@@ -183,8 +183,6 @@
#define SPBFCR_TXTRG_MASK 0x30 /* Transmit Buffer Data Triggering Number */
#define SPBFCR_RXTRG_MASK 0x07 /* Receive Buffer Data Triggering Number */
-#define DUMMY_DATA 0x00
-
struct rspi_data {
void __iomem *addr;
u32 max_speed_hz;
@@ -252,6 +250,7 @@ struct spi_ops {
int (*transfer_one)(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *xfer);
u16 mode_bits;
+ u16 flags;
};
/*
@@ -552,42 +551,38 @@ static void qspi_receive_init(const struct rspi_data *rspi)
rspi_write8(rspi, 0, QSPI_SPBFCR);
}
-static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
+static int rspi_send_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
{
- struct scatterlist sg, sg_dummy;
- void *dummy = NULL, *rx_buf = t->rx_buf;
- struct dma_async_tx_descriptor *desc, *desc_dummy;
+ struct scatterlist sg_rx, sg_tx;
+ const void *tx_buf = t->tx_buf;
+ void *rx_buf = t->rx_buf;
+ struct dma_async_tx_descriptor *desc_tx, *desc_rx;
unsigned int len = t->len;
int ret = 0;
- /* prepare dummy transfer to generate SPI clocks */
- dummy = kzalloc(len, GFP_KERNEL);
- if (!dummy) {
- ret = -ENOMEM;
- goto end_nomap;
- }
- if (!rspi_dma_map_sg(&sg_dummy, dummy, len, rspi->chan_tx,
- DMA_TO_DEVICE)) {
- ret = -EFAULT;
- goto end_nomap;
- }
- desc_dummy = dmaengine_prep_slave_sg(rspi->chan_tx, &sg_dummy, 1,
+ /* prepare transmit transfer */
+ if (!rspi_dma_map_sg(&sg_tx, tx_buf, len, rspi->chan_tx,
+ DMA_TO_DEVICE))
+ return -EFAULT;
+
+ desc_tx = dmaengine_prep_slave_sg(rspi->chan_tx, &sg_tx, 1,
DMA_TO_DEVICE, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc_dummy) {
+ if (!desc_tx) {
ret = -EIO;
- goto end_dummy_mapped;
+ goto end_tx_mapped;
}
/* prepare receive transfer */
- if (!rspi_dma_map_sg(&sg, rx_buf, len, rspi->chan_rx,
+ if (!rspi_dma_map_sg(&sg_rx, rx_buf, len, rspi->chan_rx,
DMA_FROM_DEVICE)) {
ret = -EFAULT;
- goto end_dummy_mapped;
+ goto end_tx_mapped;
}
- desc = dmaengine_prep_slave_sg(rspi->chan_rx, &sg, 1, DMA_FROM_DEVICE,
- DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
- if (!desc) {
+ desc_rx = dmaengine_prep_slave_sg(rspi->chan_rx, &sg_rx, 1,
+ DMA_FROM_DEVICE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc_rx) {
ret = -EIO;
goto end;
}
@@ -606,13 +601,13 @@ static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
rspi_enable_irq(rspi, SPCR_SPTIE | SPCR_SPRIE);
rspi->dma_callbacked = 0;
- desc->callback = rspi_dma_complete;
- desc->callback_param = rspi;
- dmaengine_submit(desc);
+ desc_rx->callback = rspi_dma_complete;
+ desc_rx->callback_param = rspi;
+ dmaengine_submit(desc_rx);
dma_async_issue_pending(rspi->chan_rx);
- desc_dummy->callback = NULL; /* No callback */
- dmaengine_submit(desc_dummy);
+ desc_tx->callback = NULL; /* No callback */
+ dmaengine_submit(desc_tx);
dma_async_issue_pending(rspi->chan_tx);
ret = wait_event_interruptible_timeout(rspi->wait,
@@ -628,21 +623,19 @@ static int rspi_receive_dma(struct rspi_data *rspi, struct spi_transfer *t)
enable_irq(rspi->rx_irq);
end:
- rspi_dma_unmap_sg(&sg, rspi->chan_rx, DMA_FROM_DEVICE);
-end_dummy_mapped:
- rspi_dma_unmap_sg(&sg_dummy, rspi->chan_tx, DMA_TO_DEVICE);
-end_nomap:
- kfree(dummy);
-
+ rspi_dma_unmap_sg(&sg_rx, rspi->chan_rx, DMA_FROM_DEVICE);
+end_tx_mapped:
+ rspi_dma_unmap_sg(&sg_tx, rspi->chan_tx, DMA_TO_DEVICE);
return ret;
}
static int rspi_is_dma(const struct rspi_data *rspi, struct spi_transfer *t)
{
- if (t->tx_buf && rspi->chan_tx)
- return 1;
/* If the module receives data by DMAC, it also needs TX DMAC */
- if (t->rx_buf && rspi->chan_tx && rspi->chan_rx)
+ if (t->rx_buf)
+ return rspi->chan_tx && rspi->chan_rx;
+
+ if (rspi->chan_tx)
return 1;
return 0;
@@ -654,7 +647,7 @@ static int rspi_transfer_out_in(struct rspi_data *rspi,
int remain = xfer->len, ret;
const u8 *tx_buf = xfer->tx_buf;
u8 *rx_buf = xfer->rx_buf;
- u8 spcr, data;
+ u8 spcr;
spcr = rspi_read8(rspi, RSPI_SPCR);
if (rx_buf) {
@@ -666,8 +659,7 @@ static int rspi_transfer_out_in(struct rspi_data *rspi,
rspi_write8(rspi, spcr, RSPI_SPCR);
while (remain > 0) {
- data = tx_buf ? *tx_buf++ : DUMMY_DATA;
- ret = rspi_data_out(rspi, data);
+ ret = rspi_data_out(rspi, *tx_buf++);
if (ret < 0)
return ret;
if (rx_buf) {
@@ -689,20 +681,14 @@ static int rspi_transfer_one(struct spi_master *master, struct spi_device *spi,
struct spi_transfer *xfer)
{
struct rspi_data *rspi = spi_master_get_devdata(master);
- int ret;
if (!rspi_is_dma(rspi, xfer))
