From patchwork Tue Jun 23 18:30:18 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Pratyush Yadav X-Patchwork-Id: 11621413 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 7FE536C1 for ; Tue, 23 Jun 2020 18:31:30 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 48B572082F for ; Tue, 23 Jun 2020 18:31:30 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (1024-bit key) header.d=ti.com header.i=@ti.com header.b="bJCNIN35" Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S2387610AbgFWSb2 (ORCPT ); Tue, 23 Jun 2020 14:31:28 -0400 Received: from lelv0143.ext.ti.com ([198.47.23.248]:58376 "EHLO lelv0143.ext.ti.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S2387592AbgFWSbX (ORCPT ); Tue, 23 Jun 2020 14:31:23 -0400 Received: from fllv0035.itg.ti.com ([10.64.41.0]) by lelv0143.ext.ti.com (8.15.2/8.15.2) with ESMTP id 05NIV2Jk085543; Tue, 23 Jun 2020 13:31:02 -0500 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=ti.com; s=ti-com-17Q1; t=1592937062; bh=RQcq4kUYlCYHV72iIGJXhx4KJh5WpX3HTphnn5V4KWQ=; h=From:To:CC:Subject:Date:In-Reply-To:References; b=bJCNIN35UGm9+TFHYwltbTKt/2LHqyfn3WpHPkqApoAnMIJSS9dtfUCJ1z5NatbBg 0QuPFIYArjexzYpqgOSdy0SJGklxTJoxGfzePAC7aXaW9qlSN0yee1XxbtVodHFKPa FCi5Ztpi2tJZiI/uh3ytFORCKbtN/1ZewztzYsRc= Received: from DFLE109.ent.ti.com (dfle109.ent.ti.com [10.64.6.30]) by fllv0035.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05NIV2d6041718; Tue, 23 Jun 2020 13:31:02 -0500 Received: from DFLE104.ent.ti.com (10.64.6.25) by DFLE109.ent.ti.com (10.64.6.30) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3; Tue, 23 Jun 2020 13:31:02 -0500 Received: from fllv0039.itg.ti.com (10.64.41.19) by DFLE104.ent.ti.com (10.64.6.25) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256_P256) id 15.1.1979.3 via Frontend Transport; Tue, 23 Jun 2020 13:31:01 -0500 Received: from pratyush-OptiPlex-790.dhcp.ti.com (ileax41-snat.itg.ti.com [10.172.224.153]) by fllv0039.itg.ti.com (8.15.2/8.15.2) with ESMTP id 05NIUVJJ000942; Tue, 23 Jun 2020 13:30:57 -0500 From: Pratyush Yadav To: Tudor Ambarus , Miquel Raynal , Richard Weinberger , Vignesh Raghavendra , Mark Brown , Nicolas Ferre , Alexandre Belloni , Ludovic Desroches , Matthias Brugger , Michal Simek , , , , , CC: Pratyush Yadav , Sekhar Nori , Boris Brezillon Subject: [PATCH v10 05/17] mtd: spi-nor: add support for DTR protocol Date: Wed, 24 Jun 2020 00:00:18 +0530 Message-ID: <20200623183030.26591-6-p.yadav@ti.com> X-Mailer: git-send-email 2.25.0 In-Reply-To: <20200623183030.26591-1-p.yadav@ti.com> References: <20200623183030.26591-1-p.yadav@ti.com> MIME-Version: 1.0 X-EXCLAIMER-MD-CONFIG: e1e8a2fd-e40a-4ac6-ac9b-f7e9cc9ee180 Sender: linux-spi-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org Double Transfer Rate (DTR) is SPI protocol in which data is transferred on each clock edge as opposed to on each clock cycle. Make framework-level changes to allow supporting flashes in DTR mode. Right now, mixed DTR modes are not supported. So, for example a mode like 4S-4D-4D will not work. All phases need to be either DTR or STR. Signed-off-by: Pratyush Yadav --- drivers/mtd/spi-nor/core.c | 305 ++++++++++++++++++++++++++++-------- drivers/mtd/spi-nor/core.h | 6 + drivers/mtd/spi-nor/sfdp.c | 9 +- include/linux/mtd/spi-nor.h | 51 ++++-- 4 files changed, 295 insertions(+), 76 deletions(-) diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c index 0369d98b2d12..22a3832b83a6 100644 --- a/drivers/mtd/spi-nor/core.c +++ b/drivers/mtd/spi-nor/core.c @@ -40,6 +40,76 @@ #define SPI_NOR_MAX_ADDR_WIDTH 4 +/** + * spi_nor_get_cmd_ext() - Get the command opcode extension based on the + * extension type. + * @nor: pointer to a 'struct spi_nor' + * @op: pointer to the 'struct spi_mem_op' whose properties + * need to be initialized. + * + * Right now, only "repeat" and "invert" are supported. + * + * Return: The opcode extension. + */ +static u8 spi_nor_get_cmd_ext(const struct spi_nor *nor, + const struct spi_mem_op *op) +{ + switch (nor->cmd_ext_type) { + case SPI_NOR_EXT_INVERT: + return ~op->cmd.opcode; + + case SPI_NOR_EXT_REPEAT: + return op->cmd.opcode; + + default: + dev_err(nor->dev, "Unknown command extension type\n"); + return 0; + } +} + +/** + * spi_nor_spimem_setup_op() - Set up common properties of a spi-mem op. + * @nor: pointer to a 'struct spi_nor' + * @op: pointer to the 'struct spi_mem_op' whose properties + * need to be initialized. + * @proto: the protocol from which the properties need to be set. + */ +void spi_nor_spimem_setup_op(const struct spi_nor *nor, + struct spi_mem_op *op, + const enum spi_nor_protocol proto) +{ + u8 ext; + + op->cmd.buswidth = spi_nor_get_protocol_inst_nbits(proto); + + if (op->addr.nbytes) + op->addr.buswidth = spi_nor_get_protocol_addr_nbits(proto); + + if (op->dummy.nbytes) + op->dummy.buswidth = spi_nor_get_protocol_addr_nbits(proto); + + if (op->data.nbytes) + op->data.buswidth = spi_nor_get_protocol_data_nbits(proto); + + if (spi_nor_protocol_is_dtr(proto)) { + /* + * spi-mem supports mixed DTR modes, but right now we can only + * have all phases either DTR or STR. IOW, spi-mem can have + * something like 4S-4D-4D, but spi-nor can't. So, set all 4 + * phases to either DTR or STR. + */ + op->cmd.dtr = op->addr.dtr = op->dummy.dtr + = op->data.dtr = true; + + /* 2 bytes per clock cycle in DTR mode. */ + op->dummy.nbytes *= 2; + + ext = spi_nor_get_cmd_ext(nor, op); + op->cmd.opcode = (op->cmd.opcode << 8) | ext; + op->cmd.nbytes = 2; + } +} + /** * spi_nor_spimem_bounce() - check if a bounce buffer is needed for the data * transfer @@ -104,14 +174,12 @@ static ssize_t spi_nor_spimem_read_data(struct spi_nor *nor, loff_t from, ssize_t nbytes; int error; - /* get transfer protocols. */ - op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); - op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); - op.dummy.buswidth = op.addr.buswidth; - op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); + spi_nor_spimem_setup_op(nor, &op, nor->read_proto); /* convert the dummy cycles to the number of bytes */ op.dummy.nbytes = (nor->read_dummy * op.dummy.buswidth) / 8; + if (spi_nor_protocol_is_dtr(nor->read_proto)) + op.dummy.nbytes *= 2; usebouncebuf = spi_nor_spimem_bounce(nor, &op); @@ -169,13 +237,11 @@ static ssize_t spi_nor_spimem_write_data(struct spi_nor *nor, loff_t to, ssize_t nbytes; int