From patchwork Wed Apr 13 13:12:05 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Purna Chandra Mandal X-Patchwork-Id: 8822361 Return-Path: X-Original-To: patchwork-linux-spi@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork1.web.kernel.org (Postfix) with ESMTP id BC9A99F3D1 for ; Wed, 13 Apr 2016 13:14:31 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id AA6392025A for ; Wed, 13 Apr 2016 13:14:25 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 9EA4F201B9 for ; Wed, 13 Apr 2016 13:14:23 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760405AbcDMNOB (ORCPT ); Wed, 13 Apr 2016 09:14:01 -0400 Received: from exsmtp01.microchip.com ([198.175.253.37]:34575 "EHLO email.microchip.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1760374AbcDMNN6 (ORCPT ); Wed, 13 Apr 2016 09:13:58 -0400 Received: from mx.microchip.com (10.10.76.4) by CHN-SV-EXCH01.mchp-main.com (10.10.76.37) with Microsoft SMTP Server id 14.3.181.6; Wed, 13 Apr 2016 06:13:55 -0700 Received: by mx.microchip.com (sSMTP sendmail emulation); Wed, 13 Apr 2016 18:42:12 +0530 From: Purna Chandra Mandal To: , CC: Mark Brown , Purna Chandra Mandal Subject: [PATCH 2/2] spi: pic32-sqi: add SPI driver for PIC32 SQI controller. Date: Wed, 13 Apr 2016 18:42:05 +0530 Message-ID: <1460553125-32649-2-git-send-email-purna.mandal@microchip.com> X-Mailer: git-send-email 1.8.3.1 In-Reply-To: <1460553125-32649-1-git-send-email-purna.mandal@microchip.com> References: <1460553125-32649-1-git-send-email-purna.mandal@microchip.com> MIME-Version: 1.0 Sender: linux-spi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org X-Spam-Status: No, score=-7.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP This driver implements SPI master interface for Quad SPI controller, specifically for accessing quad SPI flash. It uses descriptor-based DMA to perform half-duplex communication on SPI bus for single, dual and quad-lane SPI transactions. Signed-off-by: Purna Chandra Mandal Cc: Mark Brown --- drivers/spi/Kconfig | 6 + drivers/spi/Makefile | 1 + drivers/spi/spi-pic32-sqi.c | 815 ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 822 insertions(+) create mode 100644 drivers/spi/spi-pic32-sqi.c diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 8a8ff50..281ed5d 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -442,6 +442,12 @@ config SPI_PIC32 help SPI driver for Microchip PIC32 SPI master controller. +config SPI_PIC32_SQI + tristate "Microchip PIC32 Quad SPI driver" + depends on MACH_PIC32 || COMPILE_TEST + help + SPI driver for PIC32 Quad SPI controller. + config SPI_PL022 tristate "ARM AMBA PL022 SSP controller" depends on ARM_AMBA diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 06019ed..3c74d00 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_SPI_OMAP24XX) += spi-omap2-mcspi.o obj-$(CONFIG_SPI_TI_QSPI) += spi-ti-qspi.o obj-$(CONFIG_SPI_ORION) += spi-orion.o obj-$(CONFIG_SPI_PIC32) += spi-pic32.o +obj-$(CONFIG_SPI_PIC32_SQI) += spi-pic32-sqi.o obj-$(CONFIG_SPI_PL022) += spi-pl022.o