diff mbox

[v4,1/2] spi:fsl-dspi:convert to use regmap and big-endian supports

Message ID 1392190146-18852-1-git-send-email-b44548@freescale.com (mailing list archive)
State Accepted
Commit 1acbdeb92c87fc18eade0815dedc257fe45b88b7
Headers show

Commit Message

Chao Fu Feb. 12, 2014, 7:29 a.m. UTC 
From: Chao Fu <B44548@freescale.com>

Freescale DSPI module will have two endianess in different platform,
but ARM is little endian. So when DSPI in big endian, core in little endian,
readl and writel can not adjust R/W register in this condition.
This patch will remove general readl/writel, and import regmap mechanism.
Data endian will be transfered in regmap APIs.

Documents: dspi add bool "big-endian" in dts node if DSPI module
work in big endian.

Signed-off-by: Chao Fu      <b44548@freescale.com>
---
Change in v4:
Add Kconfig select REGMAP_MMIO.
Change in v3:
Remove readl and wrirel, and import regmap mechanism to R/W module registers.

Change in v2:
Make dspi_readx dspi_writex as inline functions.
Modify the issue of indentation in function is_double_byte_mode.
Add description about big endian in bindings document.

 .../devicetree/bindings/spi/spi-fsl-dspi.txt       |  2 +
 drivers/spi/Kconfig                                |  1 +
 drivers/spi/spi-fsl-dspi.c                         | 80 ++++++++++++++--------
 3 files changed, 56 insertions(+), 27 deletions(-)

Comments

Xiubo Li Feb. 14, 2014, 7:33 a.m. UTC | #1 
> @@ -435,12 +441,20 @@ static const struct dev_pm_ops dspi_pm = {
>  	SET_SYSTEM_SLEEP_PM_OPS(dspi_suspend, dspi_resume)
>  };
> 
> +static struct regmap_config dspi_regmap_config = {
> +	.reg_bits = 32,
> +	.val_bits = 32,
> +	.reg_stride = 4,
> +	.max_register = 0x88,
> +};
> +


If needed, you should add the callbacks like:
	.readable_reg,
	.writeable_reg,
	.volatile_reg,

Otherwise, it looks fine to me, for both patches:
Reviewed-by: Xiubo Li <Li.Xiubo@freescale.com>




--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Mark Brown Feb. 16, 2014, 1:14 a.m. UTC | #2 
On Fri, Feb 14, 2014 at 07:33:17AM +0000, Li.Xiubo@freescale.com wrote:

> If needed, you should add the callbacks like:
> 	.readable_reg,
> 	.writeable_reg,
> 	.volatile_reg,

They're not 100% needed unless you have a cache in which case
volatile_reg() becomes important but it's definitely good practice to
add them.
Mark Brown Feb. 16, 2014, 1:16 a.m. UTC | #3 
On Wed, Feb 12, 2014 at 03:29:05PM +0800, Chao Fu wrote:
> From: Chao Fu <B44548@freescale.com>
> 
> Freescale DSPI module will have two endianess in different platform,
> but ARM is little endian. So when DSPI in big endian, core in little endian,
> readl and writel can not adjust R/W register in this condition.
> This patch will remove general readl/writel, and import regmap mechanism.
> Data endian will be transfered in regmap APIs.

Applied both, thanks.
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
index a1fb303..5376de4 100644
--- a/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
+++ b/Documentation/devicetree/bindings/spi/spi-fsl-dspi.txt
@@ -10,6 +10,7 @@  Required properties:
 - pinctrl-names: must contain a "default" entry.
 - spi-num-chipselects : the number of the chipselect signals.
 - bus-num : the slave chip chipselect signal number.
+- big-endian : if DSPI modudle is big endian, the bool will be set in node.
 Example:
 
 dspi0@4002c000 {
@@ -24,6 +25,7 @@  dspi0@4002c000 {
 	bus-num = <0>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_dspi0_1>;
+	big-endian;
 	status = "okay";
 
