@@ -396,6 +396,10 @@ config SPI_DW_PCI
tristate "PCI interface driver for DW SPI core"
depends on SPI_DESIGNWARE && PCI
+config SPI_DW_MID_DMA
+ bool "DMA support for DW SPI controller on Intel Moorestown platform"
+ depends on SPI_DW_PCI && INTEL_MID_DMAC
+
config SPI_DW_MMIO
tristate "Memory-mapped io interface driver for DW SPI core"
depends on SPI_DESIGNWARE && HAVE_CLK
@@ -17,7 +17,8 @@ obj-$(CONFIG_SPI_BUTTERFLY) += spi_butterfly.o
obj-$(CONFIG_SPI_COLDFIRE_QSPI) += coldfire_qspi.o
obj-$(CONFIG_SPI_DAVINCI) += davinci_spi.o
obj-$(CONFIG_SPI_DESIGNWARE) += dw_spi.o
-obj-$(CONFIG_SPI_DW_PCI) += dw_spi_pci.o
+obj-$(CONFIG_SPI_DW_PCI) += dw_spi_midpci.o
+dw_spi_midpci-objs := dw_spi_pci.o dw_spi_mid.o
obj-$(CONFIG_SPI_DW_MMIO) += dw_spi_mmio.o
obj-$(CONFIG_SPI_EP93XX) += ep93xx_spi.o
obj-$(CONFIG_SPI_GPIO) += spi_gpio.o
@@ -288,8 +288,10 @@ static void *next_transfer(struct dw_spi *dws)
*/
static int map_dma_buffers(struct dw_spi *dws)
{
- if (!dws->cur_msg->is_dma_mapped || !dws->dma_inited
- || !dws->cur_chip->enable_dma)
+ if (!dws->cur_msg->is_dma_mapped
+ || !dws->dma_inited
+ || !dws->cur_chip->enable_dma
+ || !dws->dma_ops)
return 0;
if (dws->cur_transfer->tx_dma)
@@ -341,7 +343,7 @@ static void int_error_stop(struct dw_spi *dws, const char *msg)
tasklet_schedule(&dws->pump_transfers);
}
-static void transfer_complete(struct dw_spi *dws)
+void dw_spi_xfer_done(struct dw_spi *dws)
{
/* Update total byte transfered return count actual bytes read */
dws->cur_msg->actual_length += dws->len;
@@ -356,6 +358,7 @@ static void transfer_complete(struct dw_spi *dws)
} else
tasklet_schedule(&dws->pump_transfers);
}
+EXPORT_SYMBOL_GPL(dw_spi_xfer_done);
static irqreturn_t interrupt_transfer(struct dw_spi *dws)
{
@@ -387,7 +390,7 @@ static irqreturn_t interrupt_transfer(struct dw_spi *dws)
if (dws->tx_end > dws->tx)
spi_umask_intr(dws, SPI_INT_TXEI);
else
- transfer_complete(dws);
+ dw_spi_xfer_done(dws);
}
return IRQ_HANDLED;
@@ -422,11 +425,7 @@ static void poll_transfer(struct dw_spi *dws)
*/
dws->read(dws);
- transfer_complete(dws);
-}
-
-static void dma_transfer(struct dw_spi *dws, int cs_change)
-{
+ dw_spi_xfer_done(dws);
}
static void pump_transfers(unsigned long data)
@@ -608,7 +607,7 @@ static void pump_transfers(unsigned long data)
}
if (dws->dma_mapped)
- dma_transfer(dws, cs_change);
+ dws->dma_ops->dma_transfer(dws, cs_change);
if (chip->poll_mode)
poll_transfer(dws);
@@ -904,11 +903,17 @@ int __devinit dw_spi_add_host(struct dw_spi *dws)
master->setup = dw_spi_setup;
master->transfer = dw_spi_transfer;
- dws->dma_inited = 0;
-
/* Basic HW init */
spi_hw_init(dws);
+ if (dws->dma_ops && dws->dma_ops->dma_init) {
+ ret = dws->dma_ops->dma_init(dws);
+ if (ret) {
+ dev_warn(&master->dev, "DMA init failed\n");
