@@ -153,7 +153,10 @@ config SPI_IMX_VER_0_4
def_bool y if ARCH_MX31
config SPI_IMX_VER_0_7
- def_bool y if ARCH_MX25 || ARCH_MX35
+ def_bool y if ARCH_MX25 || ARCH_MX35 || ARCH_MX51
+
+config SPI_IMX_VER_2_3
+ def_bool y if ARCH_MX51
config SPI_IMX
tristate "Freescale i.MX SPI controllers"
@@ -65,6 +65,7 @@ enum spi_imx_devtype {
SPI_IMX_VER_0_4,
SPI_IMX_VER_0_5,
SPI_IMX_VER_0_7,
+ SPI_IMX_VER_2_3,
SPI_IMX_VER_AUTODETECT,
};
@@ -155,7 +156,7 @@ static unsigned int spi_imx_clkdiv_1(unsigned int fin,
return max;
}
-/* MX1, MX31, MX35 */
+/* MX1, MX31, MX35, MX51 CSPI */
static unsigned int spi_imx_clkdiv_2(unsigned int fin,
unsigned int fspi)
{
@@ -170,6 +171,128 @@ static unsigned int spi_imx_clkdiv_2(unsigned int fin,
return 7;
}
+#define SPI_IMX2_3_CTRL 0x08
+#define SPI_IMX2_3_CTRL_ENABLE (1 << 0)
+#define SPI_IMX2_3_CTRL_XCH (1 << 2)
+#define SPI_IMX2_3_CTRL_MODE(cs) (1 << ((cs) + 4))
+#define SPI_IMX2_3_CTRL_POSTDIV_OFFSET 8
+#define SPI_IMX2_3_CTRL_PREDIV_OFFSET 12
+#define SPI_IMX2_3_CTRL_CS(cs) ((cs) << 18)
+#define SPI_IMX2_3_CTRL_BL_OFFSET 20
+
+#define SPI_IMX2_3_CONFIG 0x0c
+#define SPI_IMX2_3_CONFIG_SCLKPHA(cs) (1 << ((cs) + 0))
+#define SPI_IMX2_3_CONFIG_SCLKPOL(cs) (1 << ((cs) + 4))
+#define SPI_IMX2_3_CONFIG_SBBCTRL(cs) (1 << ((cs) + 8))
+#define SPI_IMX2_3_CONFIG_SSBPOL(cs) (1 << ((cs) + 12))
+
+#define SPI_IMX2_3_INT 0x10
+#define SPI_IMX2_3_INT_TEEN (1 << 0)
+#define SPI_IMX2_3_INT_RREN (1 << 3)
+
+#define SPI_IMX2_3_STAT 0x18
+#define SPI_IMX2_3_STAT_RR (1 << 3)
+
+/* MX51 eCSPI */
+static unsigned int spi_imx2_3_clkdiv(unsigned int fin, unsigned int fspi)
+{
+ /*
+ * there are two 4-bit dividers, the pre-divider divides by
+ * $pre, the post-divider by 2^$post
+ */
+ unsigned int pre, post;
+
+ if (unlikely(fspi > fin))
+ return 0;
+
+ post = fls(fin) - fls(fspi);
+ if (fin > fspi << post)
+ post++;
+
+ /* now we have: (fin <= fspi << post) with post being minimal */
+
+ post = max(4U, post) - 4;
+ if (unlikely(post > 0xf)) {
+ pr_err("%s: cannot set clock freq: %u (base freq: %u)\n",
+ __func__, fspi, fin);
+ return 0xff;
+ }
+
+ pre = DIV_ROUND_UP(fin, fspi << post) - 1;
+
+ pr_debug("%s: fin: %u, fspi: %u, post: %u, pre: %u\n",
+ __func__, fin, fspi, post, pre);
+ return (pre << SPI_IMX2_3_CTRL_PREDIV_OFFSET) |
+ (post << SPI_IMX2_3_CTRL_POSTDIV_OFFSET);
+}
+
+static void __maybe_unused spi_imx2_3_intctrl(struct spi_imx_data *spi_imx, int enable)
+{
+ unsigned val = 0;
