| Message ID | 20200315134416.16527-13-sam@ravnborg.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | dt-bindings: display: convert remaning panel bindings to DT Schema | expand |
sam, Reviewed-by: Vinay Simha BN <simhavcs@gmail.com> Thanks. On Sun, Mar 15, 2020 at 7:14 PM Sam Ravnborg <sam@ravnborg.org> wrote: > > Signed-off-by: Sam Ravnborg <sam@ravnborg.org> > Cc: Vinay Simha BN <simhavcs@gmail.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > --- > .../display/panel/jdi,lt070me05000.txt | 31 --------- > .../display/panel/jdi,lt070me05000.yaml | 69 +++++++++++++++++++ > 2 files changed, 69 insertions(+), 31 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > deleted file mode 100644 > index 4989c91d505f..000000000000 > --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > +++ /dev/null > @@ -1,31 +0,0 @@ > -JDI model LT070ME05000 1200x1920 7" DSI Panel > - > -Required properties: > -- compatible: should be "jdi,lt070me05000" > -- vddp-supply: phandle of the regulator that provides the supply voltage > - Power IC supply (3-5V) > -- iovcc-supply: phandle of the regulator that provides the supply voltage > - IOVCC , power supply for LCM (1.8V) > -- enable-gpios: phandle of gpio for enable line > - LED_EN, LED backlight enable, High active > -- reset-gpios: phandle of gpio for reset line > - This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names > - XRES, Reset, Low active > -- dcdc-en-gpios: phandle of the gpio for power ic line > - Power IC supply enable, High active > - > -Example: > - > - dsi0: qcom,mdss_dsi@4700000 { > - panel@0 { > - compatible = "jdi,lt070me05000"; > - reg = <0>; > - > - vddp-supply = <&pm8921_l17>; > - iovcc-supply = <&pm8921_lvs7>; > - > - enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; > - reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; > - dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml > new file mode 100644 > index 000000000000..e0abf68ecb19 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml > @@ -0,0 +1,69 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: JDI model LT070ME05000 1200x1920 7" DSI Panel > + > +maintainers: > + - Vinay Simha BN <simhavcs@gmail.com> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: jdi,lt070me05000 > + > + enable-gpios: true > + reg: true > + reset-gpios: true > + > + vddp-supply: > + description: | > + The regulator that provides the supply voltage Power IC supply (3-5V) > + > + iovcc-supply: > + description: | > + The regulator that provides the supply voltage IOVCC, > + power supply for LCM (1.8V) > + > + dcdc-en-gpios: > + description: | > + phandle of the gpio for power ic line > + Power IC supply enable, High active > + > +required: > + - compatible > + - reg > + - vddp-supply > + - iovcc-supply > + - enable-gpios > + - reset-gpios > + - dcdc-en-gpios > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + dsi: qcom,mdss_dsi@4700000 { > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel@0 { > + compatible = "jdi,lt070me05000"; > + reg = <0>; > + > + vddp-supply = <&pm8921_l17>; > + iovcc-supply = <&pm8921_lvs7>; > + > + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; > + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > +... > -- > 2.20.1 >
On Sun, Mar 15, 2020 at 02:43:52PM +0100, Sam Ravnborg wrote: > Signed-off-by: Sam Ravnborg <sam@ravnborg.org> > Cc: Vinay Simha BN <simhavcs@gmail.com> > Cc: Thierry Reding <thierry.reding@gmail.com> > Cc: Sam Ravnborg <sam@ravnborg.org> > --- > .../display/panel/jdi,lt070me05000.txt | 31 --------- > .../display/panel/jdi,lt070me05000.yaml | 69 +++++++++++++++++++ > 2 files changed, 69 insertions(+), 31 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > deleted file mode 100644 > index 4989c91d505f..000000000000 > --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt > +++ /dev/null > @@ -1,31 +0,0 @@ > -JDI model LT070ME05000 1200x1920 7" DSI Panel > - > -Required properties: > -- compatible: should be "jdi,lt070me05000" > -- vddp-supply: phandle of the regulator that provides the supply voltage > - Power IC supply (3-5V) > -- iovcc-supply: phandle of the regulator that provides the supply voltage > - IOVCC , power supply for LCM (1.8V) > -- enable-gpios: phandle of gpio for enable line > - LED_EN, LED backlight enable, High active > -- reset-gpios: phandle of gpio for reset line > - This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names > - XRES, Reset, Low active > -- dcdc-en-gpios: phandle of the gpio for power ic line > - Power IC supply enable, High active > - > -Example: > - > - dsi0: qcom,mdss_dsi@4700000 { > - panel@0 { > - compatible = "jdi,lt070me05000"; > - reg = <0>; > - > - vddp-supply = <&pm8921_l17>; > - iovcc-supply = <&pm8921_lvs7>; > - > - enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; > - reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; > - dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; > - }; > - }; > diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml > new file mode 100644 > index 000000000000..e0abf68ecb19 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml > @@ -0,0 +1,69 @@ > +# SPDX-License-Identifier: GPL-2.0 > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: JDI model LT070ME05000 1200x1920 7" DSI Panel > + > +maintainers: > + - Vinay Simha BN <simhavcs@gmail.com> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: jdi,lt070me05000 > + > + enable-gpios: true > + reg: true > + reset-gpios: true > + > + vddp-supply: > + description: | > + The regulator that provides the supply voltage Power IC supply (3-5V) > + > + iovcc-supply: > + description: | > + The regulator that provides the supply voltage IOVCC, > + power supply for LCM (1.8V) > + > + dcdc-en-gpios: > + description: | > + phandle of the gpio for power ic line > + Power IC supply enable, High active > + > +required: > + - compatible > + - reg > + - vddp-supply > + - iovcc-supply > + - enable-gpios > + - reset-gpios > + - dcdc-en-gpios > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + dsi: qcom,mdss_dsi@4700000 { dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel@0 { > + compatible = "jdi,lt070me05000"; > + reg = <0>; > + > + vddp-supply = <&pm8921_l17>; > + iovcc-supply = <&pm8921_lvs7>; > + > + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; > + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; > + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > +... > -- > 2.20.1 >
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt deleted file mode 100644 index 4989c91d505f..000000000000 --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt +++ /dev/null @@ -1,31 +0,0 @@ -JDI model LT070ME05000 1200x1920 7" DSI Panel - -Required properties: -- compatible: should be "jdi,lt070me05000" -- vddp-supply: phandle of the regulator that provides the supply voltage - Power IC supply (3-5V) -- iovcc-supply: phandle of the regulator that provides the supply voltage - IOVCC , power supply for LCM (1.8V) -- enable-gpios: phandle of gpio for enable line - LED_EN, LED backlight enable, High active -- reset-gpios: phandle of gpio for reset line - This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names - XRES, Reset, Low active -- dcdc-en-gpios: phandle of the gpio for power ic line - Power IC supply enable, High active - -Example: - - dsi0: qcom,mdss_dsi@4700000 { - panel@0 { - compatible = "jdi,lt070me05000"; - reg = <0>; - - vddp-supply = <&pm8921_l17>; - iovcc-supply = <&pm8921_lvs7>; - - enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; - reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; - dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; - }; - }; diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml new file mode 100644 index 000000000000..e0abf68ecb19 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: JDI model LT070ME05000 1200x1920 7" DSI Panel + +maintainers: + - Vinay Simha BN <simhavcs@gmail.com> + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: jdi,lt070me05000 + + enable-gpios: true + reg: true + reset-gpios: true + + vddp-supply: + description: | + The regulator that provides the supply voltage Power IC supply (3-5V) + + iovcc-supply: + description: | + The regulator that provides the supply voltage IOVCC, + power supply for LCM (1.8V) + + dcdc-en-gpios: + description: | + phandle of the gpio for power ic line + Power IC supply enable, High active + +required: + - compatible + - reg + - vddp-supply + - iovcc-supply + - enable-gpios + - reset-gpios + - dcdc-en-gpios + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + dsi: qcom,mdss_dsi@4700000 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "jdi,lt070me05000"; + reg = <0>; + + vddp-supply = <&pm8921_l17>; + iovcc-supply = <&pm8921_lvs7>; + + enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>; + dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>; + }; + }; + +...
Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Cc: Vinay Simha BN <simhavcs@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> --- .../display/panel/jdi,lt070me05000.txt | 31 --------- .../display/panel/jdi,lt070me05000.yaml | 69 +++++++++++++++++++ 2 files changed, 69 insertions(+), 31 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml