@@ -508,9 +508,10 @@ static void giveback(struct pl022 *pl022)
msg->state = NULL;
if (msg->complete)
msg->complete(msg->context);
- /* This message is completed, so let's turn off the clocks! */
+ /* This message is completed, so let's turn off the clocks & power */
clk_disable(pl022->clk);
amba_pclk_disable(pl022->adev);
+ amba_vcore_disable(pl022->adev);
}
/**
@@ -1475,9 +1476,11 @@ static void pump_messages(struct work_struct *work)
/* Setup the SPI using the per chip configuration */
pl022->cur_chip = spi_get_ctldata(pl022->cur_msg->spi);
/*
- * We enable the clocks here, then the clocks will be disabled when
- * giveback() is called in each method (poll/interrupt/DMA)
+ * We enable the core voltage and clocks here, then the clocks
+ * and core will be disabled when giveback() is called in each method
+ * (poll/interrupt/DMA)
*/
+ amba_vcore_enable(pl022->adev);
amba_pclk_enable(pl022->adev);
clk_enable(pl022->clk);
restore_state(pl022);
@@ -2123,8 +2126,12 @@ pl022_probe(struct amba_device *adev, struct amba_id *id)
goto err_spi_register;
}
dev_dbg(dev, "probe succeded\n");
- /* Disable the silicon block pclk and clock it when needed */
+ /*
+ * Disable the silicon block pclk and any voltage domain and just
+ * power it up and clock it when it's needed
+ */
amba_pclk_disable(adev);
+ amba_vcore_disable(adev);
return 0;
err_spi_register:
@@ -2189,9 +2196,11 @@ static int pl022_suspend(struct amba_device *adev, pm_message_t state)
return status;
}
+ amba_vcore_enable(adev);
amba_pclk_enable(adev);
load_ssp_default_config(pl022);
amba_pclk_disable(adev);
+ amba_vcore_disable(adev);
dev_dbg(&adev->dev, "suspended\n");
return 0;
}