spi/bcm63xx: remove unused speed_hz variable

Commit Message

Jonas Gorski April 6, 2013, 11:18 a.m. UTC

speed_hz is a write only member, so we can safely remove it and its
generation. Also fixes the missing clk_put after getting the periph
clock.

Signed-off-by: Jonas Gorski <[e-mail]>
---

This patch applies cleanly to both spi-next and mips-next, and I don't
have any preference into which tree it should go. Maybe mips, as it
"wins" in terms of removed lines ;-).

 arch/mips/bcm63xx/dev-spi.c                          |   11 -----------
 arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h |    1 -
 drivers/spi/spi-bcm63xx.c                            |    2 --
 3 files changed, 14 deletions(-)

Patch

diff --git a/arch/mips/bcm63xx/dev-spi.c b/arch/mips/bcm63xx/dev-spi.c
index f1c9c3e..e97fd60 100644
--- a/arch/mips/bcm63xx/dev-spi.c
+++ b/arch/mips/bcm63xx/dev-spi.c
@@ -85,20 +85,9 @@  static struct platform_device bcm63xx_spi_device = {
 
 int __init bcm63xx_spi_register(void)
 {
-	struct clk *periph_clk;
-
 	if (BCMCPU_IS_6328() || BCMCPU_IS_6345())
 		return -ENODEV;
 
-	periph_clk = clk_get(NULL, "periph");
-	if (IS_ERR(periph_clk)) {
-		pr_err("unable to get periph clock\n");
-		return -ENODEV;
-	}
-
-	/* Set bus frequency */
-	spi_pdata.speed_hz = clk_get_rate(periph_clk);
-
 	spi_resources[0].start = bcm63xx_regset_address(RSET_SPI);
 	spi_resources[0].end = spi_resources[0].start;
 	spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI);
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
index c9bae13..b0184cf 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_dev_spi.h
@@ -13,7 +13,6 @@  struct bcm63xx_spi_pdata {
 	unsigned int	msg_ctl_width;
 	int		bus_num;
 	int		num_chipselect;
-	u32		speed_hz;
 };
 
 enum bcm63xx_regs_spi {
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c
index 973099b..a4ec5f4 100644
--- a/drivers/spi/spi-bcm63xx.c
+++ b/drivers/spi/spi-bcm63xx.c
@@ -46,7 +46,6 @@  struct bcm63xx_spi {
 	int			irq;
 
 	/* Platform data */
-	u32			speed_hz;
 	unsigned		fifo_size;
 	unsigned int		msg_type_shift;
 	unsigned int		msg_ctl_width;
@@ -436,7 +435,6 @@  static int bcm63xx_spi_probe(struct platform_device *pdev)
 	master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
 	master->transfer_one_message = bcm63xx_spi_transfer_one;
 	master->mode_bits = MODEBITS;
-	bs->speed_hz = pdata->speed_hz;
 	bs->msg_type_shift = pdata->msg_type_shift;
 	bs->msg_ctl_width = pdata->msg_ctl_width;
 	bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));