diff mbox

[4/4] spi: s3c64xx: restore removed comments

Message ID 1467980304-14093-5-git-send-email-andi.shyti@samsung.com (mailing list archive)
State New, archived
Headers show

Commit Message

Andi Shyti July 8, 2016, 12:18 p.m. UTC
Patch a9e93e8 has erroneously removed some comments which are
important to understand why the bus frequency is multiplied by
two during the spi transfer.

Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
---
 drivers/spi/spi-s3c64xx.c | 2 ++
 1 file changed, 2 insertions(+)

Comments

Krzysztof Kozlowski July 8, 2016, 12:52 p.m. UTC | #1
On 07/08/2016 02:18 PM, Andi Shyti wrote:
> Patch a9e93e8 has erroneously removed some comments which are
> important to understand why the bus frequency is multiplied by
> two during the spi transfer.
> 
> Signed-off-by: Andi Shyti <andi.shyti@samsung.com>
> ---
>  drivers/spi/spi-s3c64xx.c | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
> index 1874bc5..d1fe100 100644
> --- a/drivers/spi/spi-s3c64xx.c
> +++ b/drivers/spi/spi-s3c64xx.c
> @@ -639,6 +639,8 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
>  	writel(val, regs + S3C64XX_SPI_MODE_CFG);
>  
>  	if (sdd->port_conf->clk_from_cmu) {
> +		/* Configure Clock */
> +		/* There is half-multiplier before the SPI */

Not a kernel coding style comment. :) Either proper one or just skip the
"configure clock" as it is meaningless.

BR,
Krzysztof

>  		clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
>  	} else {
>  		/* Configure Clock */
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 1874bc5..d1fe100 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -639,6 +639,8 @@  static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd)
 	writel(val, regs + S3C64XX_SPI_MODE_CFG);
 
 	if (sdd->port_conf->clk_from_cmu) {
+		/* Configure Clock */
+		/* There is half-multiplier before the SPI */
 		clk_set_rate(sdd->src_clk, sdd->cur_speed * 2);
 	} else {
 		/* Configure Clock */