obj-$(CONFIG_SPI_PPC4xx) += spi-ppc4xx.o spi-pxa2xx-platform-objs := spi-pxa2xx.o spi-pxa2xx-dma.o diff --git a/drivers/spi/spi-pic32-sqi.c b/drivers/spi/spi-pic32-sqi.c new file mode 100644 index 0000000..bb31dc8 --- /dev/null +++ b/drivers/spi/spi-pic32-sqi.c @@ -0,0 +1,815 @@ +/* + * PIC32 Quad SPI controller driver. + * + * Purna Chandra Mandal + * Copyright (c) 2016, Microchip Technology Inc. + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* SQI registers */ +#define PESQI_XIP_CONF1_REG 0x00 +#define PESQI_XIP_CONF2_REG 0x04 +#define PESQI_CONF_REG 0x08 +#define PESQI_CTRL_REG 0x0C +#define PESQI_CLK_CTRL_REG 0x10 +#define PESQI_CMD_THRES_REG 0x14 +#define PESQI_INT_THRES_REG 0x18 +#define PESQI_INT_ENABLE_REG 0x1C +#define PESQI_INT_STAT_REG 0x20 +#define PESQI_TX_DATA_REG 0x24 +#define PESQI_RX_DATA_REG 0x28 +#define PESQI_STAT1_REG 0x2C +#define PESQI_STAT2_REG 0x30 +#define PESQI_BD_CTRL_REG 0x34 +#define PESQI_BD_CUR_ADDR_REG 0x38 +#define PESQI_BD_BASE_ADDR_REG 0x40 +#define PESQI_BD_STAT_REG 0x44 +#define PESQI_BD_POLL_CTRL_REG 0x48 +#define PESQI_BD_TX_DMA_STAT_REG 0x4C +#define PESQI_BD_RX_DMA_STAT_REG 0x50 +#define PESQI_THRES_REG 0x54 +#define PESQI_INT_SIGEN_REG 0x58 + +/* PESQI_CONF_REG fields */ +#define PESQI_MODE 0x7 +#define PESQI_MODE_BOOT 0 +#define PESQI_MODE_PIO 1 +#define PESQI_MODE_DMA 2 +#define PESQI_MODE_XIP 3 +#define PESQI_MODE_SHIFT 0 +#define PESQI_CPHA BIT(3) +#define PESQI_CPOL BIT(4) +#define PESQI_LSBF BIT(5) +#define PESQI_RXLATCH BIT(7) +#define PESQI_SERMODE BIT(8) +#define PESQI_WP_EN BIT(9) +#define PESQI_HOLD_EN BIT(10) +#define PESQI_BURST_EN BIT(12) +#define PESQI_CS_CTRL_HW BIT(15) +#define PESQI_SOFT_RESET BIT(16) +#define PESQI_LANES_SHIFT 20 +#define PESQI_SINGLE_LANE 0 +#define PESQI_DUAL_LANE 1 +#define PESQI_QUAD_LANE 2 +#define PESQI_CSEN_SHIFT 24 +#define PESQI_EN BIT(23) + +/* PESQI_CLK_CTRL_REG fields */ +#define PESQI_CLK_EN BIT(0) +#define PESQI_CLK_STABLE BIT(1) +#define PESQI_CLKDIV_SHIFT 8 +#define PESQI_CLKDIV 0xff + +/* PESQI_INT_THR/CMD_THR_REG */ +#define PESQI_TXTHR_MASK 0x1f +#define PESQI_TXTHR_SHIFT 8 +#define PESQI_RXTHR_MASK 0x1f +#define PESQI_RXTHR_SHIFT 0 + +/* PESQI_INT_EN/INT_STAT/INT_SIG_EN_REG */ +#define PESQI_TXEMPTY BIT(0) +#define PESQI_TXFULL BIT(1) +#define PESQI_TXTHR BIT(2) +#define PESQI_RXEMPTY BIT(3) +#define PESQI_RXFULL BIT(4) +#define PESQI_RXTHR BIT(5) +#define PESQI_BDDONE BIT(9) /* BD processing complete */ +#define PESQI_PKTCOMP BIT(10) /* packet processing complete */ +#define PESQI_DMAERR BIT(11) /* error */ + +/* PESQI_BD_CTRL_REG */ +#define PESQI_DMA_EN BIT(0) /* enable DMA engine */ +#define PESQI_POLL_EN BIT(1) /* enable polling */ +#define PESQI_BDP_START BIT(2) /* start BD processor */ + +/* PESQI controller buffer descriptor */ +struct buf_desc { + u32 bd_ctrl; /* control */ + u32 bd_status; /* reserved */ + u32 bd_addr; /* DMA buffer addr */ + u32 bd_nextp; /* next item in chain */ +}; + +/* bd_ctrl */ +#define BD_BUFLEN 