Message ID | 20191121091405.28384-1-peter.ujfalusi@ti.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | [v2] spi: pic32: Retire dma_request_slave_channel_compat() | expand |
On 21/11/2019 11.14, Peter Ujfalusi wrote: > There is no reason to use the dma_request_slave_channel_compat() as no > filter function and parameter is provided. > > Switch the driver to use dma_request_chan() instead and add support for > deferred probing against DMA channel. > > Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> > --- > Hi, > > Changes since v1: > - Handle deferred probing against DMA channel request. > > Trying to crack down on the use of dma_request_slave_channel_compat() in the > tree... > > Only compile tested! > > Regards, > Peter > > drivers/spi/spi-pic32.c | 46 +++++++++++++++++++++++++++-------------- > 1 file changed, 30 insertions(+), 16 deletions(-) > > diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c > index 69f517ec59c6..bb6a6643bcd3 100644 > --- a/drivers/spi/spi-pic32.c > +++ b/drivers/spi/spi-pic32.c > @@ -606,25 +606,30 @@ static void pic32_spi_cleanup(struct spi_device *spi) > gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); > } > > -static void pic32_spi_dma_prep(struct pic32_spi *pic32s, struct device *dev) > +static int pic32_spi_dma_prep(struct pic32_spi *pic32s, struct device *dev) > { > struct spi_master *master = pic32s->master; > - dma_cap_mask_t mask; > + int ret = 0; > > - dma_cap_zero(mask); > - dma_cap_set(DMA_SLAVE, mask); > + master->dma_rx = dma_request_chan(dev, "spi-rx"); > + if (IS_ERR(master->dma_rx)) { > + if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER) > + ret = -EPROBE_DEFER; > + else > + dev_warn(dev, "RX channel not found.\n"); > > - master->dma_rx = dma_request_slave_channel_compat(mask, NULL, NULL, > - dev, "spi-rx"); > - if (!master->dma_rx) { > - dev_warn(dev, "RX channel not found.\n"); > + master->dma_rx = NULL; > goto out_err; > } > > - master->dma_tx = dma_request_slave_channel_compat(mask, NULL, NULL, > - dev, "spi-tx"); > - if (!master->dma_tx) { > - dev_warn(dev, "TX channel not found.\n"); > + master->dma_tx = dma_request_chan(dev, "spi-tx"); > + if (IS_ERR(master->dma_tx)) { > + if (PTR_ERR(master->dma_tx) == -EPROBE_DEFER) > + ret = -EPROBE_DEFER; > + else > + dev_warn(dev, "RX channel not found.\n"); Sigh, copy-paste :( s/RX/TX > + > + master->dma_tx = NULL; > goto out_err; > } > > @@ -634,14 +639,20 @@ static void pic32_spi_dma_prep(struct pic32_spi *pic32s, struct device *dev) > /* DMA chnls allocated and prepared */ > set_bit(PIC32F_DMA_PREP, &pic32s->flags); > > - return; > + return 0; > > out_err: > - if (master->dma_rx) > + if (master->dma_rx) { > dma_release_channel(master->dma_rx); > + master->dma_rx = NULL; > + } > > - if (master->dma_tx) > + if (master->dma_tx) { > dma_release_channel(master->dma_tx); > + master->dma_tx = NULL; > + } > + > + return ret; > } > > static void pic32_spi_dma_unprep(struct pic32_spi *pic32s) > @@ -776,7 +787,10 @@ static int pic32_spi_probe(struct platform_device *pdev) > master->unprepare_transfer_hardware = pic32_spi_unprepare_hardware; > > /* optional DMA support */ > - pic32_spi_dma_prep(pic32s, &pdev->dev); > + ret = pic32_spi_dma_prep(pic32s, &pdev->dev); > + if (ret) > + goto err_bailout; > + > if (test_bit(PIC32F_DMA_PREP, &pic32s->flags)) > master->can_dma = pic32_spi_can_dma; > > - Péter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
diff --git a/drivers/spi/spi-pic32.c b/drivers/spi/spi-pic32.c index 69f517ec59c6..bb6a6643bcd3 100644 --- a/drivers/spi/spi-pic32.c +++ b/drivers/spi/spi-pic32.c @@ -606,25 +606,30 @@ static void pic32_spi_cleanup(struct spi_device *spi) gpio_direction_output(spi->cs_gpio, !(spi->mode & SPI_CS_HIGH)); } -static void pic32_spi_dma_prep(struct pic32_spi *pic32s, struct device *dev) +static int pic32_spi_dma_prep(struct pic32_spi *pic32s, struct device *dev) { struct spi_master *master = pic32s->master; - dma_cap_mask_t mask; + int ret = 0; - dma_cap_zero(mask); - dma_cap_set(DMA_SLAVE, mask); + master->dma_rx = dma_request_chan(dev, "spi-rx"); + if (IS_ERR(master->dma_rx)) { + if (PTR_ERR(master->dma_rx) == -EPROBE_DEFER) + ret = -EPROBE_DEFER; + else + dev_warn(dev, "RX channel not found.\n"); - master->dma_rx = dma_request_slave_channel_compat(mask, NULL, NULL, - dev, "spi-rx"); - if (!master->dma_rx) { - dev_warn(dev, "RX channel not found.\n"); + master->dma_rx = NULL; goto out_err; } - master->dma_tx = dma_request_slave_channel_compat(mask, NULL, NULL, - dev, "spi-tx"); - if (!master->dma_tx) { - dev_warn(dev, "TX channel not found.\n"); + master->dma_tx = dma_request_chan(dev, "spi-tx"); + if (IS_ERR(master->dma_tx)) { + if (PTR_ERR(master->dma_tx) == -EPROBE_DEFER) + ret = -EPROBE_DEFER; + else + dev_warn(dev, "RX channel not found.\n"); + + master->dma_tx = NULL; goto out_err; } @@ -634,14 +639,20 @@ static void pic32_spi_dma_prep(struct pic32_spi *pic32s, struct device *dev) /* DMA chnls allocated and prepared */ set_bit(PIC32F_DMA_PREP, &pic32s->flags); - return; + return 0; out_err: - if (master->dma_rx) + if (master->dma_rx) { dma_release_channel(master->dma_rx); + master->dma_rx = NULL; + } - if (master->dma_tx) + if (master->dma_tx) { dma_release_channel(master->dma_tx); + master->dma_tx = NULL; + } + + return ret; } static void pic32_spi_dma_unprep(struct pic32_spi *pic32s) @@ -776,7 +787,10 @@ static int pic32_spi_probe(struct platform_device *pdev) master->unprepare_transfer_hardware = pic32_spi_unprepare_hardware; /* optional DMA support */ - pic32_spi_dma_prep(pic32s, &pdev->dev); + ret = pic32_spi_dma_prep(pic32s, &pdev->dev); + if (ret) + goto err_bailout; + if (test_bit(PIC32F_DMA_PREP, &pic32s->flags)) master->can_dma = pic32_spi_can_dma;
There is no reason to use the dma_request_slave_channel_compat() as no filter function and parameter is provided. Switch the driver to use dma_request_chan() instead and add support for deferred probing against DMA channel. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- Hi, Changes since v1: - Handle deferred probing against DMA channel request. Trying to crack down on the use of dma_request_slave_channel_compat() in the tree... Only compile tested! Regards, Peter drivers/spi/spi-pic32.c | 46 +++++++++++++++++++++++++++-------------- 1 file changed, 30 insertions(+), 16 deletions(-)