new file mode 100644
@@ -0,0 +1,31 @@
+Cadence SPI controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible : Should be "cdns,spi-r1p6" or "xlnx,zynq-spi-r1p6".
+- reg : Physical base address and size of SPI registers map.
+- interrupts : Property with a value describing the interrupt
+ number.
+- interrupt-parent : Must be core interrupt controller
+- clock-names : List of input clock names - "ref_clk", "pclk"
+ (See clock bindings for details).
+- clocks : Clock phandles (see clock bindings for details).
+
+Optional properties:
+- num-cs : Number of chip selects used.
+ If a decoder is used, this will be the number of
+ chip selects after the decoder.
+- is-decoded-cs : Flag to indicate whether decoder is used or not.
+
+Example:
+
+ spi@e0007000 {
+ compatible = "xlnx,zynq-spi-r1p6";
+ clock-names = "ref_clk", "pclk";
+ clocks = <&clkc 26>, <&clkc 35>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 49 4>;
+ num-cs = <4>;
+ is-decoded-cs = <0>;
+ reg = <0xe0007000 0x1000>;
+ } ;
Add spi-cadence bindings documentation. Signed-off-by: Harini Katakam <harinik@xilinx.com> --- v3 changes: - Remove /bits/ 16 from num-cs property in example. - Add is-decoded-cs optional property and add to description of num-cs. v2 changes: - Separate patch for bindings. - Add xilinx compatible string; Make compatible string first in the node. - Use property name num-cs. Make this property optional. --- .../devicetree/bindings/spi/spi-cadence.txt | 31 ++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-cadence.txt