0x1ff +#define BD_CBD_INT_EN BIT(16) /* Current BD is processed */ +#define BD_PKT_INT_EN BIT(17) /* All BDs of PKT processed */ +#define BD_LIFM BIT(18) /* last data of pkt */ +#define BD_LAST BIT(19) /* end of list */ +#define BD_DATA_RECV BIT(20) /* receive data */ +#define BD_DDR BIT(21) /* DDR mode */ +#define BD_DUAL BIT(22) /* Dual SPI */ +#define BD_QUAD BIT(23) /* Quad SPI */ +#define BD_LSBF BIT(25) /* LSB First */ +#define BD_STAT_CHECK BIT(27) /* Status poll */ +#define BD_DEVSEL_SHIFT 28 /* CS */ +#define BD_CS_DEASSERT BIT(30) /* de-assert CS after current BD */ +#define BD_EN BIT(31) /* BD owned by H/W */ + +/** + * struct ring_desc - Representation of SQI ring descriptor + * @list: list element to add to free or used list. + * @bd: PESQI controller buffer descriptor + * @bd_dma: DMA address of PESQI controller buffer descriptor + * @xfer_len: transfer length + */ +struct ring_desc { + struct list_head list; + struct buf_desc *bd; + dma_addr_t bd_dma; + u32 xfer_len; +}; + +/* Global constants */ +#define PESQI_BD_BUF_LEN_MAX SZ_256 +#define PESQI_BD_COUNT SZ_256 /* max 64KB data per spi message */ + +struct pic32_sqi { + void __iomem *regs; + struct clk *sys_clk; + struct clk *base_clk; /* drives spi clock */ + struct spi_master *master; + int irq; + struct completion xfer_done; + struct ring_desc *ring; + void *bd; + dma_addr_t bd_dma; + struct list_head bd_list_free; /* free */ + struct list_head bd_list_used; /* allocated */ + struct spi_device *cur_spi; + u32 cur_speed; + u8 cur_mode; +}; + +static inline void pic32_setbits(void __iomem *reg, u32 set) +{ + writel(readl(reg) | set, reg); +} + +static inline void pic32_clrbits(void __iomem *reg, u32 clr) +{ + writel(readl(reg) & ~clr, reg); +} + +static int pic32_sqi_set_clk_rate(struct pic32_sqi *sqi, u32 sck) +{ + u32 val, div; + + /* div = base_clk / (2 * spi_clk) */ + div = clk_get_rate(sqi->base_clk) / (2 * sck); + div &= PESQI_CLKDIV; + + val = readl(sqi->regs + PESQI_CLK_CTRL_REG); + /* apply new divider */ + val &= ~(PESQI_CLK_STABLE | (PESQI_CLKDIV << PESQI_CLKDIV_SHIFT)); + val |= div << PESQI_CLKDIV_SHIFT; + writel(val, sqi->regs + PESQI_CLK_CTRL_REG); + + /* wait for stability */ + return readl_poll_timeout(sqi->regs + PESQI_CLK_CTRL_REG, val, + val & PESQI_CLK_STABLE, 1, 5000); +} + +static inline void pic32_sqi_enable_int(struct pic32_sqi *sqi) +{ + u32 mask = PESQI_DMAERR | PESQI_BDDONE | PESQI_PKTCOMP; + + writel(mask, sqi->regs + PESQI_INT_ENABLE_REG); + /* INT_SIGEN works as interrupt-gate to INTR line */ + writel(mask, sqi->regs + PESQI_INT_SIGEN_REG); +} + +static inline void pic32_sqi_disable_int(struct pic32_sqi *sqi) +{ + writel(0, sqi->regs + PESQI_INT_ENABLE_REG); + writel(0, sqi->regs + PESQI_INT_SIGEN_REG); +} + +static irqreturn_t pic32_sqi_isr(int irq, void *dev_id) +{ + struct pic32_sqi *sqi = dev_id; + u32 enable, status; + + enable = readl(sqi->regs + PESQI_INT_ENABLE_REG); + status = readl(sqi->regs + PESQI_INT_STAT_REG); + if (!status) + return