| Message ID | 1447986080-31410-4-git-send-email-leilk.liu@mediatek.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | e38da37fa8f410e61f2a6c03b3d14fec11b00259 |
| Headers | show |
On Fri, Nov 20, 2015 at 10:21:19AM +0800, Leilk Liu wrote: > This patch revises failure flow while pm_runtime_enable(). Why? This also doesn't apply against current code, please check and resend. > > Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> > --- > drivers/spi/spi-mt65xx.c | 15 ++++++++------- > 1 file changed, 8 insertions(+), 7 deletions(-) > > diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c > index 6c1a96e..00a36da 100644 > --- a/drivers/spi/spi-mt65xx.c > +++ b/drivers/spi/spi-mt65xx.c > @@ -607,7 +607,8 @@ static int mtk_spi_probe(struct platform_device *pdev) > ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk); > if (ret < 0) { > dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret); > - goto err_disable_clk; > + clk_disable_unprepare(mdata->spi_clk); > + goto err_put_master; > } > > clk_disable_unprepare(mdata->spi_clk); > @@ -617,7 +618,7 @@ static int mtk_spi_probe(struct platform_device *pdev) > ret = devm_spi_register_master(&pdev->dev, master); > if (ret) { > dev_err(&pdev->dev, "failed to register master (%d)\n", ret); > - goto err_put_master; > + goto err_disable_runtime_pm; > } > > if (mdata->dev_comp->need_pad_sel) { > @@ -626,14 +627,14 @@ static int mtk_spi_probe(struct platform_device *pdev) > "pad_num does not match num_chipselect(%d != %d)\n", > mdata->pad_num, master->num_chipselect); > ret = -EINVAL; > - goto err_put_master; > + goto err_disable_runtime_pm; > } > > if (!master->cs_gpios && master->num_chipselect > 1) { > dev_err(&pdev->dev, > "cs_gpios not specified and num_chipselect > 1\n"); > ret = -EINVAL; > - goto err_put_master; > + goto err_disable_runtime_pm; > } > > if (master->cs_gpios) { > @@ -644,7 +645,7 @@ static int mtk_spi_probe(struct platform_device *pdev) > if (ret) { > dev_err(&pdev->dev, > "can't get CS GPIO %i\n", i); > - goto err_put_master; > + goto err_disable_runtime_pm; > } > } > } > @@ -652,8 +653,8 @@ static int mtk_spi_probe(struct platform_device *pdev) > > return 0; > > -err_disable_clk: > - clk_disable_unprepare(mdata->spi_clk); > +err_disable_runtime_pm: > + pm_runtime_disable(&pdev->dev); > err_put_master: > spi_master_put(master); > > -- > 1.7.9.5 > >
On Sat, 2015-11-21 at 13:39 +0000, Mark Brown wrote: > On Fri, Nov 20, 2015 at 10:21:19AM +0800, Leilk Liu wrote: > > This patch revises failure flow while pm_runtime_enable(). > > Why? This also doesn't apply against current code, please check and > resend. I don't know. I can git am this patch to spi/for-next. I will resend it, please help to apply it again, thanks. > > > > Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> > > --- > > drivers/spi/spi-mt65xx.c | 15 ++++++++------- > > 1 file changed, 8 insertions(+), 7 deletions(-) > > > > diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c > > index 6c1a96e..00a36da 100644 > > --- a/drivers/spi/spi-mt65xx.c > > +++ b/drivers/spi/spi-mt65xx.c > > @@ -607,7 +607,8 @@ static int mtk_spi_probe(struct platform_device *pdev) > > ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk); > > if (ret < 0) { > > dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret); > > - goto err_disable_clk; > > + clk_disable_unprepare(mdata->spi_clk); > > + goto err_put_master; > > } > > > > clk_disable_unprepare(mdata->spi_clk); > > @@ -617,7 +618,7 @@ static int mtk_spi_probe(struct platform_device *pdev) > > ret = devm_spi_register_master(&pdev->dev, master); > > if (ret) { > > dev_err(&pdev->dev, "failed to register master (%d)\n", ret); > > - goto err_put_master; > > + goto err_disable_runtime_pm; > > } > > > > if (mdata->dev_comp->need_pad_sel) { > > @@ -626,14 +627,14 @@ static int mtk_spi_probe(struct platform_device *pdev) > > "pad_num does not match num_chipselect(%d != %d)\n", > > mdata->pad_num, master->num_chipselect); > > ret = -EINVAL; > > - goto err_put_master; > > + goto err_disable_runtime_pm; > > } > > > > if (!master->cs_gpios && master->num_chipselect > 1) { > > dev_err(&pdev->dev, > > "cs_gpios not specified and num_chipselect > 1\n"); > > ret = -EINVAL; > > - goto err_put_master; > > + goto err_disable_runtime_pm; > > } > > > > if (master->cs_gpios) { > > @@ -644,7 +645,7 @@ static int mtk_spi_probe(struct platform_device *pdev) > > if (ret) { > > dev_err(&pdev->dev, > > "can't get CS GPIO %i\n", i); > > - goto err_put_master; > > + goto err_disable_runtime_pm; > > } > > } > > } > > @@ -652,8 +653,8 @@ static int mtk_spi_probe(struct platform_device *pdev) > > > > return 0; > > > > -err_disable_clk: > > - clk_disable_unprepare(mdata->spi_clk); > > +err_disable_runtime_pm: > > + pm_runtime_disable(&pdev->dev); > > err_put_master: > > spi_master_put(master); > > > > -- > > 1.7.9.5 > > > > -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Nov 24, 2015 at 10:33:24AM +0800, lei liu wrote: > On Sat, 2015-11-21 at 13:39 +0000, Mark Brown wrote: > > On Fri, Nov 20, 2015 at 10:21:19AM +0800, Leilk Liu wrote: > > > This patch revises failure flow while pm_runtime_enable(). > > Why? This also doesn't apply against current code, please check and > > resend. > I don't know. I can git am this patch to spi/for-next. I will resend it, > please help to apply it again, thanks. If you don't know why we should make this change then we may as well just not make it?
On Tue, 2015-11-24 at 13:04 +0000, Mark Brown wrote: > On Tue, Nov 24, 2015 at 10:33:24AM +0800, lei liu wrote: > > On Sat, 2015-11-21 at 13:39 +0000, Mark Brown wrote: > > > On Fri, Nov 20, 2015 at 10:21:19AM +0800, Leilk Liu wrote: > > > > > This patch revises failure flow while pm_runtime_enable(). > > > > Why? This also doesn't apply against current code, please check and > > > resend. > > > I don't know. I can git am this patch to spi/for-next. I will resend it, > > please help to apply it again, thanks. > > If you don't know why we should make this change then we may as well > just not make it? OK. I will write a proper commit message to explain what this patch does. Thanks. > _________________ > ______________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek -- To unsubscribe from this list: send the line "unsubscribe linux-spi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c index 6c1a96e..00a36da 100644 --- a/drivers/spi/spi-mt65xx.c +++ b/drivers/spi/spi-mt65xx.c @@ -607,7 +607,8 @@ static int mtk_spi_probe(struct platform_device *pdev) ret = clk_set_parent(mdata->sel_clk, mdata->parent_clk); if (ret < 0) { dev_err(&pdev->dev, "failed to clk_set_parent (%d)\n", ret); - goto err_disable_clk; + clk_disable_unprepare(mdata->spi_clk); + goto err_put_master; } clk_disable_unprepare(mdata->spi_clk); @@ -617,7 +618,7 @@ static int mtk_spi_probe(struct platform_device *pdev) ret = devm_spi_register_master(&pdev->dev, master); if (ret) { dev_err(&pdev->dev, "failed to register master (%d)\n", ret); - goto err_put_master; + goto err_disable_runtime_pm; } if (mdata->dev_comp->need_pad_sel) { @@ -626,14 +627,14 @@ static int mtk_spi_probe(struct platform_device *pdev) "pad_num does not match num_chipselect(%d != %d)\n", mdata->pad_num, master->num_chipselect); ret = -EINVAL; - goto err_put_master; + goto err_disable_runtime_pm; } if (!master->cs_gpios && master->num_chipselect > 1) { dev_err(&pdev->dev, "cs_gpios not specified and num_chipselect > 1\n"); ret = -EINVAL; - goto err_put_master; + goto err_disable_runtime_pm; } if (master->cs_gpios) { @@ -644,7 +645,7 @@ static int mtk_spi_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "can't get CS GPIO %i\n", i); - goto err_put_master; + goto err_disable_runtime_pm; } } } @@ -652,8 +653,8 @@ static int mtk_spi_probe(struct platform_device *pdev) return 0; -err_disable_clk: - clk_disable_unprepare(mdata->spi_clk); +err_disable_runtime_pm: + pm_runtime_disable(&pdev->dev); err_put_master: spi_master_put(master);
This patch revises failure flow while pm_runtime_enable(). Signed-off-by: Leilk Liu <leilk.liu@mediatek.com> --- drivers/spi/spi-mt65xx.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)