+
+ if (enable & MXC_INT_TE)
+ val |= SPI_IMX2_3_INT_TEEN;
+
+ if (enable & MXC_INT_RR)
+ val |= SPI_IMX2_3_INT_RREN;
+
+ writel(val, spi_imx->base + SPI_IMX2_3_INT);
+}
+
+static void __maybe_unused spi_imx2_3_trigger(struct spi_imx_data *spi_imx)
+{
+ u32 reg;
+
+ reg = readl(spi_imx->base + SPI_IMX2_3_CTRL);
+ reg |= SPI_IMX2_3_CTRL_XCH;
+ writel(reg, spi_imx->base + SPI_IMX2_3_CTRL);
+}
+
+static int __maybe_unused spi_imx2_3_config(struct spi_imx_data *spi_imx,
+ struct spi_imx_config *config)
+{
+ u32 ctrl = SPI_IMX2_3_CTRL_ENABLE, cfg = 0;
+
+ /* set master mode */
+ ctrl |= SPI_IMX2_3_CTRL_MODE(config->cs);
+
+ /* set clock speed */
+ ctrl |= spi_imx2_3_clkdiv(spi_imx->spi_clk, config->speed_hz);
+
+ /* set chip select to use */
+ ctrl |= SPI_IMX2_3_CTRL_CS(config->cs);
+
+ ctrl |= (config->bpw - 1) << SPI_IMX2_3_CTRL_BL_OFFSET;
+
+ cfg |= SPI_IMX2_3_CONFIG_SBBCTRL(config->cs);
+
+ if (config->mode & SPI_CPHA)
+ cfg |= SPI_IMX2_3_CONFIG_SCLKPHA(config->cs);
+
+ if (config->mode & SPI_CPOL)
+ cfg |= SPI_IMX2_3_CONFIG_SCLKPOL(config->cs);
+
+ if (config->mode & SPI_CS_HIGH)
+ cfg |= SPI_IMX2_3_CONFIG_SSBPOL(config->cs);
+
+ writel(ctrl, spi_imx->base + SPI_IMX2_3_CTRL);
+ writel(cfg, spi_imx->base + SPI_IMX2_3_CONFIG);
+
+ return 0;
+}
+
+static int __maybe_unused spi_imx2_3_rx_available(struct spi_imx_data *spi_imx)
+{
+ return readl(spi_imx->base + SPI_IMX2_3_STAT) & SPI_IMX2_3_STAT_RR;
+}
+
+static void __maybe_unused spi_imx2_3_reset(struct spi_imx_data *spi_imx)
+{
+ /* drain receive buffer */
+ while (spi_imx2_3_rx_available(spi_imx))
+ readl(spi_imx->base + MXC_CSPIRXDATA);
+}
+
#define MX31_INTREG_TEEN (1 << 0)
#define MX31_INTREG_RREN (1 << 3)
@@ -447,6 +570,15 @@ static struct spi_imx_devtype_data spi_imx_devtype_data[] __devinitdata = {
.reset = spi_imx0_4_reset,
},
#endif
+#ifdef CONFIG_SPI_IMX_VER_2_3
+ [SPI_IMX_VER_2_3] = {
+ .intctrl = spi_imx2_3_intctrl,
+ .config = spi_imx2_3_config,
+ .trigger = spi_imx2_3_trigger,
+ .rx_available = spi_imx2_3_rx_available,
+ .reset = spi_imx2_3_reset,
+ },
+#endif
};
static void spi_imx_chipselect(struct spi_device *spi, int is_active)
@@ -603,6 +735,12 @@ static struct platform_device_id spi_imx_devtype[] = {
.name = "imx35-cspi",
.driver_data = SPI_IMX_VER_0_7,
}, {
+ .name = "imx51-cspi",
+ .driver_data = SPI_IMX_VER_0_7,
+ }, {
+ .name = "imx51-ecspi",
+ .driver_data = SPI_IMX_VER_2_3,
+ }, {
/* sentinel */
}
};