From patchwork Wed Feb 26 09:37:03 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pratyush Yadav X-Patchwork-Id: 11405713 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 148821580 for ; Wed, 26 Feb 2020 09:38:14 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id DDD6E2465D for ; Wed, 26 Feb 2020 09:38:13 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="K2dTe32y" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1727890AbgBZJiJ (ORCPT ); Wed, 26 Feb 2020 04:38:09 -0500 Received: from lelv0143.ext.ti.com ([198.47.23.248]:40120 "EHLO lelv0143.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1727457AbgBZJiI (ORCPT ); Wed, 26 Feb 2020 04:38:08 -0500 Received: from lelv0265.itg.ti.com ([10.180.67.224]) by lelv0143.ext.ti.com (8.15.2/8.15.2) with ESMTP id 01Q9bu9B087237; Wed, 26 Feb 2020 03:37:56 -0600 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1582709876; bh=lx7klmR18LxVuDBU/ZZOyd+LtXGNVESbcjfzd3wnbNA=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=K2dTe32y4kF8csHn6wb1hcbI0Z5frqIt9bEAjintcG/+wYvrOaf3bOwTQrQywvlO3 Gbmlj6Nxz6dljt9tOtgbN9rwLwxfJSp7Q5JvxcOo6pk6phoanGnVfmVhcFWaMdv2Fp EvLtOua8qL2OaTJJFOLfDh4/oMGVbEU3SVttE1eo= Received: from DLEE108.ent.ti.com (dlee108.ent.ti.com [157.170.170.38]) by lelv0265.itg.ti.com (8.15.2/8.15.2) with ESMTPS id 01Q9buqo119249 (version=TLSv1.2 cipher=AES256-GCM-SHA384 bits=256 verify=FAIL); Wed, 26 Feb 2020 03:37:56 -0600 Received: from DLEE103.ent.ti.com (157.170.170.33) by DLEE108.ent.ti.com (157.170.170.38) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1847.3; Wed, 26 Feb 2020 03:37:55 -0600 Received: from lelv0327.itg.ti.com (10.180.67.183) by DLEE103.ent.ti.com (157.170.170.33) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1847.3 via Frontend Transport; Wed, 26 Feb 2020 03:37:55 -0600 Received: from pratyush-OptiPlex-790.dhcp.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by lelv0327.itg.ti.com (8.15.2/8.15.2) with ESMTP id 01Q9b4AG110613; Wed, 26 Feb 2020 03:37:52 -0600 From: Pratyush Yadav To: Tudor Ambarus , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Mark Brown , Rob Herring , Mark Rutland CC: Pratyush Yadav , , , , , Sekhar Nori Subject: [PATCH v2 11/11] mtd: spi-nor: add support for Cypress Semper flash Date: Wed, 26 Feb 2020 15:07:03 +0530 Message-ID: <20200226093703.19765-12-p.yadav@ti.com> X-Mailer: git-send-email 2.25.0 In-Reply-To: <20200226093703.19765-1-p.yadav@ti.com> References: <20200226093703.19765-1-p.yadav@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-spi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org The Cypress Semper flash is an xSPI compliant octal DTR flash. Add support for using it in octal DTR mode. The flash by default boots in a hybrid sector mode. Switch to uniform sector mode on boot. Use the default 20 dummy cycles for a read fast command. The SFDP programming on some older versions of the flash was incorrect. Fixes for that are included in the fixup hooks. Signed-off-by: Pratyush Yadav --- drivers/mtd/spi-nor/spi-nor.c | 191 ++++++++++++++++++++++++++++++++++ include/linux/mtd/spi-nor.h | 14 +++ 2 files changed, 205 insertions(+) diff --git a/drivers/mtd/spi-nor/spi-nor.c b/drivers/mtd/spi-nor/spi-nor.c index fdcc1b4abc3f..a01acecaa568 100644 --- a/drivers/mtd/spi-nor/spi-nor.c +++ b/drivers/mtd/spi-nor/spi-nor.c @@ -260,6 +260,12 @@ struct flash_info { #define JEDEC_MFR(info) ((info)->id[0]) +/* Forward declarations that will be used by s28hs512t_setup(). */ +static int spi_nor_default_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps); +static void spi_nor_set_pp_settings(struct spi_nor_pp_command *pp, + u8 opcode, enum spi_nor_protocol proto); + /** * spi_nor_spimem_setup_op() - Set up common properties of a spi-mem op. * @nor: pointer to a 'struct spi_nor' @@ -2241,6 +2247,64 @@ static int spi_nor_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) return ret; } +/** + * spi_nor_cypress_octal_enable() - Enable octal DTR mode on Cypress flashes. + * @nor: pointer to a 'struct spi_nor' + * + * This also sets the memory access latency cycles to 20, which is the default + * in the spi-nor framework. + * + * Return: 0 on success, -errno otherwise. + */ +static int spi_nor_cypress_octal_enable(struct spi_nor *nor) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width = 3; + int ret; + + /* Use 20 dummy cycles for memory array reads. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + *buf = SPINOR_REG_CYPRESS_CFR2V_MEMLAT_8_20; + op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR2V, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_warn(nor->dev, + "failed to set default memory latency value: %d\n", + ret); + return ret; + } + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; + + nor->read_dummy = 20; + + /* Set the octal and DTR enable bits. */ + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + *buf = SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN; + op = (struct spi_mem_op)SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR5V, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_warn(nor->dev, "Failed to enable octal DTR mode\n"); + return ret; + } + + return 0; +} + /** * spi_nor_sr1_bit6_quad_enable() - Set the Quad Enable BIT(6) in the Status * Register 1. @@ -2453,6 +2517,130 @@ static struct