@@ -480,7 +480,6 @@ static int rspi_send_dma(struct rspi_data *rspi, struct spi_transfer *t)
*/
disable_irq(rspi->tx_irq);
- rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) | SPCR_TXMD, RSPI_SPCR);
rspi_enable_irq(rspi, SPCR_SPTIE);
rspi->dma_callbacked = 0;
@@ -550,8 +549,6 @@ static int rspi_send_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
if (!desc_rx)
return -EIO;
- rspi_receive_init(rspi);
-
/*
* DMAC needs SPTIE, but if SPTIE is set, this IRQ routine will be
* called. So, this driver disables the IRQ while DMA transfer.
@@ -560,7 +557,6 @@ static int rspi_send_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
if (rspi->rx_irq != rspi->tx_irq)
disable_irq(rspi->rx_irq);
- rspi_write8(rspi, rspi_read8(rspi, RSPI_SPCR) & ~SPCR_TXMD, RSPI_SPCR);
rspi_enable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE);
rspi->dma_callbacked = 0;
@@ -602,9 +598,10 @@ static bool rspi_can_dma(struct spi_master *master, struct spi_device *spi,
return __rspi_can_dma(rspi, xfer);
}
-static int rspi_transfer_out_in(struct rspi_data *rspi,
- struct spi_transfer *xfer)
+static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi,
+ struct spi_transfer *xfer)
{
+ struct rspi_data *rspi = spi_master_get_devdata(master);
u8 spcr;
int ret;
@@ -617,6 +614,13 @@ static int rspi_transfer_out_in(struct rspi_data *rspi,
}
rspi_write8(rspi, spcr, RSPI_SPCR);
+ if (master->can_dma && __rspi_can_dma(rspi, xfer)) {
+ if (xfer->rx_buf)
+ return rspi_send_receive_dma(rspi, xfer);
+ else
+ return rspi_send_dma(rspi, xfer);
+ }
+
ret = rspi_pio_transfer(rspi, xfer->tx_buf, xfer->rx_buf, xfer->len);
if (ret < 0)
return ret;
@@ -627,20 +631,6 @@ static int rspi_transfer_out_in(struct rspi_data *rspi,
return 0;
}
-static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi,
- struct spi_transfer *xfer)
-{
- struct rspi_data *rspi = spi_master_get_devdata(master);
-
- if (!master->can_dma || !__rspi_can_dma(rspi, xfer))
- return rspi_transfer_out_in(rspi, xfer);
-
- if (xfer->rx_buf)
- return rspi_send_receive_dma(rspi, xfer);
- else
- return rspi_send_dma(rspi, xfer);
-}
-
static int rspi_rz_transfer_out_in(struct rspi_data *rspi,
struct spi_transfer *xfer)
{
Refactor RSPI (on SH) DMA handling to make it reusable for other RSPI implementations: - Call the DMA routines after configuring the TX Mode bit and after calling rspi_receive_init(), so these RSPI-specific operations can be removed from the DMA routines, - Absorb rspi_transfer_out_in() into rspi_transfer_one(). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/spi/spi-rspi.c | 30 ++++++++++-------------------- 1 file changed, 10 insertions(+), 20 deletions(-)