diff mbox series

[v2,3/5] arm64: dts: lx2160a: add FlexSPI node property

Message ID 1537177710-9379-4-git-send-email-yogeshnarayan.gaur@nxp.com (mailing list archive)
State Superseded
Headers show
Series spi: spi-mem: Add driver for NXP FlexSPI controller | expand

Commit Message

Yogesh Narayan Gaur Sept. 17, 2018, 9:48 a.m. UTC 
Add fspi node property for LX2160A SoC for FlexSPI driver.
Property added for the FlexSPI controller and for the connected
slave device for the LX2160ARDB target.
This is having two SPI-NOR flash device, mt35xu512aba, connected
at CS0 and CS1.

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
---
Changes for v2:
- Incorporated Shawn review comments.

 arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 22 ++++++++++++++++++++++
 arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi    | 12 ++++++++++++
 2 files changed, 34 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
index 70fad20..a320b37 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts
@@ -32,6 +32,28 @@ 
 	status = "okay";
 };
 
+&fspi {
+	status = "okay";
+
+	mt35xu512aba0: flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,m25p80";
+		m25p,fast-read;
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+	};
+
+	mt35xu512aba1: flash@1 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "spansion,m25p80";
+		m25p,fast-read;
+		spi-max-frequency = <20000000>;
+		reg = <1>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 	pca9547@77 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index e35e494..bd2d606 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -568,5 +568,17 @@ 
 			timeout-sec = <30>;
 		};
 
+		fspi: flexspi@20c0000 {
+			compatible = "nxp,lx2160a-fspi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0 0x20c0000 0x0 0x10000>,
+				<0x0 0x20000000 0x0 0x10000000>;
+			reg-names = "fspi_base", "fspi_mmap";
+			interrupts = <0 25 0x4>; /* Level high type */
+			clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+			clock-names = "fspi_en", "fspi";
+			status = "disabled";
+		};
 	};
 };