spi_nor_fixups gd25q256_fixups = { .default_init = gd25q256_default_init, }; +static int s28hs512t_setup(struct spi_nor *nor, + const struct spi_nor_hwcaps *hwcaps) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width = 3; + int ret; + + if (!nor->spimem) { + dev_err(nor->dev, + "operation not supported for non-spimem drivers\n"); + return -ENOTSUPP; + } + + /* + * This Cypress flash also supports hybrid sector sizes. Make sure + * uniform sector mode is selected. This is done by setting the bit + * CFR3N[3]. + */ + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR3N, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) + return ret; + + ret = spi_nor_write_enable(nor); + if (ret) + return ret; + + /* Set the uniform sector mode bit. */ + *buf |= SPINOR_REG_CYPRESS_CFR3N_UNISECT; + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_WR_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR3N, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_OUT(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) { + dev_err(nor->dev, "Failed to change to uniform sector mode\n"); + return ret; + } + + ret = spi_nor_wait_till_ready(nor); + if (ret) + return ret; + + return spi_nor_default_setup(nor, hwcaps); +} + +static void s28hs512t_default_init(struct spi_nor *nor) +{ + nor->params.octal_dtr_enable = spi_nor_cypress_octal_enable; + nor->params.setup = s28hs512t_setup; +} + +static void s28hs512t_post_sfdp_fixup(struct spi_nor *nor) +{ + /* + * On older versions of the flash the xSPI Profile 1.0 table has the + * 8D-8D-8D Fast Read opcode as 0x00. But it actually should be 0xEE. + */ + if (nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].opcode == 0) + nor->params.reads[SNOR_CMD_READ_8_8_8_DTR].opcode = + SPINOR_OP_CYPRESS_RD_FAST; + + /* This flash is also missing the 4-byte Page Program opcode bit. */ + spi_nor_set_pp_settings(&nor->params.page_programs[SNOR_CMD_PP], + SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); + /* + * Since xSPI Page Program opcode is backward compatible with + * Legacy SPI, use Legacy SPI opcode there as well. + */ + spi_nor_set_pp_settings(&nor->params.page_programs[SNOR_CMD_PP_8_8_8_DTR], + SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR); + + /* + * The xSPI Profile 1.0 table advertises the number of additional + * address bytes needed for Read Status Register command as 0 but the + * actual value for that is 4. + */ + nor->params.rdsr_addr_nbytes = 4; +} + +static int s28hs512t_post_bfpt_fixup(struct spi_nor *nor, + const struct sfdp_parameter_header *bfpt_header, + const struct sfdp_bfpt *bfpt, + struct spi_nor_flash_parameter *params) +{ + struct spi_mem_op op; + u8 *buf = nor->bouncebuf; + u8 addr_width = 3; + int ret; + + /* + * The BFPT table advertises a 512B page size but the page size is + * actually configurable (with the default being 256B). Read from + * CFR3V[4] and set the correct size. + */ + op = (struct spi_mem_op) + SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RD_ANY_REG, 1), + SPI_MEM_OP_ADDR(addr_width, SPINOR_REG_CYPRESS_CFR3V, 1), + SPI_MEM_OP_NO_DUMMY, + SPI_MEM_OP_DATA_IN(1, buf, 1)); + ret = spi_mem_exec_op(nor->spimem, &op); + if (ret) + return ret; + + if (*buf & SPINOR_REG_CYPRESS_CFR3V_PGSZ) + params->page_size = 512; + else + params->page_size = 256; + + return 0; +} + +static struct spi_nor_fixups s28hs512t_fixups = { + .default_init = s28hs512t_default_init, + .post_sfdp = s28hs512t_post_sfdp_fixup, + .post_bfpt = s28hs512t_post_bfpt_fixup, +}; + /* NOTE: double check command sets and memory organization when you add * more nor chips. This current list focusses on newer chips, which * have been converging on command sets which including JEDEC ID. @@ -2715,6 +2903,9 @@ static const struct flash_info spi_nor_ids[] = { { "s25fl064l", INFO(0x016017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "s25fl128l", INFO(0x016018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, { "s25fl256l", INFO(0x016019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) }, + { "s28hs512t", INFO(0x345b1a, 0, 256 * 1024, 256, SECT_4K | SPI_NOR_OCTAL_DTR_READ) + .fixups = &s28hs512t_fixups, + }, /* SST -- large erase sizes are "overlays", "sectors" are 4K */ { "sst25vf040b", INFO(0xbf258d, 0, 64 * 1024, 8, SECT_4K | SST_WRITE) }, diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index c653f6713cfc..e765272fc0f4 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -150,6 +150,20 @@ #define SR2_QUAD_EN_BIT1 BIT(1) #define SR2_QUAD_EN_BIT7 BIT(7) +/* For Cypress flash. */ +#define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */ +#define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */ +#define SPINOR_REG_CYPRESS_CFR2V 0x00800003 +#define SPINOR_REG_CYPRESS_CFR2V_MEMLAT_8_20 0x8 +#define SPINOR_REG_CYPRESS_CFR3N 0x00000004 +#define SPINOR_REG_CYPRESS_CFR3V 0x00800004 +#define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */ +#define SPINOR_REG_CYPRESS_CFR3N_UNISECT BIT(3) /* Uniform sector mode */ +#define SPINOR_REG_CYPRESS_CFR4V 0x00800005 +#define SPINOR_REG_CYPRESS_CFR5V 0x00800006 +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x3 +#define SPINOR_OP_CYPRESS_RD_FAST 0xee + /* Supported SPI protocols */ #define SNOR_PROTO_INST_MASK GENMASK(23, 16) #define SNOR_PROTO_INST_SHIFT 16