IRQ_NONE; + + if (status & PESQI_DMAERR) { + enable = 0; + goto irq_done; + } + + if (status & PESQI_TXTHR) + enable &= ~(PESQI_TXTHR | PESQI_TXFULL | PESQI_TXEMPTY); + + if (status & PESQI_RXTHR) + enable &= ~(PESQI_RXTHR | PESQI_RXFULL | PESQI_RXEMPTY); + + if (status & PESQI_BDDONE) + enable &= ~PESQI_BDDONE; + + /* packet processing completed */ + if (status & PESQI_PKTCOMP) { + /* mask all interrupts */ + enable = 0; + /* complete trasaction */ + complete(&sqi->xfer_done); + } + +irq_done: + /* interrupts are sticky, so mask when handled */ + writel(enable, sqi->regs + PESQI_INT_ENABLE_REG); + + return IRQ_HANDLED; +} + +static struct ring_desc *ring_desc_get(struct pic32_sqi *sqi) +{ + struct ring_desc *rdesc; + + if (list_empty(&sqi->bd_list_free)) + return NULL; + + rdesc = list_first_entry(&sqi->bd_list_free, struct ring_desc, list); + list_del(&rdesc->list); + list_add_tail(&rdesc->list, &sqi->bd_list_used); + return rdesc; +} + +static void ring_desc_put(struct pic32_sqi *sqi, struct ring_desc *rdesc) +{ + list_del(&rdesc->list); + list_add(&rdesc->list, &sqi->bd_list_free); +} + +static dma_addr_t pic32_sqi_map_transfer(struct pic32_sqi *sqi, + struct spi_transfer *transfer) +{ + struct device *dev = &sqi->master->dev; + const int len = transfer->len; + enum dma_data_direction dir; + dma_addr_t dma_buf; + const void *buf; + + transfer->rx_dma = 0; + transfer->tx_dma = 0; + + if (transfer->rx_buf) { + buf = transfer->rx_buf; + dir = DMA_FROM_DEVICE; + } else { + buf = transfer->tx_buf; + dir = DMA_TO_DEVICE; + } + + if (is_vmalloc_addr(buf)) + dma_buf = dma_map_page(dev, vmalloc_to_page(buf), + offset_in_page(buf), len, dir); + else + dma_buf = dma_map_single(dev, (void *)buf, len, dir); + + if (dma_mapping_error(dev, dma_buf)) + return 0; + + if (transfer->rx_buf) + transfer->rx_dma = dma_buf; + else + transfer->tx_dma = dma_buf; + + return dma_buf; +} + +static void pic32_sqi_unmap_transfer(struct pic32_sqi *sqi, + struct spi_transfer *transfer) +{ + struct device *dev = &sqi->master->dev; + const int len = transfer->len; + enum dma_data_direction dir; + dma_addr_t dma_buf; + const void *buf; + + if (transfer->rx_buf) { + buf = transfer->rx_buf; + dma_buf = transfer->rx_dma; + dir = DMA_FROM_DEVICE; + } else { + buf = transfer->tx_buf; + dma_buf = transfer->tx_dma; + dir = DMA_TO_DEVICE; + } + + if (is_vmalloc_addr(buf)) + dma_unmap_page(dev, dma_buf, len, dir); + else + dma_unmap_single(dev, dma_buf, len, dir); +} + +static int pic32_sqi_one_transfer(struct pic32_sqi *sqi, + struct spi_message *mesg, + struct spi_transfer *xfer) +{ + struct spi_device *spi = mesg->spi; + struct ring_desc *rdesc; + dma_addr_t dma_buf; + int remaining, offset; + struct buf_desc *bd; + u32 bd_ctrl; + u32 nbits; + + /* Device selection */ + bd_ctrl = spi->chip_select << BD_DEVSEL_SHIFT; + + /* half-duplex: select transfer direction and lane */ + if (xfer->rx_buf) { + bd_ctrl |= BD_DATA_RECV; + nbits = xfer->rx_nbits; + } else { + nbits = xfer->tx_nbits; + } + + if (nbits & SPI_NBITS_QUAD) + bd_ctrl |= BD_QUAD; + else if (nbits & SPI_NBITS_DUAL) + bd_ctrl |= BD_DUAL; + + /* LSB first */ + if (spi->mode & SPI_LSB_FIRST) + bd_ctrl |= BD_LSBF; + + /* ownership to hardware */ + bd_ctrl |= BD_EN; + + dma_buf = pic32_sqi_map_transfer(sqi, xfer); + if (!dma_buf) + return -EPERM; + + /* fill BDs - one BD can handle upto 256 byte of data */ + for (offset = 0, remaining = xfer->len; remaining;) { + /* get ring descriptor */ + rdesc = ring_desc_get(sqi); + if (!rdesc) + break; + + rdesc->xfer_len = min_t(u32, remaining, PESQI_BD_BUF_LEN_MAX); + + bd = rdesc->bd; + + /* BD CTRL: length */ + bd->bd_ctrl = bd_ctrl; + bd->bd_ctrl |= rdesc->xfer_len; + + /* BD STAT */ + bd->bd_status = 0; + + /* BD BUFFER ADDRESS */ + bd->bd_addr = dma_buf + offset; + + remaining -= rdesc->xfer_len; + offset += rdesc->xfer_len; + } + + return 0; +} + +static int pic32_sqi_prepare_hardware(struct spi_master *master) +{ + struct pic32_sqi *sqi = spi_master_get_devdata(master); + + /* enable spi interface */ + pic32_setbits(sqi->regs + PESQI_CONF_REG, PESQI_EN); + /* enable spi clk */ + pic32_setbits(sqi->regs + PESQI_CLK_CTRL_REG, PESQI_CLK_EN); + + return 0; +} + +static int pic32_sqi_one_message(struct spi_master *master, + struct spi_message *msg) +{ + struct spi_device *spi = msg->spi; + struct ring_desc *rdesc, *next; + struct spi_transfer *xfer; + struct pic32_sqi *sqi; + int ret = 0, mode; + u32 val; + + sqi = spi_master_get_devdata(master); + + reinit_completion(&sqi->xfer_done); + msg->actual_length = 0; + + /* We can't handle spi_transfer specific "speed_hz", "bits_per_word" + * and "delay_usecs". But spi_device specific speed and mode change + * can be handled at best during spi chip-select switch. + */ + if (sqi->cur_spi != spi) { + /* set spi speed */ + if (sqi->cur_speed != spi->max_speed_hz) { + sqi->cur_speed = spi->max_speed_hz; + ret = pic32_sqi_set_clk_rate(sqi, spi->max_speed_hz); + if (ret) + dev_warn(&spi->dev, "set_clk, %d\n", ret); + } + + /* set spi mode */ + mode = spi->mode & (SPI_MODE_3 | SPI_LSB_FIRST); + if (sqi->cur_mode != mode) { + val = readl(sqi->regs + PESQI_CONF_REG); + val &= ~(PESQI_CPOL | PESQI_CPHA | PESQI_LSBF); + if (mode & SPI_CPOL) + val |= PESQI_CPOL; + if (mode & SPI_LSB_FIRST) + val |= PESQI_LSBF; + val |= PESQI_CPHA; + writel(val, sqi->regs + PESQI_CONF_REG); + + sqi->cur_mode = mode; + } + sqi->cur_spi = spi; + } + + /* prepare hardware desc-list(BD) for transfer(s) */ + list_for_each_entry(xfer, &msg->transfers, transfer_list) { + ret = pic32_sqi_one_transfer(sqi, msg, xfer); + if (ret) { + dev_err(&spi->dev, "xfer %p err\n", xfer); + goto xfer_out; + } + } + + /* BDs are prepared and chained. Now mark LAST_BD, CS_DEASSERT at last + * element of the list. + */ + rdesc = list_last_entry(&sqi->bd_list_used, struct ring_desc, list); + rdesc->bd->bd_ctrl |= BD_LAST | BD_CS_DEASSERT | + BD_LIFM | BD_PKT_INT_EN; + + /* set base address BD list for DMA engine */ + rdesc = list_first_entry(&sqi->bd_list_used, struct