-build
Collecting ruamel.yaml>0.15.69 (from dtschema==2020.6.dev4+g6a941d4)
  Using cached https://files.pythonhosted.org/packages/a6/92/59af3e38227b9cc14520bf1e59516d99ceca53e3b8448094248171e9432b/ruamel.yaml-0.16.10-py2.py3-none-any.whl
Collecting jsonschema>=3.0.1 (from dtschema==2020.6.dev4+g6a941d4)
  Using cached https://files.pythonhosted.org/packages/c5/8f/51e89ce52a085483359217bc72cdbf6e75ee595d5b1d4b5ade40c7e018b8/jsonschema-3.2.0-py2.py3-none-any.whl
Collecting rfc3987 (from dtschema==2020.6.dev4+g6a941d4)
  Using cached https://files.pythonhosted.org/packages/65/d4/f7407c3d15d5ac779c3dd34fbbc6ea2090f77bd7dd12f207ccf881551208/rfc3987-1.3.8-py2.py3-none-any.whl
Collecting ruamel.yaml.clib>=0.1.2 (from ruamel.yaml>0.15.69->dtschema==2020.6.dev4+g6a941d4)
  Using cached https://files.pythonhosted.org/packages/92/28/612085de3fae9f82d62d80255d9f4cf05b1b341db1e180adcf28c1bf748d/ruamel.yaml.clib-0.2.0.tar.gz
No files/directories in /tmp/pip-build-fwtgubpx/ruamel.yaml.clib/pip-egg-info (from PKG-INFO)
You are using pip version 8.0.2, however version 20.1 is available.
You should consider upgrading via the 'pip install --upgrade pip' command.

MBR, Sergei
Sergei Shtylyov May 20, 2020, 2:38 p.m. UTC | #4
On 02.05.2020 0:25, Rob Herring wrote:

>> Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or
>> HyperFlash connected to the SoC to be accessed via the external address
>> space read mode or the manual mode.
>>
>> Document the device tree bindings for the Renesas RPC-IF found in the R-Car
>> gen3 SoCs.
>>
>> Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
>> ---
>> Changes in version 2:
>> - rewrote the bindings in YAML.
>>
>>   Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml |   88 ++++++++++
> 
> Not where we normally put SPI flash controllers...

    RPC-IF is not exactly SPI flash controller, it's bimodal.

MBR, Sergei
Sergei Shtylyov June 1, 2020, 7:18 p.m. UTC | #5
On 05/02/2020 12:25 AM, Rob Herring wrote:

>> Renesas Reduced Pin Count Interface (RPC-IF) allows a SPI flash or
>> HyperFlash connected to the SoC to be accessed via the external address
>> space read mode or the manual mode.
>>
>> Document the device tree bindings for the Renesas RPC-IF found in the R-Car
>> gen3 SoCs.
>>
>> Based on the original patch by Mason Yang <masonccyang@mxic.com.tw>.
>>
>> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
>>
[...]
>> Index: linux/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
>> ===================================================================
>> --- /dev/null
>> +++ linux/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
>> @@ -0,0 +1,88 @@
[...]
>> +patternProperties:
>> +  "^.*@[0-9a-f]+$":
> 
> ^flash@... if you're that restrictive.
> 
>> +    type: object
>> +    properties:
>> +      compatible:
>> +        oneOf:
>> +          - const: cfi-flash
>> +          - const: jedec,spi-nor
> 
> enum is better than oneOf+const.

        - enum:
          - cfi-flash
          - jedec,spi-nor

causes the build error you encountered while trying to merge the last time.
What was I doing wrong?

[...]

MBR, Sergei
diff mbox series

Patch

Index: linux/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
===================================================================
--- /dev/null
+++ linux/Documentation/devicetree/bindings/memory-controllers/renesas,rpc-if.yaml
@@ -0,0 +1,88 @@ 
+# SPDX-License-Identifier: (GPL-2.0)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/renesas,rpc-if.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Reduced Pin Count Interface (RPC-IF)
+
+maintainers:
+  - Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
+
+description: |
+  Renesas RPC-IF allows a SPI flash or HyperFlash connected to the SoC to
+  be accessed via the external address space read mode or the manual mode.
+
+  The flash chip itself should be represented by a subnode of the RPC-IF node.
+  The flash interface is selected based on the "compatible" property of this
+  subnode:
+  - if it contains "jedec,spi-nor", then SPI is used;
+  - if it contains "cfi-flash", then HyperFlash is used.
+
+allOf:
+  - $ref: "/schemas/spi/spi-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+        renesas,r8a77980-rpc-if # device is a part of R8A77980 SoC
+	renesas,r8a77995-rpc-if # device is a part of R8A77995 SoC
+      - enum:
+        renesas,rcar-gen3-rpc-if # a generic R-Car gen3 device
+
+  reg:
+    items:
+       - description: RPC-IF registers
+       - description: direct mapping read mode area
+       - description: write buffer area
+
+  reg-names:
+    items:
+      - const: regs
+      - const: dirmap
+      - const: wbuf
+
+  clocks:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+patternProperties:
+  "^.*@[0-9a-f]+$":
+    type: object
+    properties:
+      compatible:
+        oneOf:
+          - const: cfi-flash
+          - const: jedec,spi-nor
+
+examples:
+  - |
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    #include <dt-bindings/power/r8a77995-sysc.h>
+
+    spi@ee200000 {
+      compatible = "renesas,r8a77995-rpc-if", "renesas,rcar-gen3-rpc-if";
+      reg = <0 0xee200000 0 0x200>,
+            <0 0x08000000 0 0x4000000>,
+            <0 0xee208000 0 0x100>;
+      reg-names = "regs", "dirmap", "wbuf";
+      clocks = <&cpg CPG_MOD 917>;
+      power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
+      resets = <&cpg 917>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      flash@0 {
+        compatible = "jedec,spi-nor";
+        reg = <0>;
+        spi-max-frequency = <40000000>;
+        spi-tx-bus-width = <1>;
+        spi-rx-bus-width = <1>;
+      };
+    };