+ dws->dma_inited = 0;
+ }
+ }
+
/* Initial and start queue */
ret = init_queue(dws);
if (ret) {
@@ -933,6 +938,8 @@ int __devinit dw_spi_add_host(struct dw_spi *dws)
err_queue_alloc:
destroy_queue(dws);
+ if (dws->dma_ops && dws->dma_ops->dma_exit)
+ dws->dma_ops->dma_exit(dws);
err_diable_hw:
spi_enable_chip(dws, 0);
free_irq(dws->irq, dws);
@@ -957,6 +964,8 @@ void __devexit dw_spi_remove_host(struct dw_spi *dws)
dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not "
"complete, message memory not freed\n");
+ if (dws->dma_ops && dws->dma_ops->dma_exit)
+ dws->dma_ops->dma_exit(dws);
spi_enable_chip(dws, 0);
/* Disable clk */
spi_set_clk(dws, 0);
new file mode 100644
@@ -0,0 +1,224 @@
+/*
+ * dw_spi_mid.c - special handling for DW core on Intel MID platform
+ *
+ * Copyright (c) 2009, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation,
+ * Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/dw_spi.h>
+
+#ifdef CONFIG_SPI_DW_MID_DMA
+#include <linux/intel_mid_dma.h>
+#include <linux/pci.h>
+
+struct mid_dma {
+ struct intel_mid_dma_slave dmas_tx;
+ struct intel_mid_dma_slave dmas_rx;
+};
+
+static bool mid_spi_dma_chan_filter(struct dma_chan *chan, void *param)
+{
+ struct dw_spi *dws = param;
+
+ return dws->dmac && (&dws->dmac->dev == chan->device->dev);
+}
+
+static int mid_spi_dma_init(struct dw_spi *dws)
+{
+ struct mid_dma *dw_dma = dws->dma_priv;
+ struct intel_mid_dma_slave *rxs, *txs;
+ dma_cap_mask_t mask;
+
+ /*
+ * Get pci device for DMA controller, currently it could only
+ * be the DMA controller of either Moorestown or Medfield
+ */
+ dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0813, NULL);
+ if (!dws->dmac)
+ dws->dmac = pci_get_device(PCI_VENDOR_ID_INTEL, 0x0827, NULL);
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ /* 1. Init rx channel */
+ dws->rxchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+ if (!dws->rxchan)
+ goto err_exit;
+ rxs = &dw_dma->dmas_rx;
+ rxs->hs_mode = LNW_DMA_HW_HS;
+ rxs->cfg_mode = LNW_DMA_PER_TO_MEM;
+ dws->rxchan->private = rxs;
+
+ /* 2. Init tx channel */
+ dws->txchan = dma_request_channel(mask, mid_spi_dma_chan_filter, dws);
+ if (!dws->txchan)
+ goto free_rxchan;
+ txs = &dw_dma->dmas_tx;
+ txs->hs_mode = LNW_DMA_HW_HS;
+ txs->cfg_mode = LNW_DMA_MEM_TO_PER;
+ dws->txchan->private = txs;
+
+ dws->dma_inited = 1;
+ return 0;
+
+free_rxchan:
+ dma_release_channel(dws->rxchan);
+err_exit:
+ return -1;
+
+}
+
+static void mid_spi_dma_exit(struct dw_spi *dws)
+{
+ dma_release_channel(dws->txchan);
+ dma_release_channel(dws->rxchan);
+}
+
+/*
+ * dws->dma_chan_done is cleared before the dma transfer starts,
+ * callback for rx/tx channel will each increment it by 1.
+ * Reaching 2 means the whole spi transaction is done.