ring_desc, list); + writel(rdesc->bd_dma, sqi->regs + PESQI_BD_BASE_ADDR_REG); + + /* enable interrupt */ + pic32_sqi_enable_int(sqi); + + /* enable DMA engine */ + val = PESQI_DMA_EN | PESQI_POLL_EN | PESQI_BDP_START; + writel(val, sqi->regs + PESQI_BD_CTRL_REG); + + /* wait for xfer completion */ + ret = wait_for_completion_timeout(&sqi->xfer_done, 5 * HZ); + if (ret <= 0) { + dev_err(&sqi->master->dev, "wait timedout/interrupted\n"); + ret = -EIO; + msg->status = ret; + } else { + /* success */ + msg->status = 0; + ret = 0; + } + + /* disable DMA */ + writel(0, sqi->regs + PESQI_BD_CTRL_REG); + + pic32_sqi_disable_int(sqi); + +xfer_out: + /* unmap dma memory */ + list_for_each_entry_reverse(xfer, &msg->transfers, transfer_list) + pic32_sqi_unmap_transfer(sqi, xfer); + + list_for_each_entry_safe_reverse(rdesc, next, + &sqi->bd_list_used, list) { + /* Update total byte transferred */ + msg->actual_length += rdesc->xfer_len; + /* release ring descr */ + ring_desc_put(sqi, rdesc); + } + spi_finalize_current_message(spi->master); + + return ret; +} + +static int pic32_sqi_unprepare_hardware(struct spi_master *master) +{ + struct pic32_sqi *sqi = spi_master_get_devdata(master); + + /* disable clk */ + pic32_clrbits(sqi->regs + PESQI_CLK_CTRL_REG, PESQI_CLK_EN); + /* disable spi */ + pic32_clrbits(sqi->regs + PESQI_CONF_REG, PESQI_EN); + + return 0; +} + +/* This may be called twice for each spi dev */ +static int pic32_sqi_setup(struct spi_device *spi) +{ + struct pic32_sqi *sqi; + + if (spi_get_ctldata(spi)) { + dev_err(&spi->dev, "is already associated\n"); + return -EBUSY; + } + + /* check word size */ + if (!spi->bits_per_word) { + dev_err(&spi->dev, "No bits_per_word defined\n"); + return -EINVAL; + } + + /* check maximum SPI clk rate */ + if (!spi->max_speed_hz) { + dev_err(&spi->dev, "No max speed HZ parameter\n"); + return -EINVAL; + } + + if (spi->master->max_speed_hz < spi->max_speed_hz) { + dev_err(&spi->dev, "max speed %u HZ is too high\n", + spi->max_speed_hz); + return -EINVAL; + } + + sqi = spi_master_get_devdata(spi->master); + spi_set_ctldata(spi, (void *)sqi); + + return 0; +} + +static void pic32_sqi_cleanup(struct spi_device *spi) +{ + spi_set_ctldata(spi, (void *)NULL); +} + +static int ring_desc_ring_alloc(struct pic32_sqi *sqi) +{ + struct ring_desc *rdesc; + struct buf_desc *bd; + int i; + + /* allocate coherent memory for hardware buffer descriptors. */ + sqi->bd = dma_zalloc_coherent(&sqi->master->dev, + sizeof(*bd) * PESQI_BD_COUNT, + &sqi->bd_dma, GFP_DMA32); + if (!sqi->bd) { + dev_err(&sqi->master->dev, "failed allocating dma buffer\n"); + return -ENOMEM; + } + + /* allocate software ring descriptors */ + sqi->ring = devm_kcalloc(&sqi->master->dev, PESQI_BD_COUNT, + sizeof(*rdesc), GFP_KERNEL); + if (!sqi->ring) { + dma_free_coherent(&sqi->master->dev, + sizeof(*bd) * PESQI_BD_COUNT, + sqi->bd, sqi->bd_dma); + return -ENOMEM; + } + + bd = (struct buf_desc *)sqi->bd; + + INIT_LIST_HEAD(&sqi->bd_list_free); + INIT_LIST_HEAD(&sqi->bd_list_used); + + /* initialize