| Message ID | 1631534684-8273-1-git-send-email-pthombar@cadence.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | add support for Cadence's XSPI controller | expand |
On Mon, Sep 13, 2021 at 02:04:44PM +0200, Parshuram Thombare wrote: > Add DT binding for Cadence's XSPI controller driver. > > Signed-off-by: Konrad Kociolek <konrad@cadence.com> > Signed-off-by: Jayshri Pawar <jpawar@cadence.com> > Signed-off-by: Parshuram Thombare <pthombar@cadence.com> > --- > .../devicetree/bindings/spi/cdns,xspi.yaml | 77 ++++++++++++++++++++++ > 1 file changed, 77 insertions(+) > create mode 100644 Documentation/devicetree/bindings/spi/cdns,xspi.yaml > > diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml > new file mode 100644 > index 0000000..5ebede1 > --- /dev/null > +++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml > @@ -0,0 +1,77 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +# Copyright 2020-21 Cadence > +%YAML 1.2 > +--- > +$id: "http://devicetree.org/schemas/spi/cdns,xspi.yaml#" > +$schema: "http://devicetree.org/meta-schemas/core.yaml#" > + > +title: Cadence XSPI Controller > + > +maintainers: > + - Parshuram Thombare <pthombar@cadence.com> > + > +description: | > + The XSPI controller allows SPI protocol communication in > + single, dual, quad or octal wire transmission modes for > + read/write access to slaves such as SPI-NOR flash. > + > +allOf: > + - $ref: "spi-controller.yaml#" > + > +properties: > + compatible: > + const: cdns,xspi-nor > + > + reg: > + items: > + - description: address and length of the controller register set > + - description: address and length of the Slave DMA data port > + - description: address and length of the auxiliary registers > + > + reg-names: > + items: > + - const: xspi-iobase > + - const: xspi-sdmabase > + - const: xspi-auxbase 'xspi' and 'base' are redundant. So just io, sdma, and aux. > + > + interrupts: > + maxItems: 1 > + > +required: > + - compatible > + - reg > + - interrupts > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/interrupt-controller/irq.h> > + bus { > + #address-cells = <2>; > + #size-cells = <2>; > + > + xspi: spi@a0010000 { > + #address-cells = <1>; > + #size-cells = <0>; > + compatible = "cdns,xspi-nor"; > + reg = <0x0 0xa0010000 0x0 0x10000>, > + <0x0 0xb0000000 0x0 0x10000>, > + <0x0 0xa0020000 0x0 0x10000>; Unless you are really using 64KB of registers, that wastes a bunch of virtual space which is limited on 32-bit platforms. > + reg-names = "xspi-iobase", "xspi-sdmabase", "xspi-auxbase"; > + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-parent = <&gic>; > + > + flash@0 { > + compatible = "jedec,spi-nor"; > + spi-max-frequency = <75000000>; > + reg = <0>; > + }; > + > + flash@1 { > + compatible = "jedec,spi-nor"; > + spi-max-frequency = <75000000>; > + reg = <1>; > + }; > + }; > + }; > -- > 2.7.4 > >
diff --git a/Documentation/devicetree/bindings/spi/cdns,xspi.yaml b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml new file mode 100644 index 0000000..5ebede1 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/cdns,xspi.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2020-21 Cadence +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/spi/cdns,xspi.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Cadence XSPI Controller + +maintainers: + - Parshuram Thombare <pthombar@cadence.com> + +description: | + The XSPI controller allows SPI protocol communication in + single, dual, quad or octal wire transmission modes for + read/write access to slaves such as SPI-NOR flash. + +allOf: + - $ref: "spi-controller.yaml#" + +properties: + compatible: + const: cdns,xspi-nor + + reg: + items: + - description: address and length of the controller register set + - description: address and length of the Slave DMA data port + - description: address and length of the auxiliary registers + + reg-names: + items: + - const: xspi-iobase + - const: xspi-sdmabase + - const: xspi-auxbase + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + bus { + #address-cells = <2>; + #size-cells = <2>; + + xspi: spi@a0010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "cdns,xspi-nor"; + reg = <0x0 0xa0010000 0x0 0x10000>, + <0x0 0xb0000000 0x0 0x10000>, + <0x0 0xa0020000 0x0 0x10000>; + reg-names = "xspi-iobase", "xspi-sdmabase", "xspi-auxbase"; + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; + interrupt-parent = <&gic>; + + flash@0 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <75000000>; + reg = <0>; + }; + + flash@1 { + compatible = "jedec,spi-nor"; + spi-max-frequency = <75000000>; + reg = <1>; + }; + }; + };