 	sflash: at26df081a@0 {
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index ecd8f06..6554bd0 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -270,6 +270,7 @@  config SPI_FSL_SPI
 config SPI_FSL_DSPI
 	tristate "Freescale DSPI controller"
 	select SPI_BITBANG
+	select REGMAP_MMIO
 	depends on SOC_VF610 || COMPILE_TEST
 	help
 	  This enables support for the Freescale DSPI controller in master
diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c
index ec79f72..fb16575 100644
--- a/drivers/spi/spi-fsl-dspi.c
+++ b/drivers/spi/spi-fsl-dspi.c
@@ -18,6 +18,7 @@ 
 #include <linux/interrupt.h>
 #include <linux/errno.h>
 #include <linux/platform_device.h>
+#include <linux/regmap.h>
 #include <linux/sched.h>
 #include <linux/delay.h>
 #include <linux/io.h>
@@ -108,7 +109,7 @@  struct fsl_dspi {
 	struct spi_bitbang	bitbang;
 	struct platform_device	*pdev;
 
-	void __iomem		*base;
+	struct regmap		*regmap;
 	int			irq;
 	struct clk 		*clk;
 
@@ -129,18 +130,11 @@  struct fsl_dspi {
 
 static inline int is_double_byte_mode(struct fsl_dspi *dspi)
 {
-	return ((readl(dspi->base + SPI_CTAR(dspi->cs)) & SPI_FRAME_BITS_MASK)
-			== SPI_FRAME_BITS(8)) ? 0 : 1;
-}
+	unsigned int val;
 
-static void set_bit_mode(struct fsl_dspi *dspi, unsigned char bits)
-{
-	u32 temp;
+	regmap_read(dspi->regmap, SPI_CTAR(dspi->cs), &val);
 
-	temp = readl(dspi->base + SPI_CTAR(dspi->cs));
-	temp &= ~SPI_FRAME_BITS_MASK;
-	temp |= SPI_FRAME_BITS(bits);
-	writel(temp, dspi->base + SPI_CTAR(dspi->cs));
+	return ((val & SPI_FRAME_BITS_MASK) == SPI_FRAME_BITS(8)) ? 0 : 1;
 }
 
 static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
@@ -188,7 +182,8 @@  static int dspi_transfer_write(struct fsl_dspi *dspi)
 	 */
 	if (tx_word && (dspi->len == 1)) {
 		dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
-		set_bit_mode(dspi, 8);
+		regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs),
+				SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8));
 		tx_word = 0;
 	}
 
@@ -238,7 +233,8 @@  static int dspi_transfer_write(struct fsl_dspi *dspi)
 			dspi_pushr |= SPI_PUSHR_CTCNT; /* clear counter */
 		}
 
-		writel(dspi_pushr, dspi->base + SPI_PUSHR);
+		regmap_write(dspi->regmap, SPI_PUSHR, dspi_pushr);
+
 		tx_count++;
 	}
 
@@ -253,17 +249,23 @@  static int dspi_transfer_read(struct fsl_dspi *dspi)
 	while ((dspi->rx < dspi->rx_end)
 			&& (rx_count < DSPI_FIFO_SIZE)) {
 		if (rx_word) {
+			unsigned int val;
+
 			if ((dspi->rx_end - dspi->rx) == 1)
 				break;
 
-			d = SPI_POPR_RXDATA(readl(dspi->base + SPI_POPR));
+			regmap_read(dspi->regmap, SPI_POPR, &val);
+			d = SPI_POPR_RXDATA(val);
 
 			if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
 				*(u16 *)dspi->rx = d;
 			dspi->rx += 2;
 
 		} else {
-			d = SPI_POPR_RXDATA(readl(dspi->base + SPI_POPR));
+			unsigned int val;
+
+			regmap_read(dspi->regmap, SPI_POPR, &val);
+			d = SPI_POPR_RXDATA(val);
 			if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
 				*(u8 *)dspi->rx = d;
 			dspi->rx++;
@@ -295,13 +297,13 @@  static int dspi_txrx_transfer(struct spi_device *spi, struct spi_transfer *t)
 	if (!dspi->tx)
 		dspi->dataflags |= TRAN_STATE_TX_VOID;
 