+ */
+static void dw_spi_dma_done(void *arg)
+{
+ struct dw_spi *dws = arg;
+
+ if (++dws->dma_chan_done != 2)
+ return;
+ dw_spi_xfer_done(dws);
+}
+
+static int mid_spi_dma_transfer(struct dw_spi *dws, int cs_change)
+{
+ struct dma_async_tx_descriptor *txdesc = NULL, *rxdesc = NULL;
+ struct dma_chan *txchan, *rxchan;
+ struct dma_slave_config txconf, rxconf;
+ u16 dma_ctrl = 0;
+
+ /* 1. setup DMA related registers */
+ if (cs_change) {
+ spi_enable_chip(dws, 0);
+ dw_writew(dws, dmardlr, 0xf);
+ dw_writew(dws, dmatdlr, 0x10);
+ if (dws->tx_dma)
+ dma_ctrl |= 0x2;
+ if (dws->rx_dma)
+ dma_ctrl |= 0x1;
+ dw_writew(dws, dmacr, dma_ctrl);
+ spi_enable_chip(dws, 1);
+ }
+
+ dws->dma_chan_done = 0;
+ txchan = dws->txchan;
+ rxchan = dws->rxchan;
+
+ /* 2. Prepare the TX dma transfer */
+ txconf.direction = DMA_TO_DEVICE;
+ txconf.dst_addr = dws->dma_addr;
+ txconf.dst_maxburst = LNW_DMA_MSIZE_16;
+ txconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ txconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+ txchan->device->device_control(txchan, DMA_SLAVE_CONFIG,
+ (unsigned long) &txconf);
+
+ memset(&dws->tx_sgl, 0, sizeof(dws->tx_sgl));
+ dws->tx_sgl.dma_address = dws->tx_dma;
+ dws->tx_sgl.length = dws->len;
+
+ txdesc = txchan->device->device_prep_slave_sg(txchan,
+ &dws->tx_sgl,
+ 1,
+ DMA_TO_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
+ txdesc->callback = dw_spi_dma_done;
+ txdesc->callback_param = dws;
+
+ /* 3. Prepare the RX dma transfer */
+ rxconf.direction = DMA_FROM_DEVICE;
+ rxconf.src_addr = dws->dma_addr;
+ rxconf.src_maxburst = LNW_DMA_MSIZE_16;
+ rxconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ rxconf.src_addr_width = DMA_SLAVE_BUSWIDTH_2_BYTES;
+
+ rxchan->device->device_control(rxchan, DMA_SLAVE_CONFIG,
+ (unsigned long) &rxconf);
+
+ memset(&dws->rx_sgl, 0, sizeof(dws->rx_sgl));
+ dws->rx_sgl.dma_address = dws->rx_dma;
+ dws->rx_sgl.length = dws->len;
+
+ rxdesc = rxchan->device->device_prep_slave_sg(rxchan,
+ &dws->rx_sgl,
+ 1,
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_COMPL_SKIP_DEST_UNMAP);
+ rxdesc->callback = dw_spi_dma_done;
+ rxdesc->callback_param = dws;
+
+ /* rx must be started before tx due to spi instinct */
+ rxdesc->tx_submit(rxdesc);
+ txdesc->tx_submit(txdesc);
+ return 0;
+}
+
+static struct dw_spi_dma_ops mid_dma_ops = {
+ .dma_init = mid_spi_dma_init,
+ .dma_exit = mid_spi_dma_exit,
+ .dma_transfer = mid_spi_dma_transfer,
+};
+#endif
+
+/* Some specific info for SPI0 controller on Moorestown */
+
+/* HW info for MRST CLk Control Unit, one 32b reg */
+#define MRST_SPI_CLK_BASE 100000000 /* 100m */
+#define MRST_CLK_SPI0_REG 0xff11d86c
+#define CLK_SPI_BDIV_OFFSET 0
+#define CLK_SPI_BDIV_MASK 0x00000007
+#define CLK_SPI_CDIV_OFFSET 9
+#define CLK_SPI_CDIV_MASK 0x00000e00
+#define CLK_SPI_DISABLE_OFFSET 8
+
+int dw_spi_mid_init(struct dw_spi *dws)
+{
+ u32 *clk_reg, clk_cdiv;
+
+ clk_reg = ioremap_nocache(MRST_CLK_SPI0_REG, 16);
+ if (!clk_reg)
+ return -ENOMEM;
+
+ /* get SPI controller operating freq info */
+ clk_cdiv = (readl(clk_reg) & CLK_SPI_CDIV_MASK) >> CLK_SPI_CDIV_OFFSET;
+ dws->max_freq = MRST_SPI_CLK_BASE / (clk_cdiv + 1);
+ iounmap(clk_reg);
+
+ dws->num_cs = 16;
+ dws->fifo_len = 40; /* FIFO has 40 words buffer */
+
+#ifdef CONFIG_SPI_DW_MID_DMA
+ dws->dma_priv = kzalloc(sizeof(struct mid_dma), GFP_KERNEL);
+ if (!dws->dma_priv)
+ return -ENOMEM;
+ dws->dma_ops = &mid_dma_ops;
+#endif
+ return 0;
+}
+
@@ -1,5 +1,5 @@
/*
- * mrst_spi_pci.c - PCI interface driver for DW SPI Core
+ * dw_spi_pci.c - PCI interface driver for DW SPI Core
*
* Copyright (c) 2009, Intel Corporation.
