@@ -335,8 +335,10 @@ static int mxic_spi_data_xfer(struct mxic_spi *mxic, const void *txbuf,
static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
const struct spi_mem_op *op)
{
- if (op->data.buswidth > 4 || op->addr.buswidth > 4 ||
- op->dummy.buswidth > 4 || op->cmd.buswidth > 4)
+ bool all_false;
+
+ if (op->data.buswidth > 8 || op->addr.buswidth > 8 ||
+ op->dummy.buswidth > 8 || op->cmd.buswidth > 8)
return false;
if (op->data.nbytes && op->dummy.nbytes &&
@@ -346,7 +348,13 @@ static bool mxic_spi_mem_supports_op(struct spi_mem *mem,
if (op->addr.nbytes > 7)
return false;
- return spi_mem_default_supports_op(mem, op);
+ all_false = !op->cmd.dtr && !op->addr.dtr && !op->dummy.dtr &&
+ !op->data.dtr;
+
+ if (all_false)
+ return spi_mem_default_supports_op(mem, op);
+ else
+ return spi_mem_dtr_supports_op(mem, op);
}
static int mxic_spi_mem_exec_op(struct spi_mem *mem,
@@ -355,14 +363,15 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
struct mxic_spi *mxic = spi_master_get_devdata(mem->spi->master);
int nio = 1, i, ret;
u32 ss_ctrl;
- u8 addr[8];
- u8 opcode = op->cmd.opcode;
+ u8 addr[8], cmd[2];
ret = mxic_spi_set_freq(mxic, mem->spi->max_speed_hz);
if (ret)
return ret;
- if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD))
+ if (mem->spi->mode & (SPI_TX_OCTAL | SPI_RX_OCTAL))
+ nio = 8;
+ else if (mem->spi->mode & (SPI_TX_QUAD | SPI_RX_QUAD))
nio = 4;
else if (mem->spi->mode & (SPI_TX_DUAL | SPI_RX_DUAL))
nio = 2;
@@ -374,19 +383,25 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
mxic->regs + HC_CFG);
writel(HC_EN_BIT, mxic->regs + HC_EN);
- ss_ctrl = OP_CMD_BYTES(1) | OP_CMD_BUSW(fls(op->cmd.buswidth) - 1);
+ ss_ctrl = OP_CMD_BYTES(op->cmd.nbytes) |
+ OP_CMD_BUSW(fls(op->cmd.buswidth) - 1) |
+ (op->cmd.dtr ? OP_CMD_DDR : 0);
if (op->addr.nbytes)
ss_ctrl |= OP_ADDR_BYTES(op->addr.nbytes) |
- OP_ADDR_BUSW(fls(op->addr.buswidth) - 1);
+ OP_ADDR_BUSW(fls(op->addr.buswidth) - 1) |
+ (op->addr.dtr ? OP_ADDR_DDR : 0);
if (op->dummy.nbytes)
ss_ctrl |= OP_DUMMY_CYC(op->dummy.nbytes);
if (op->data.nbytes) {
- ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1);
+ ss_ctrl |= OP_DATA_BUSW(fls(op->data.buswidth) - 1) |
+ (op->data.dtr ? OP_DATA_DDR : 0);
if (op->data.dir == SPI_MEM_DATA_IN)
ss_ctrl |= OP_READ;
+ if (op->data.dtr)
+ ss_ctrl |= OP_DQS_EN;
}
writel(ss_ctrl, mxic->regs + SS_CTRL(mem->spi->chip_select));
@@ -394,7 +409,10 @@ static int mxic_spi_mem_exec_op(struct spi_mem *mem,
writel(readl(mxic->regs + HC_CFG) | HC_CFG_MAN_CS_ASSERT,
mxic->regs + HC_CFG);
- ret = mxic_spi_data_xfer(mxic, &opcode, NULL, 1);
+ for (i = 0; i < op->cmd.nbytes; i++)
+ cmd[i] = op->cmd.opcode >> (8 * (op->cmd.nbytes - i - 1));
+
+ ret = mxic_spi_data_xfer(mxic, cmd, NULL, op->cmd.nbytes);
if (ret)
goto out;
@@ -567,7 +585,8 @@ static int mxic_spi_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->mode_bits = SPI_CPOL | SPI_CPHA |
SPI_RX_DUAL | SPI_TX_DUAL |
- SPI_RX_QUAD | SPI_TX_QUAD;
+ SPI_RX_QUAD | SPI_TX_QUAD |
+ SPI_RX_OCTAL | SPI_TX_OCTAL;
mxic_spi_hw_init(mxic);
Driver patch for octal DTR mode support. Owing to the spi_mem_default_supports_op() is not support dtr operation. Based on Pratyush patch "spi: spi-mem: add spi_mem_dtr _supports_op()" add spi_mem_dtr_supports_op() to support dtr and keep checking the buswidth and command bytes. Signed-off-by: Zhengxun Li <zhengxunli@mxic.com.tw> --- drivers/spi/spi-mxic.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-)