deleted file mode 100644
@@ -1,58 +0,0 @@
-* Rockchip SPI Controller
-
-The Rockchip SPI controller is used to interface with various devices such as flash
-and display controllers using the SPI communication interface.
-
-Required Properties:
-
-- compatible: should be one of the following.
- "rockchip,rv1108-spi" for rv1108 SoCs.
- "rockchip,px30-spi", "rockchip,rk3066-spi" for px30 SoCs.
- "rockchip,rk3036-spi" for rk3036 SoCS.
- "rockchip,rk3066-spi" for rk3066 SoCs.
- "rockchip,rk3188-spi" for rk3188 SoCs.
- "rockchip,rk3228-spi" for rk3228 SoCS.
- "rockchip,rk3288-spi" for rk3288 SoCs.
- "rockchip,rk3368-spi" for rk3368 SoCs.
- "rockchip,rk3399-spi" for rk3399 SoCs.
-- reg: physical base address of the controller and length of memory mapped
- region.
-- interrupts: The interrupt number to the cpu. The interrupt specifier format
- depends on the interrupt controller.
-- clocks: Must contain an entry for each entry in clock-names.
-- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for
- the peripheral clock.
-- #address-cells: should be 1.
-- #size-cells: should be 0.
-
-Optional Properties:
-
-- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
- Documentation/devicetree/bindings/dma/dma.txt
-- dma-names: DMA request names should include "tx" and "rx" if present.
-- rx-sample-delay-ns: nanoseconds to delay after the SCLK edge before sampling
- Rx data (may need to be fine tuned for high capacitance lines).
- No delay (0) by default.
-- pinctrl-names: Names for the pin configuration(s); may be "default" or
- "sleep", where the "sleep" configuration may describe the state
- the pins should be in during system suspend. See also
- pinctrl/pinctrl-bindings.txt.
-
-
-Example:
-
- spi0: spi@ff110000 {
- compatible = "rockchip,rk3066-spi";
- reg = <0xff110000 0x1000>;
- dmas = <&pdma1 11>, <&pdma1 12>;
- dma-names = "tx", "rx";
- rx-sample-delay-ns = <10>;
- #address-cells = <1>;
- #size-cells = <0>;
- interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
- clock-names = "spiclk", "apb_pclk";
- pinctrl-0 = <&spi1_pins>;
- pinctrl-1 = <&spi1_sleep>;
- pinctrl-names = "default", "sleep";
- };
new file mode 100644
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/spi-rockchip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip SPI Controller
+
+description:
+ The Rockchip SPI controller is used to interface with various devices such
+ as flash and display controllers using the SPI communication interface.
+
+allOf:
+ - $ref: "spi-controller.yaml#"
+
+maintainers:
+ - Heiko Stuebner <heiko@sntech.de>
+
+# Everything else is described in the common file
+properties:
+ compatible:
+ oneOf:
+ - const: rockchip,rk3036-spi #for rk3036 SoCS.
+ - const: rockchip,rk3066-spi #for rk3066 SoCs.
+ - const: rockchip,rk3228-spi #for rk3228 SoCS.
+ - const: rockchip,rv1108-spi #for rv1108 SoCs.
+ - items:
+ - enum:
+ - rockchip,px30-spi #for px30 SoCs.
+ - rockchip,rk3188-spi #for rk3188 SoCs.
+ - rockchip,rk3288-spi #for rk3288 SoCs.
+ - rockchip,rk3368-spi #for rk3368 SoCs.
+ - rockchip,rk3399-spi #for rk3399 SoCs.
+ - const: rockchip,rk3066-spi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: transfer-clock
+ - description: peripheral clock
+
+ clock-names:
+ items:
+ - const: spiclk
+ - const: apb_pclk
+
+ dmas:
+ items:
+ - description: TX DMA Channel
+ - description: RX DMA Channel
+
+ dma-names:
+ items:
+ - const: tx
+ - const: rx
+
+ rx-sample-delay-ns:
+ default: 0
+ description:
+ Nano seconds to delay after the SCLK edge before sampling Rx data
+ (may need to be fine tuned for high capacitance lines).
+ If not specified 0 will be used.
+
+ pinctrl-names:
+ minItems: 1
+ items:
+ - const: default
+ - const: sleep
+ description:
+ Names for the pin configuration(s); may be "default" or "sleep",
+ where the "sleep" configuration may describe the state
+ the pins should be in during system suspend.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/rk3188-cru-common.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+ spi0: spi@ff110000 {
+ compatible = "rockchip,rk3066-spi";
+ reg = <0xff110000 0x1000>;
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
+ clock-names = "spiclk", "apb_pclk";
+ dmas = <&pdma1 11>, <&pdma1 12>;
+ dma-names = "tx", "rx";
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-1 = <&spi1_sleep>;
+ pinctrl-names = "default", "sleep";
+ rx-sample-delay-ns = <10>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
@@ -2240,6 +2240,7 @@ L: linux-rockchip@lists.infradead.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git
S: Maintained
F: Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
+F: Documentation/devicetree/bindings/spi/spi-rockchip.yaml
F: arch/arm/boot/dts/rk3*
F: arch/arm/boot/dts/rv1108*
F: arch/arm/mach-rockchip/
Current dts files with 'spi' nodes are manually verified. In order to automate this process spi-rockchip.txt has to be converted to yaml. In the new setup spi-rockchip.yaml will inherit properties from spi-controller.yaml. Add document to MAINTAINERS. Also rk3188.dtsi, rk3288.dtsi, rk3368.dtsi and rk3399.dtsi use an extra fallback string, so change this in the documentation. Changed: "rockchip,rk3188-spi", "rockchip,rk3066-spi" "rockchip,rk3288-spi", "rockchip,rk3066-spi" "rockchip,rk3368-spi", "rockchip,rk3066-spi" "rockchip,rk3399-spi", "rockchip,rk3066-spi" Signed-off-by: Johan Jonker <jbx6244@gmail.com> --- .../devicetree/bindings/spi/spi-rockchip.txt | 58 ------------ .../devicetree/bindings/spi/spi-rockchip.yaml | 105 +++++++++++++++++++++ MAINTAINERS | 1 + 3 files changed, 106 insertions(+), 58 deletions(-) delete mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.txt create mode 100644 Documentation/devicetree/bindings/spi/spi-rockchip.yaml