| Message ID | 1432433625-23407-5-git-send-email-mwelling@ieee.org (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | c4339ac775b0558373bb6882b8355cf6e85d5709 |
| Headers | show |
On Sat, 23 May 2015, Michael Welling wrote: > If a valid GPIO is specified but cannot be requested by the driver, print a > message and error out of omap2_mcspi_setup. > > Signed-off-by: Michael Welling <mwelling@ieee.org> > --- > drivers/spi/spi-omap2-mcspi.c | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) > > diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c > index c4e21ad..5867384 100644 > --- a/drivers/spi/spi-omap2-mcspi.c > +++ b/drivers/spi/spi-omap2-mcspi.c > @@ -1023,9 +1023,12 @@ static int omap2_mcspi_setup(struct spi_device *spi) > } > > if (gpio_is_valid(spi->cs_gpio)) { > - if (gpio_request(spi->cs_gpio, dev_name(&spi->dev)) == 0) > - gpio_direction_output(spi->cs_gpio, > - !(spi->mode & SPI_CS_HIGH)); > + ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev)); > + if (ret) { > + dev_err(&spi->dev, "failed to request gpio\n"); > + return ret; > + } > + gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); > } just wondering if the outer gpio_is_valid is actually needed as it seems gpio_request() is actually calling gpio_is_valid() anyway and would return non 0 if it were not, thx! hofrat -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Sun, May 24, 2015 at 10:13:07AM +0200, Nicholas Mc Guire wrote: > On Sat, 23 May 2015, Michael Welling wrote: > > > If a valid GPIO is specified but cannot be requested by the driver, print a > > message and error out of omap2_mcspi_setup. > > > > Signed-off-by: Michael Welling <mwelling@ieee.org> > > --- > > drivers/spi/spi-omap2-mcspi.c | 9 ++++++--- > > 1 file changed, 6 insertions(+), 3 deletions(-) > > > > diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c > > index c4e21ad..5867384 100644 > > --- a/drivers/spi/spi-omap2-mcspi.c > > +++ b/drivers/spi/spi-omap2-mcspi.c > > @@ -1023,9 +1023,12 @@ static int omap2_mcspi_setup(struct spi_device *spi) > > } > > > > if (gpio_is_valid(spi->cs_gpio)) { > > - if (gpio_request(spi->cs_gpio, dev_name(&spi->dev)) == 0) > > - gpio_direction_output(spi->cs_gpio, > > - !(spi->mode & SPI_CS_HIGH)); > > + ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev)); > > + if (ret) { > > + dev_err(&spi->dev, "failed to request gpio\n"); > > + return ret; > > + } > > + gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); > > } > > just wondering if the outer gpio_is_valid is actually needed as it seems > gpio_request() is actually calling gpio_is_valid() anyway and would return > non 0 if it were not, In this case we have to check first because if the GPIO is not registered the native chip select is assumed. If the GPIO is registered, is valid and can be requested we use it as the chip select. If the GPIO is registered and valid but cannot be requested we return an error. > > thx! > hofrat -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index c4e21ad..5867384 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1023,9 +1023,12 @@ static int omap2_mcspi_setup(struct spi_device *spi) } if (gpio_is_valid(spi->cs_gpio)) { - if (gpio_request(spi->cs_gpio, dev_name(&spi->dev)) == 0) - gpio_direction_output(spi->cs_gpio, - !(spi->mode & SPI_CS_HIGH)); + ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev)); + if (ret) { + dev_err(&spi->dev, "failed to request gpio\n"); + return ret; + } + gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); } ret = pm_runtime_get_sync(mcspi->dev);
If a valid GPIO is specified but cannot be requested by the driver, print a message and error out of omap2_mcspi_setup. Signed-off-by: Michael Welling <mwelling@ieee.org> --- drivers/spi/spi-omap2-mcspi.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)