return rspi_transfer_out_in(rspi, xfer);
- if (xfer->tx_buf) {
- ret = rspi_send_dma(rspi, xfer);
- if (ret < 0)
- return ret;
- }
if (xfer->rx_buf)
- return rspi_receive_dma(rspi, xfer);
-
- return 0;
+ return rspi_send_receive_dma(rspi, xfer);
+ else
+ return rspi_send_dma(rspi, xfer);
}
static int rspi_rz_transfer_out_in(struct rspi_data *rspi,
@@ -711,17 +697,14 @@ static int rspi_rz_transfer_out_in(struct rspi_data *rspi,
int remain = xfer->len, ret;
const u8 *tx_buf = xfer->tx_buf;
u8 *rx_buf = xfer->rx_buf;
- u8 data;
rspi_rz_receive_init(rspi);
while (remain > 0) {
- data = tx_buf ? *tx_buf++ : DUMMY_DATA;
- ret = rspi_data_out_in(rspi, data);
+ ret = rspi_data_out_in(rspi, *tx_buf++);
if (ret < 0)
return ret;
- if (rx_buf)
- *rx_buf++ = ret;
+ *rx_buf++ = ret;
remain--;
}
@@ -746,17 +729,14 @@ static int qspi_transfer_out_in(struct rspi_data *rspi,
int remain = xfer->len, ret;
const u8 *tx_buf = xfer->tx_buf;
u8 *rx_buf = xfer->rx_buf;
- u8 data;
qspi_receive_init(rspi);
while (remain > 0) {
- data = tx_buf ? *tx_buf++ : DUMMY_DATA;
- ret = rspi_data_out_in(rspi, data);
+ ret = rspi_data_out_in(rspi, *tx_buf++);
if (ret < 0)
return ret;
- if (rx_buf)
- *rx_buf++ = ret;
+ *rx_buf++ = ret;
remain--;
}
@@ -807,10 +787,10 @@ static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,
if (spi->mode & SPI_LOOP) {
return qspi_transfer_out_in(rspi, xfer);
- } else if (xfer->tx_buf && xfer->tx_nbits > SPI_NBITS_SINGLE) {
+ } else if (xfer->tx_nbits > SPI_NBITS_SINGLE) {
/* Quad or Dual SPI Write */
return qspi_transfer_out(rspi, xfer);
- } else if (xfer->rx_buf && xfer->rx_nbits > SPI_NBITS_SINGLE) {
+ } else if (xfer->rx_nbits > SPI_NBITS_SINGLE) {
/* Quad or Dual SPI Read */
return qspi_transfer_in(rspi, xfer);
} else {
@@ -1061,23 +1041,26 @@ static int rspi_remove(struct platform_device *pdev)
}
static const struct spi_ops rspi_ops = {
- .set_config_register = rspi_set_config_register,
- .transfer_one = rspi_transfer_one,
- .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+ .set_config_register = rspi_set_config_register,
+ .transfer_one = rspi_transfer_one,
+ .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+ .flags = SPI_MASTER_MUST_TX,
};
static const struct spi_ops rspi_rz_ops = {
- .set_config_register = rspi_rz_set_config_register,
- .transfer_one = rspi_rz_transfer_one,
- .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+ .set_config_register = rspi_rz_set_config_register,
+ .transfer_one = rspi_rz_transfer_one,
+ .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP,
+ .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX,
};
static const struct spi_ops qspi_ops = {
- .set_config_register = qspi_set_config_register,
- .transfer_one = qspi_transfer_one,
- .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP |
- SPI_TX_DUAL | SPI_TX_QUAD |
- SPI_RX_DUAL | SPI_RX_QUAD,
+ .set_config_register = qspi_set_config_register,
+ .transfer_one = qspi_transfer_one,
+ .mode_bits = SPI_CPHA | SPI_CPOL | SPI_LOOP |
+ SPI_TX_DUAL | SPI_TX_QUAD |
+ SPI_RX_DUAL | SPI_RX_QUAD,
+ .flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX,
};
#ifdef CONFIG_OF
@@ -1197,6 +1180,7 @@ static int rspi_probe(struct platform_device *pdev)
master->prepare_message = rspi_prepare_message;
master->unprepare_message = rspi_unprepare_message;
master->mode_bits = ops->mode_bits;
+ master->flags = ops->flags;
master->dev.of_node = pdev->dev.of_node;
ret = platform_get_irq_byname(pdev, "rx");
RSPI needs dummy transfers to generate the SPI clock on receive. RSPI-RZ and QSPI always do both transmit and receive. Use the SPI core SPI_MASTER_MUST_RX/SPI_MASTER_MUST_TX infrastructure instead of checking for the presence of buffers and providing dummy data ourselves (for PIO), or providing a dummy buffer (for DMA). rspi_receive_dma() now provides full duplex DMA transfers on RSPI, and is renamed to rspi_send_receive_dma(). As the SPI core will always provide a TX buffer, the logic to choose between DMA send and DMA send/receive in rspi_transfer_one() now has to check for the presence of an RX buffer. Likewise for the DMA availability tests in rspi_is_dma(). The buffer tests in qspi_transfer_one() are now always true, so they're removed. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- drivers/spi/spi-rspi.c | 132 ++++++++++++++++++++++--------------------------- 1 file changed, 58 insertions(+), 74 deletions(-)