diff mbox series

[05/11] spi: spi-nxp-fspi: Add quirk to disable DTR support

Message ID 1657012303-6464-5-git-send-email-haibo.chen@nxp.com (mailing list archive)
State New, archived
Headers show
Series [01/11] spi: spi-nxp-fspi: enable runtime pm for fspi | expand

Commit Message

Bough Chen July 5, 2022, 9:11 a.m. UTC 
From: Haibo Chen <haibo.chen@nxp.com>

Not all platform currently supports octal DTR mode. lx2160a do not
implement DQS, this causes flash probe failure and therefore, provide
an option of quirk FSPI_QUIRK_DISABLE_DTR for platforms not support
DTR mode.

Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
---
 drivers/spi/spi-nxp-fspi.c | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

Comments

Michael Walle July 5, 2022, 1:50 p.m. UTC | #1 
Am 2022-07-05 11:11, schrieb haibo.chen@nxp.com:
> From: Haibo Chen <haibo.chen@nxp.com>
> 
> Not all platform currently supports octal DTR mode. lx2160a do not
> implement DQS, this causes flash probe failure and therefore, provide
> an option of quirk FSPI_QUIRK_DISABLE_DTR for platforms not support
> DTR mode.

You write "DQS is not supported" but your quirk targets DTR. DTR works
without DQS. DQS is needed for faster frequencies, no? So the quirk
should be named accordingly.

Also, this compatible is (unfortunately!) also used on for the LS1028A
SoC and as far as I know DQS is supported there. I'm not sure what to
do here. Maybe add a new compatible "nxp,ls1028a-fspi" and change the
device tree to
compatible = "nxp,ls1028a-fspi", "nxp,lx2160a";

-michael
diff mbox series

Patch

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index 34679dc0e1ad..61cf1b82c0d7 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -325,6 +325,9 @@ 
 /* Access flash memory using IP bus only */
 #define FSPI_QUIRK_USE_IP_ONLY	BIT(0)
 
+/* Disable DTR */
+#define FSPI_QUIRK_DISABLE_DTR	BIT(1)
+
 struct nxp_fspi_devtype_data {
 	unsigned int rxfifo;
 	unsigned int txfifo;
@@ -337,7 +340,7 @@  static struct nxp_fspi_devtype_data lx2160a_data = {
 	.rxfifo = SZ_512,       /* (64  * 64 bits)  */
 	.txfifo = SZ_1K,        /* (128 * 64 bits)  */
 	.ahb_buf_size = SZ_2K,  /* (256 * 64 bits)  */
-	.quirks = 0,
+	.quirks = FSPI_QUIRK_DISABLE_DTR,
 	.little_endian = true,  /* little-endian    */
 };
 
@@ -1149,10 +1152,14 @@  static const struct spi_controller_mem_ops nxp_fspi_mem_ops = {
 	.get_name = nxp_fspi_get_name,
 };
 
-static struct spi_controller_mem_caps nxp_fspi_mem_caps = {
+static const struct spi_controller_mem_caps nxp_fspi_mem_caps = {
 	.dtr = true,
 };
 
+static const struct spi_controller_mem_caps nxp_fspi_mem_caps_quirks = {
+	.dtr = false,
+};
+
 static int nxp_fspi_probe(struct platform_device *pdev)
 {
 	struct spi_controller *ctlr;
@@ -1257,7 +1264,10 @@  static int nxp_fspi_probe(struct platform_device *pdev)
 	ctlr->bus_num = -1;
 	ctlr->num_chipselect = NXP_FSPI_MAX_CHIPSELECT;
 	ctlr->mem_ops = &nxp_fspi_mem_ops;
-	ctlr->mem_caps = &nxp_fspi_mem_caps;
+	if (f->devtype_data->quirks & FSPI_QUIRK_DISABLE_DTR)
+		ctlr->mem_caps = &nxp_fspi_mem_caps_quirks;
+	else
+		ctlr->mem_caps = &nxp_fspi_mem_caps;
 
 	nxp_fspi_default_setup(f);