*
@@ -26,8 +26,8 @@
#define DRIVER_NAME "dw_spi_pci"
struct dw_spi_pci {
- struct pci_dev *pdev;
- struct dw_spi dws;
+ struct pci_dev *pdev;
+ struct dw_spi dws;
};
static int __devinit spi_pci_probe(struct pci_dev *pdev,
@@ -72,9 +72,17 @@ static int __devinit spi_pci_probe(struct pci_dev *pdev,
dws->parent_dev = &pdev->dev;
dws->bus_num = 0;
dws->num_cs = 4;
- dws->max_freq = 25000000; /* for Moorestwon */
dws->irq = pdev->irq;
- dws->fifo_len = 40; /* FIFO has 40 words buffer */
+
+ /*
+ * Specific handling for Intel MID paltforms, like dma setup,
+ * clock rate, FIFO depth.
+ */
+ if (pdev->device == 0x0800) {
+ ret = dw_spi_mid_init(dws);
+ if (ret)
+ goto err_unmap;
+ }
ret = dw_spi_add_host(dws);
if (ret)
@@ -140,7 +148,7 @@ static int spi_resume(struct pci_dev *pdev)
#endif
static const struct pci_device_id pci_ids[] __devinitdata = {
- /* Intel Moorestown platform SPI controller 0 */
+ /* Intel MID platform SPI controller 0 */
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x0800) },
{},
};
@@ -1,5 +1,6 @@
#ifndef DW_SPI_HEADER_H
#define DW_SPI_HEADER_H
+
#include <linux/io.h>
/* Bit fields in CTRLR0 */
@@ -82,6 +83,13 @@ struct dw_spi_reg {
though only low 16 bits matters */
} __packed;
+struct dw_spi;
+struct dw_spi_dma_ops {
+ int (*dma_init)(struct dw_spi *dws);
+ void (*dma_exit)(struct dw_spi *dws);
+ int (*dma_transfer)(struct dw_spi *dws, int cs_change);
+};
+
struct dw_spi {
struct spi_master *master;
struct spi_device *cur_dev;
@@ -136,13 +144,15 @@ struct dw_spi {
/* Dma info */
int dma_inited;
struct dma_chan *txchan;
+ struct scatterlist tx_sgl;
struct dma_chan *rxchan;
- int txdma_done;
- int rxdma_done;
- u64 tx_param;
- u64 rx_param;
+ struct scatterlist rx_sgl;
+ int dma_chan_done;
struct device *dma_dev;
- dma_addr_t dma_addr;
+ dma_addr_t dma_addr; /* phy address of the Data register */
+ struct dw_spi_dma_ops *dma_ops;
+ void *dma_priv; /* platform relate info */
+ struct pci_dev *dmac;
/* Bus interface info */
void *priv;
@@ -216,4 +226,8 @@ extern int dw_spi_add_host(struct dw_spi *dws);
extern void dw_spi_remove_host(struct dw_spi *dws);
extern int dw_spi_suspend_host(struct dw_spi *dws);
extern int dw_spi_resume_host(struct dw_spi *dws);
+extern void dw_spi_xfer_done(struct dw_spi *dws);
+
+/* platform related setup */
+extern int dw_spi_mid_init(struct dw_spi *dws); /* Intel MID platforms */
#endif /* DW_SPI_HEADER_H */