| Message ID | 1578673089-3484-14-git-send-email-claudiu.beznea@microchip.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | add device tree for SAM9X60 SoC and SAM9X60-EK board | expand |
On Fri, Jan 10, 2020 at 06:18:05PM +0200, Claudiu Beznea wrote: > Remove chip whildcard and introduce the list of compatibles instead. > > Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> > --- > Documentation/devicetree/bindings/mfd/atmel-usart.txt | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt > index 699fd3c9ace8..09013c49f6cc 100644 > --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt > +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt > @@ -1,10 +1,11 @@ > * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) > > Required properties for USART: > -- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu" > - The compatible <chip> indicated will be the first SoC to support an > - additional mode or an USART new feature. > - For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart" > +- compatible: Should be one of the following: > + - "atmel,at91rm9200-usart" > + - "atmel,at91sam9260-usart" > + - "atmel,at91rm9200-dbgu" > + - "atmel,at91sam9260-dbgu" Should be: "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" > - reg: Should contain registers location and length > - interrupts: Should contain interrupt > - clock-names: tuple listing input clock names. > -- > 2.7.4 >
diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt index 699fd3c9ace8..09013c49f6cc 100644 --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt @@ -1,10 +1,11 @@ * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) Required properties for USART: -- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu" - The compatible <chip> indicated will be the first SoC to support an - additional mode or an USART new feature. - For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart" +- compatible: Should be one of the following: + - "atmel,at91rm9200-usart" + - "atmel,at91sam9260-usart" + - "atmel,at91rm9200-dbgu" + - "atmel,at91sam9260-dbgu" - reg: Should contain registers location and length - interrupts: Should contain interrupt - clock-names: tuple listing input clock names.
Remove chip whildcard and introduce the list of compatibles instead. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> --- Documentation/devicetree/bindings/mfd/atmel-usart.txt | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)