ring-desc */ + for (i = 0, rdesc = sqi->ring; i < PESQI_BD_COUNT; i++, rdesc++) { + INIT_LIST_HEAD(&rdesc->list); + rdesc->bd = &bd[i]; + rdesc->bd_dma = sqi->bd_dma + (void *)&bd[i] - (void *)bd; + list_add_tail(&rdesc->list, &sqi->bd_list_free); + } + + /* Prepare BD: chain to next BD(s) */ + for (i = 0, rdesc = sqi->ring; i < PESQI_BD_COUNT; i++) + bd[i].bd_nextp = rdesc[i + 1].bd_dma; + bd[PESQI_BD_COUNT - 1].bd_nextp = 0; + + return 0; +} + +static void ring_desc_ring_free(struct pic32_sqi *sqi) +{ + dma_free_coherent(&sqi->master->dev, + sizeof(struct buf_desc) * PESQI_BD_COUNT, + sqi->bd, sqi->bd_dma); +} + +static void pic32_sqi_hw_init(struct pic32_sqi *sqi) +{ + unsigned long flags; + u32 val; + + /* Soft-reset of PESQI controller triggers interrupt. + * We are not yet ready to handle them so disable CPU + * interrupt for the time being. + */ + local_irq_save(flags); + + /* assert soft-reset */ + writel(PESQI_SOFT_RESET, sqi->regs + PESQI_CONF_REG); + + /* wait until clear */ + readl_poll_timeout_atomic(sqi->regs + PESQI_CONF_REG, val, + !(val & PESQI_SOFT_RESET), 1, 5000); + + /* disable all interrupts */ + pic32_sqi_disable_int(sqi); + + /* Now it is safe to enable back CPU interrupt */ + local_irq_restore(flags); + + /* tx and rx fifo interrupt threshold */ + val = readl(sqi->regs + PESQI_CMD_THRES_REG); + val &= ~(PESQI_TXTHR_MASK << PESQI_TXTHR_SHIFT); + val &= ~(PESQI_RXTHR_MASK << PESQI_RXTHR_SHIFT); + val |= (1U << PESQI_TXTHR_SHIFT) | (1U << PESQI_RXTHR_SHIFT); + writel(val, sqi->regs + PESQI_CMD_THRES_REG); + + val = readl(sqi->regs + PESQI_INT_THRES_REG); + val &= ~(PESQI_TXTHR_MASK << PESQI_TXTHR_SHIFT); + val &= ~(PESQI_RXTHR_MASK << PESQI_RXTHR_SHIFT); + val |= (1U << PESQI_TXTHR_SHIFT) | (1U << PESQI_RXTHR_SHIFT); + writel(val, sqi->regs + PESQI_INT_THRES_REG); + + /* default configuration */ + val = readl(sqi->regs + PESQI_CONF_REG); + + /* set mode: DMA */ + val &= ~PESQI_MODE; + val |= PESQI_MODE_DMA << PESQI_MODE_SHIFT; + writel(val, sqi->regs + PESQI_CONF_REG); + + /* DATAEN - SQIID0-ID3 */ + val |= PESQI_QUAD_LANE << PESQI_LANES_SHIFT; + + /* burst/INCR4 enable */ + val |= PESQI_BURST_EN; + + /* CSEN - all CS */ + val |= 3U << PESQI_CSEN_SHIFT; + writel(val, sqi->regs + PESQI_CONF_REG); + + /* write poll count */ + writel(0, sqi->regs + PESQI_BD_POLL_CTRL_REG); + + sqi->cur_speed = 0; + sqi->cur_mode = -1; +} + +static int pic32_sqi_probe(struct platform_device *pdev) +{ + struct spi_master *master; + struct pic32_sqi *sqi; + struct resource *reg; + int ret; + + master = spi_alloc_master(&pdev->dev, sizeof(*sqi)); + if (!master) + return -ENOMEM; + + sqi = spi_master_get_devdata(master); + sqi->master = master; + + reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); + sqi->regs = devm_ioremap_resource(&pdev->dev, reg); + if (!sqi->regs) { + dev_err(&pdev->dev, "mem map failed\n"); + ret = -EBUSY; + goto err_free_master; + } + + /* irq resource */ + sqi->irq = platform_get_irq(pdev, 0); + if (sqi->irq < 0) { + dev_err(&pdev->dev, "no irq found\n"); + ret = sqi->irq; + goto err_free_master; + } + + /* clock */ + sqi->sys_clk = devm_clk_get(&pdev->dev, "reg_ck"); + if (IS_ERR(sqi->sys_clk)) { + ret = PTR_ERR(sqi->sys_clk); + dev_err(&pdev->dev, "no sys_clk ?