drivers/spi: Convert printks to pr_<level>

Commit Message

Joe Perches July 21, 2010, 6:55 p.m. UTC

None

Patch

diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index f0a1418..427fa44 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -30,6 +30,8 @@ 
  * - add generic DMA framework support
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/device.h>
@@ -1775,8 +1777,8 @@  pl022_probe(struct amba_device *adev, struct amba_id *id)
 		status = -ENOMEM;
 		goto err_no_ioremap;
 	}
-	printk(KERN_INFO "pl022: mapped registers from 0x%08x to %p\n",
-	       adev->res.start, pl022->virtbase);
+	pr_info("mapped registers from 0x%08llx to %p\n",
+		(unsigned long long)adev->res.start, pl022->virtbase);
 
 	pl022->clk = clk_get(&adev->dev, NULL);
 	if (IS_ERR(pl022->clk)) {
diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c
index 3c9ade6..d95a54e 100644
--- a/drivers/spi/au1550_spi.c
+++ b/drivers/spi/au1550_spi.c
@@ -21,6 +21,8 @@ 
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/slab.h>
@@ -1012,8 +1014,7 @@  static int __init au1550_spi_init(void)
 	if (usedma) {
 		ddma_memid = au1xxx_ddma_add_device(&au1550_spi_mem_dbdev);
 		if (!ddma_memid)
-			printk(KERN_ERR "au1550-spi: cannot add memory"
-					"dbdma device\n");
+			pr_err("cannot add memory dbdma device\n");
 	}
 	return platform_driver_probe(&au1550_spi_drv, au1550_spi_probe);
 }
diff --git a/drivers/spi/dw_spi.c b/drivers/spi/dw_spi.c
index d256cb0..c5d15d4 100644
--- a/drivers/spi/dw_spi.c
+++ b/drivers/spi/dw_spi.c
@@ -490,8 +490,8 @@  static void pump_transfers(unsigned long data)
 		if (transfer->speed_hz != speed) {
 			speed = transfer->speed_hz;
 			if (speed > dws->max_freq) {
-				printk(KERN_ERR "MRST SPI0: unsupported"
-					"freq: %dHz\n", speed);
+				pr_err("MRST SPI0: unsupported freq: %dHz\n",
+				       speed);
 				message->status = -EIO;
 				goto early_exit;
 			}
@@ -525,7 +525,7 @@  static void pump_transfers(unsigned long data)
 					u16_writer : null_writer;
 			break;
 		default:
-			printk(KERN_ERR "MRST SPI0: unsupported bits:"
+			pr_err("MRST SPI0: unsupported bits:"
 				"%db\n", bits);
 			message->status = -EIO;
 			goto early_exit;
diff --git a/drivers/spi/dw_spi_pci.c b/drivers/spi/dw_spi_pci.c
index 1f52755..35f1811 100644
--- a/drivers/spi/dw_spi_pci.c
+++ b/drivers/spi/dw_spi_pci.c
@@ -38,7 +38,7 @@  static int __devinit spi_pci_probe(struct pci_dev *pdev,
 	int pci_bar = 0;
 	int ret;
 
-	printk(KERN_INFO "DW: found PCI SPI controller(ID: %04x:%04x)\n",
+	pr_info("DW: found PCI SPI controller(ID: %04x:%04x)\n",
 		pdev->vendor, pdev->device);
 
 	ret = pci_enable_device(pdev);
diff --git a/drivers/spi/omap_spi_100k.c b/drivers/spi/omap_spi_100k.c
index 9bd1c92..b8b23f2 100644
--- a/drivers/spi/omap_spi_100k.c
+++ b/drivers/spi/omap_spi_100k.c
@@ -425,7 +425,7 @@  static void omap1_spi100k_work(struct work_struct *work)
 	spin_unlock_irq(&spi100k->lock);
 
 	if (status < 0)
-		printk(KERN_WARNING "spi transfer failed with %d\n", status);
+		pr_warning("spi transfer failed with %d\n", status);
 }
 
 static int omap1_spi100k_transfer(struct spi_device *spi, struct spi_message *m)
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index 160d326..445a454 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -154,8 +154,7 @@  static int wait_uwire_csr_flag(u16 mask, u16 val, int might_not_catch)
 		if ((w & mask) == val)
 			break;
 		if (time_after(jiffies, max_jiffies)) {
-			printk(KERN_ERR "%s: timeout. reg=%#06x "
-					"mask=%#06x val=%#06x\n",
+			pr_err("%s: timeout. reg=%#06x mask=%#06x val=%#06x\n",
 			       __func__, w, mask, val);
 			return -1;
 		}
diff --git a/drivers/spi/spi_lm70llp.c b/drivers/spi/spi_lm70llp.c
index 7746a41..ac3a13d 100644
--- a/drivers/spi/spi_lm70llp.c
+++ b/drivers/spi/spi_lm70llp.c
@@ -18,6 +18,8 @@ 
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -202,9 +204,7 @@  static void spi_lm70llp_attach(struct parport *p)
 	int			status;
 
 	if (lm70llp) {
-		printk(KERN_WARNING
-			"%s: spi_lm70llp instance already loaded. Aborting.\n",
-			DRVNAME);
+		pr_warning("instance already loaded. Aborting\n");
 		return;
 	}
 
@@ -252,9 +252,8 @@  static void spi_lm70llp_attach(struct parport *p)
 	 */
 	status = spi_bitbang_start(&pp->bitbang);
 	if (status < 0) {
-		printk(KERN_WARNING
-			"%s: spi_bitbang_start failed with status %d\n",
-			DRVNAME, status);
+		pr_warning("spi_bitbang_start failed with status %d\n",
+			   status);
 		goto out_off_and_release;
 	}
 
@@ -277,14 +276,14 @@  static void spi_lm70llp_attach(struct parport *p)
 	 */
 	pp->info.controller_data = pp;
 	pp->spidev_lm70 = spi_new_device(pp->bitbang.master, &pp->info);
-	if (pp->spidev_lm70)
-		dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n",
-				dev_name(&pp->spidev_lm70->dev));
-	else {
-		printk(KERN_WARNING "%s: spi_new_device failed\n", DRVNAME);
+	if (!pp->spidev_lm70) {
+		pr_warning("spi_new_device failed\n");
 		status = -ENODEV;
 		goto out_bitbang_stop;
 	}
+	dev_dbg(&pp->spidev_lm70->dev, "spidev_lm70 at %s\n",
+		dev_name(&pp->spidev_lm70->dev));
+
 	pp->spidev_lm70->bits_per_word = 8;
 
 	lm70llp = pp;
@@ -302,7 +301,7 @@  out_parport_unreg:
 out_free_master:
 	(void) spi_master_put(master);
 out_fail:
-	pr_info("%s: spi_lm70llp probe fail, status %d\n", DRVNAME, status);
+	pr_info("probe fail, status %d\n", status);
 }
 
 static void spi_lm70llp_detach(struct parport *p)