Message ID | 1440362322-32523-1-git-send-email-jogo@openwrt.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On Sun, Aug 23, 2015 at 10:38 PM, Jonas Gorski <jogo@openwrt.org> wrote: > Add support for dual read/writes on spi-bcm63xx-hsspi. This has been > tested with a s25fl129p1 dual read capable spi flash, with a nice speed > improvement: > > serial read: > > root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192 > 2032+0 records in > 2032+0 records out > real 0m 4.39s > user 0m 0.00s > sys 0m 1.55s > > dual read: > > root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192 > 2032+0 records in > 2032+0 records out > real 0m 3.09s > user 0m 0.00s > sys 0m 1.56s > > Signed-off-by: Jonas Gorski <jogo@openwrt.org> > --- > drivers/spi/spi-bcm63xx-hsspi.c | 13 +++++++++---- > 1 file changed, 9 insertions(+), 4 deletions(-) > > diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c > index f5ca6dc..ebd047f 100644 > --- a/drivers/spi/spi-bcm63xx-hsspi.c > +++ b/drivers/spi/spi-bcm63xx-hsspi.c > @@ -76,6 +76,7 @@ > #define HSSPI_FIFO_REG(x) (0x200 + (x) * 0x200) > > > +#define HSSPI_OP_MULTIBIT BIT(11) > #define HSSPI_OP_CODE_SHIFT 13 > #define HSSPI_OP_SLEEP (0 << HSSPI_OP_CODE_SHIFT) > #define HSSPI_OP_READ_WRITE (1 << HSSPI_OP_CODE_SHIFT) > @@ -168,12 +169,15 @@ static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t) > else if (rx) > opcode = HSSPI_OP_READ; > > + if ((opcode == HSSPI_OP_READ && t->rx_nbits == SPI_NBITS_DUAL) || > + (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL)) > + opcode |= HSSPI_OP_MULTIBIT; > + > if (opcode != HSSPI_OP_READ) > step_size -= HSSPI_OPCODE_LEN; Well that won't work anymore when using multibit m(. Let me try again ... > > - __raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT | > - 2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT | > - 2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff, > + __raw_writel(1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT | > + 1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT | 0xff, > bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select)); > > while (pending > 0) { > @@ -374,7 +378,8 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev) > master->num_chipselect = 8; > master->setup = bcm63xx_hsspi_setup; > master->transfer_one_message = bcm63xx_hsspi_transfer_one; > - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; > + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | > + SPI_RX_DUAL | SPI_TX_DUAL; > master->bits_per_word_mask = SPI_BPW_MASK(8); > master->auto_runtime_pm = true; > > -- > 2.1.4 > -- > To unsubscribe from this list: send the line "unsubscribe linux-spi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/spi/spi-bcm63xx-hsspi.c b/drivers/spi/spi-bcm63xx-hsspi.c index f5ca6dc..ebd047f 100644 --- a/drivers/spi/spi-bcm63xx-hsspi.c +++ b/drivers/spi/spi-bcm63xx-hsspi.c @@ -76,6 +76,7 @@ #define HSSPI_FIFO_REG(x) (0x200 + (x) * 0x200) +#define HSSPI_OP_MULTIBIT BIT(11) #define HSSPI_OP_CODE_SHIFT 13 #define HSSPI_OP_SLEEP (0 << HSSPI_OP_CODE_SHIFT) #define HSSPI_OP_READ_WRITE (1 << HSSPI_OP_CODE_SHIFT) @@ -168,12 +169,15 @@ static int bcm63xx_hsspi_do_txrx(struct spi_device *spi, struct spi_transfer *t) else if (rx) opcode = HSSPI_OP_READ; + if ((opcode == HSSPI_OP_READ && t->rx_nbits == SPI_NBITS_DUAL) || + (opcode == HSSPI_OP_WRITE && t->tx_nbits == SPI_NBITS_DUAL)) + opcode |= HSSPI_OP_MULTIBIT; + if (opcode != HSSPI_OP_READ) step_size -= HSSPI_OPCODE_LEN; - __raw_writel(0 << MODE_CTRL_PREPENDBYTE_CNT_SHIFT | - 2 << MODE_CTRL_MULTIDATA_WR_STRT_SHIFT | - 2 << MODE_CTRL_MULTIDATA_RD_STRT_SHIFT | 0xff, + __raw_writel(1 << MODE_CTRL_MULTIDATA_WR_SIZE_SHIFT | + 1 << MODE_CTRL_MULTIDATA_RD_SIZE_SHIFT | 0xff, bs->regs + HSSPI_PROFILE_MODE_CTRL_REG(chip_select)); while (pending > 0) { @@ -374,7 +378,8 @@ static int bcm63xx_hsspi_probe(struct platform_device *pdev) master->num_chipselect = 8; master->setup = bcm63xx_hsspi_setup; master->transfer_one_message = bcm63xx_hsspi_transfer_one; - master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH; + master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | + SPI_RX_DUAL | SPI_TX_DUAL; master->bits_per_word_mask = SPI_BPW_MASK(8); master->auto_runtime_pm = true;
Add support for dual read/writes on spi-bcm63xx-hsspi. This has been tested with a s25fl129p1 dual read capable spi flash, with a nice speed improvement: serial read: root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192 2032+0 records in 2032+0 records out real 0m 4.39s user 0m 0.00s sys 0m 1.55s dual read: root@OpenWrt:/# time dd if=/dev/mtd4 of=/dev/null bs=8192 2032+0 records in 2032+0 records out real 0m 3.09s user 0m 0.00s sys 0m 1.56s Signed-off-by: Jonas Gorski <jogo@openwrt.org> --- drivers/spi/spi-bcm63xx-hsspi.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)