\n"); + goto err_free_master; + } + + sqi->base_clk = devm_clk_get(&pdev->dev, "spi_ck"); + if (IS_ERR(sqi->base_clk)) { + ret = PTR_ERR(sqi->base_clk); + dev_err(&pdev->dev, "no base clk ?\n"); + goto err_free_master; + } + + clk_prepare_enable(sqi->sys_clk); + clk_prepare_enable(sqi->base_clk); + + init_completion(&sqi->xfer_done); + + /* initialize hardware */ + pic32_sqi_hw_init(sqi); + + /* allocate buffers & descriptors */ + ret = ring_desc_ring_alloc(sqi); + if (ret) { + dev_err(&pdev->dev, "ring alloc failed\n"); + goto err_disable_hw; + } + + /* install irq handlers */ + ret = devm_request_irq(&pdev->dev, sqi->irq, pic32_sqi_isr, + 0, dev_name(&pdev->dev), sqi); + if (ret < 0) { + dev_err(&pdev->dev, "request-irq %d, failed ?\n", sqi->irq); + goto err_free_ring; + } + + /* register master */ + master->num_chipselect = 2; + master->max_speed_hz = clk_get_rate(sqi->base_clk); + master->dma_alignment = 32; + master->dev.of_node = of_node_get(pdev->dev.of_node); + master->mode_bits = SPI_MODE_3 | SPI_MODE_0 | SPI_TX_DUAL | + SPI_RX_DUAL | SPI_TX_QUAD | SPI_RX_QUAD; + master->flags = SPI_MASTER_HALF_DUPLEX; + master->setup = pic32_sqi_setup; + master->cleanup = pic32_sqi_cleanup; + master->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 32); + master->transfer_one_message = pic32_sqi_one_message; + master->prepare_transfer_hardware = pic32_sqi_prepare_hardware; + master->unprepare_transfer_hardware = pic32_sqi_unprepare_hardware; + + ret = devm_spi_register_master(&pdev->dev, master); + if (ret) { + dev_err(&master->dev, "failed registering spi master\n"); + goto err_free_ring; + } + + platform_set_drvdata(pdev, sqi); + + return 0; + +err_free_ring: + ring_desc_ring_free(sqi); +err_disable_hw: + /* disable clk */ + clk_disable_unprepare(sqi->base_clk); + clk_disable_unprepare(sqi->sys_clk); +err_free_master: + spi_master_put(master); + return ret; +} + +static int pic32_sqi_remove(struct platform_device *pdev) +{ + struct pic32_sqi *sqi = platform_get_drvdata(pdev); + + clk_disable_unprepare(sqi->base_clk); + clk_disable_unprepare(sqi->sys_clk); + + /* release memory */ + ring_desc_ring_free(sqi); + + return 0; +} + +static const struct of_device_id pic32_sqi_of_ids[] = { + {.compatible = "microchip,pic32mzda-sqi",}, + {}, +}; +MODULE_DEVICE_TABLE(of, pic32_sqi_of_ids); + +static struct platform_driver pic32_sqi_driver = { + .driver = { + .name = "sqi-pic32", + .of_match_table = of_match_ptr(pic32_sqi_of_ids), + }, + .probe = pic32_sqi_probe, + .remove = pic32_sqi_remove, +}; + +module_platform_driver(pic32_sqi_driver); + +MODULE_AUTHOR("Purna Chandra Mandal "); +MODULE_DESCRIPTION("Microchip SPI driver for PIC32 SQI controller."); +MODULE_LICENSE("GPL v2");