diff mbox

[1/2] spi: davinci: fix to support more than 2 chip selects

Message ID 1406827995-30913-2-git-send-email-grygorii.strashko@ti.com (mailing list archive)
State Accepted
Commit 7480e755c6e6e890200e8998597e8d0baa51fa8e
Headers show

Commit Message

Grygorii Strashko July 31, 2014, 5:33 p.m. UTC 
From: Murali Karicheri <m-karicheri2@ti.com>

Currently, the driver defines SPI_MAX_CHIPSELECT as 2 and
use per device array bytes_per_word based on this. This breaks
if num_chipselect per device is greater than 2. This patch
fix this and allocate memory for this array based on
num_chipselect.

It's preparation patch to enable GPIO CS feature for
Davinci SPI.

Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
---
 drivers/spi/spi-davinci.c |   12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

Comments

Mark Brown July 31, 2014, 7:35 p.m. UTC | #1 
On Thu, Jul 31, 2014 at 08:33:14PM +0300, Grygorii Strashko wrote:
> From: Murali Karicheri <m-karicheri2@ti.com>
> 
> Currently, the driver defines SPI_MAX_CHIPSELECT as 2 and
> use per device array bytes_per_word based on this. This breaks
> if num_chipselect per device is greater than 2. This patch
> fix this and allocate memory for this array based on
> num_chipselect.

Applied, thanks.
diff mbox

Patch

diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
index 50f7509..2477af4 100644
--- a/drivers/spi/spi-davinci.c
+++ b/drivers/spi/spi-davinci.c
@@ -38,8 +38,6 @@ 
 
 #define SPI_NO_RESOURCE		((resource_size_t)-1)
 
-#define SPI_MAX_CHIPSELECT	2
-
 #define CS_DEFAULT	0xFF
 
 #define SPIFMT_PHASE_MASK	BIT(16)
@@ -142,7 +140,7 @@  struct davinci_spi {
 	void			(*get_rx)(u32 rx_data, struct davinci_spi *);
 	u32			(*get_tx)(struct davinci_spi *);
 
-	u8			bytes_per_word[SPI_MAX_CHIPSELECT];
+	u8			*bytes_per_word;
 };
 
 static struct davinci_spi_config davinci_spi_default_cfg;
@@ -876,6 +874,14 @@  static int davinci_spi_probe(struct platform_device *pdev)
 	/* pdata in dspi is now updated and point pdata to that */
 	pdata = &dspi->pdata;
 
+	dspi->bytes_per_word = devm_kzalloc(&pdev->dev,
+					    sizeof(*dspi->bytes_per_word) *
+					    pdata->num_chipselect, GFP_KERNEL);
+	if (dspi->bytes_per_word == NULL) {
+		ret = -ENOMEM;
+		goto free_master;
+	}
+
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (r == NULL) {
 		ret = -ENOENT;