-	writel(dspi->cur_chip->mcr_val, dspi->base + SPI_MCR);
-	writel(dspi->cur_chip->ctar_val, dspi->base + SPI_CTAR(dspi->cs));
-	writel(SPI_RSER_EOQFE, dspi->base + SPI_RSER);
+	regmap_write(dspi->regmap, SPI_MCR, dspi->cur_chip->mcr_val);
+	regmap_write(dspi->regmap, SPI_CTAR(dspi->cs), dspi->cur_chip->ctar_val);
+	regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
 
 	if (t->speed_hz)
-		writel(dspi->cur_chip->ctar_val,
-				dspi->base + SPI_CTAR(dspi->cs));
+		regmap_write(dspi->regmap, SPI_CTAR(dspi->cs),
+				dspi->cur_chip->ctar_val);
 
 	dspi_transfer_write(dspi);
 
@@ -315,7 +317,9 @@  static int dspi_txrx_transfer(struct spi_device *spi, struct spi_transfer *t)
 static void dspi_chipselect(struct spi_device *spi, int value)
 {
 	struct fsl_dspi *dspi = spi_master_get_devdata(spi->master);
-	u32 pushr = readl(dspi->base + SPI_PUSHR);
+	unsigned int pushr;
+
+	regmap_read(dspi->regmap, SPI_PUSHR, &pushr);
 
 	switch (value) {
 	case BITBANG_CS_ACTIVE:
@@ -326,7 +330,7 @@  static void dspi_chipselect(struct spi_device *spi, int value)
 		break;
 	}
 
-	writel(pushr, dspi->base + SPI_PUSHR);
+	regmap_write(dspi->regmap, SPI_PUSHR, pushr);
 }
 
 static int dspi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
@@ -382,13 +386,15 @@  static irqreturn_t dspi_interrupt(int irq, void *dev_id)
 {
 	struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id;
 
-	writel(SPI_SR_EOQF, dspi->base + SPI_SR);
+	regmap_write(dspi->regmap, SPI_SR, SPI_SR_EOQF);
 
 	dspi_transfer_read(dspi);
 
 	if (!dspi->len) {
 		if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM)
-			set_bit_mode(dspi, 16);
+			regmap_update_bits(dspi->regmap, SPI_CTAR(dspi->cs),
+				SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(16));
+
 		dspi->waitflags = 1;
 		wake_up_interruptible(&dspi->waitq);
 	} else {
@@ -435,12 +441,20 @@  static const struct dev_pm_ops dspi_pm = {
 	SET_SYSTEM_SLEEP_PM_OPS(dspi_suspend, dspi_resume)
 };
 
+static struct regmap_config dspi_regmap_config = {
+	.reg_bits = 32,
+	.val_bits = 32,
+	.reg_stride = 4,
+	.max_register = 0x88,
+};
+
 static int dspi_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct spi_master *master;
 	struct fsl_dspi *dspi;
 	struct resource *res;
+	void __iomem *base;
 	int ret = 0, cs_num, bus_num;
 
 	master = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
@@ -475,12 +489,24 @@  static int dspi_probe(struct platform_device *pdev)
 	master->bus_num = bus_num;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	dspi->base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(dspi->base)) {
-		ret = PTR_ERR(dspi->base);
+	base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(base)) {
+		ret = PTR_ERR(base);
 		goto out_master_put;
 	}
 
+	dspi_regmap_config.lock_arg = dspi;
+	dspi_regmap_config.val_format_endian =
+		of_property_read_bool(np, "big-endian")
+			? REGMAP_ENDIAN_BIG : REGMAP_ENDIAN_DEFAULT;
+	dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, "dspi", base,
+						&dspi_regmap_config);
+	if (IS_ERR(dspi->regmap)) {
+		dev_err(&pdev->dev, "failed to init regmap: %ld\n",
+				PTR_ERR(dspi->regmap));
+		return PTR_ERR(dspi->regmap);
+	}
+
 	dspi->irq = platform_get_irq(pdev, 0);
 	if (dspi->irq < 0) {
 		dev_err(&pdev->dev, "can't get platform irq\n");