error; - op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); - op.addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); - op.data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); - if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) op.addr.nbytes = 0; + spi_nor_spimem_setup_op(nor, &op, nor->write_proto); + if (spi_nor_spimem_bounce(nor, &op)) memcpy(nor->bouncebuf, buf, op.data.nbytes); @@ -227,10 +293,16 @@ int spi_nor_write_enable(struct spi_nor *nor) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREN, - NULL, 0); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->write_reg(nor, + SPINOR_OP_WREN, + NULL, 0); } if (ret) @@ -256,10 +328,16 @@ int spi_nor_write_disable(struct spi_nor *nor) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRDI, - NULL, 0); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->write_reg(nor, + SPINOR_OP_WRDI, + NULL, 0); } if (ret) @@ -318,10 +396,15 @@ static int spi_nor_read_fsr(struct spi_nor *nor, u8 *fsr) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_IN(1, fsr, 1)); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDFSR, - fsr, 1); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDFSR, + fsr, 1); } if (ret) @@ -350,9 +433,15 @@ static int spi_nor_read_cr(struct spi_nor *nor, u8 *cr) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_IN(1, cr, 1)); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDCR, cr, 1); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDCR, + cr, 1); } if (ret) @@ -383,12 +472,17 @@ int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->write_reg(nor, - enable ? SPINOR_OP_EN4B : - SPINOR_OP_EX4B, - NULL, 0); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->write_reg(nor, + enable ? SPINOR_OP_EN4B : + SPINOR_OP_EX4B, + NULL, 0); } if (ret) @@ -419,10 +513,15 @@ static int spansion_set_4byte_addr_mode(struct spi_nor *nor, bool enable) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->write_reg(nor, SPINOR_OP_BRWR, - nor->bouncebuf, 1); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->write_reg(nor, SPINOR_OP_BRWR, + nor->bouncebuf, 1); } if (ret) @@ -451,10 +550,16 @@ int spi_nor_write_ear(struct spi_nor *nor, u8 ear) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_OUT(1, nor->bouncebuf, 1)); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WREAR, - nor->bouncebuf, 1); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->write_reg(nor, + SPINOR_OP_WREAR, + nor->bouncebuf, 1); } if (ret) @@ -482,10 +587,16 @@ int spi_nor_xread_sr(struct spi_nor *nor, u8 *sr) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_IN(1, sr, 1)); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->read_reg(nor, SPINOR_OP_XRDSR, - sr, 1); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->read_reg(nor, + SPINOR_OP_XRDSR, + sr, 1); } if (ret) @@ -527,10 +638,16 @@ static void spi_nor_clear_sr(struct spi_nor *nor) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLSR, - NULL, 0); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->write_reg(nor, + SPINOR_OP_CLSR, + NULL, 0); } if (ret) @@ -591,10 +708,16 @@ static void spi_nor_clear_fsr(struct spi_nor *nor) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CLFSR, - NULL, 0); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->write_reg(nor, + SPINOR_OP_CLFSR, + NULL, 0); } if (ret) @@ -735,10 +858,16 @@ static int spi_nor_write_sr(struct spi_nor *nor, const u8 *sr, size_t len) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_OUT(len, sr, 1)); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR, - sr, len); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->write_reg(nor, + SPINOR_OP_WRSR, + sr, len); } if (ret) { @@ -937,10 +1066,16 @@ static int spi_nor_write_sr2(struct spi_nor *nor, const u8 *sr2) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_OUT(1, sr2, 1)); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->write_reg(nor, SPINOR_OP_WRSR2, - sr2, 1); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->write_reg(nor, + SPINOR_OP_WRSR2, + sr2, 1); } if (ret) { @@ -971,10 +1106,16 @@ static int spi_nor_read_sr2(struct spi_nor *nor, u8 *sr2) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_IN(1, sr2, 1)); + spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->read_reg(nor, SPINOR_OP_RDSR2, - sr2, 1); + if (spi_nor_protocol_is_dtr(nor->reg_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->read_reg(nor, + SPINOR_OP_RDSR2, + sr2, 1); } if (ret) @@ -1002,10 +1143,16 @@ static int spi_nor_erase_chip(struct spi_nor *nor) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); + spi_nor_spimem_setup_op(nor, &op, nor->write_proto); + ret = spi_mem_exec_op(nor->spimem, &op); } else { - ret = nor->controller_ops->write_reg(nor, SPINOR_OP_CHIP_ERASE, - NULL, 0); + if (spi_nor_protocol_is_dtr(nor->write_proto)) + ret = -ENOTSUPP; + else + ret = nor->controller_ops->write_reg(nor, + SPINOR_OP_CHIP_ERASE, + NULL, 0); } if (ret) @@ -1144,7 +1291,11 @@ static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr) SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_NO_DATA); + spi_nor_spimem_setup_op(nor, &op, nor->write_proto); + return spi_mem_exec_op(nor->spimem, &op); + } else if (spi_nor_protocol_is_dtr(nor->write_proto)) { + return -ENOTSUPP; } else if (nor->controller_ops->erase) { return nor->controller_ops->erase(nor, addr); } @@ -2253,6 +2404,7 @@ int spi_nor_hwcaps_read2cmd(u32 hwcaps) { SNOR_HWCAPS_READ_1_8_8, SNOR_CMD_READ_1_8_8 }, { SNOR_HWCAPS_READ_8_8_8, SNOR_CMD_READ_8_8_8 }, { SNOR_HWCAPS_READ_1_8_8_DTR, SNOR_CMD_READ_1_8_8_DTR }, + { SNOR_HWCAPS_READ_8_8_8_DTR, SNOR_CMD_READ_8_8_8_DTR }, }; return spi_nor_hwcaps2cmd(hwcaps, hwcaps_read2cmd, @@ -2269,6 +2421,7 @@ static int spi_nor_hwcaps_pp2cmd(u32 hwcaps) { SNOR_HWCAPS_PP_1_1_8, SNOR_CMD_PP_1_1_8 }, { SNOR_HWCAPS_PP_1_8_8, SNOR_CMD_PP_1_8_8 }, { SNOR_HWCAPS_PP_8_8_8, SNOR_CMD_PP_8_8_8 }, + { SNOR_HWCAPS_PP_8_8_8_DTR, SNOR_CMD_PP_8_8_8_DTR }, }; return spi_nor_hwcaps2cmd(hwcaps, hwcaps_pp2cmd, @@ -2322,13 +2475,11 @@ static int spi_nor_spimem_check_readop(struct spi_nor *nor, SPI_MEM_OP_DUMMY(0, 1), SPI_MEM_OP_DATA_IN(0, NULL, 1)); - op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(read->proto); - op.addr.buswidth = spi_nor_get_protocol_addr_nbits(read->proto); - op.data.buswidth = spi_nor_get_protocol_data_nbits(read->proto); - op.dummy.buswidth = op.addr.buswidth; op.dummy.nbytes = (read->num_mode_clocks + read->num_wait_states) * op.dummy.buswidth / 8; + spi_nor_spimem_setup_op(nor, &op, read->proto); + return spi_nor_spimem_check_op(nor, &op); } @@ -2348,9 +2499,7 @@ static int spi_nor_spimem_check_pp(struct spi_nor *nor, SPI_MEM_OP_NO_DUMMY, SPI_MEM_OP_DATA_OUT(0, NULL, 1)); - op.cmd.buswidth = spi_nor_get_protocol_inst_nbits(pp->proto); - op.addr.buswidth = spi_nor_get_protocol_addr_nbits(pp->proto); - op.data.buswidth = spi_nor_get_protocol_data_nbits(pp->proto); + spi_nor_spimem_setup_op(nor, &op, pp->proto); return spi_nor_spimem_check_op(nor, &op); } @@ -2368,12 +2517,16 @@ spi_nor_spimem_adjust_hwcaps(struct spi_nor *nor, u32 *hwcaps) struct spi_nor_flash_parameter *params = nor->params; unsigned int cap; - /* DTR modes are not supported yet, mask them all. */ - *hwcaps &= ~SNOR_HWCAPS_DTR; - /* X-X-X modes are not supported yet, mask them all. */ *hwcaps &= ~SNOR_HWCAPS_X_X_X; + /* + * If the reset line is broken, we do not want to enter a stateful + * mode. + */ + if (nor->flags & SNOR_F_BROKEN_RESET) + *hwcaps &= ~(SNOR_HWCAPS_X_X_X | SNOR_HWCAPS_X_X_X_DTR); + for (cap = 0; cap < sizeof(*hwcaps) * BITS_PER_BYTE; cap++) { int rdidx, ppidx; @@ -2628,7 +2781,7 @@ static int spi_nor_default_setup(struct spi_nor *nor, * controller directly implements the spi_nor interface. * Yet another reason to switch to spi-mem. */ - ignored_mask = SNOR_HWCAPS_X_X_X; + ignored_mask = SNOR_HWCAPS_X_X_X | SNOR_HWCAPS_X_X_X_DTR; if (shared_mask & ignored_mask) { dev_dbg(nor->dev, "SPI n-n-n protocols are not supported.\n"); @@ -2774,11 +2927,25 @@ static void spi_nor_info_init_params(struct spi_nor *nor) SNOR_PROTO_1_1_8); } + if (info->flags & SPI_NOR_OCTAL_DTR_READ) { + params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR; + spi_nor_set_read_settings(¶ms->reads[SNOR_CMD_READ_8_8_8_DTR], + 0, 20, SPINOR_OP_READ_FAST, + SNOR_PROTO_8_8_8_DTR); + } + /* Page Program settings. */ params->hwcaps.mask |= SNOR_HWCAPS_PP; spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP], SPINOR_OP_PP, SNOR_PROTO_1_1_1); + /* + * Since xSPI Page Program opcode is backward compatible with + * Legacy SPI, use Legacy SPI opcode there as well. + */ + spi_nor_set_pp_settings(¶ms->page_programs[SNOR_CMD_PP_8_8_8_DTR], + SPINOR_OP_PP, SNOR_PROTO_8_8_8_DTR); + /* * Sector Erase settings. Sort Erase Types in ascending order, with the * smallest erase size starting at BIT(0). @@ -2886,7 +3053,8 @@ static int spi_nor_init_params(struct spi_nor *nor) spi_nor_manufacturer_init_params(nor); - if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ)) && + if ((nor->info->flags & (SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_OCTAL_READ | SPI_NOR_OCTAL_DTR_READ)) && !(nor->info->flags & SPI_NOR_SKIP_SFDP)) spi_nor_sfdp_init_params(nor); @@ -2948,7 +3116,9 @@ static int spi_nor_init(struct spi_nor *nor) return err; } - if (nor->addr_width == 4 && !(nor->flags & SNOR_F_4B_OPCODES)) { + if (nor->addr_width == 4 && + !(nor->info->flags & SPI_NOR_OCTAL_DTR_READ) && + !(nor->flags & SNOR_F_4B_OPCODES)) { /* * If the RESET# pin isn't hooked up properly, or the system * otherwise doesn't perform a reset command in the boot @@ -3007,6 +3177,9 @@ static int spi_nor_set_addr_width(struct spi_nor *nor) { if (nor->addr_width) { /* already configured from SFDP */ + } else if (spi_nor_protocol_is_dtr(nor->read_proto)) { + /* Always use 4-byte addresses in DTR mode. */ + nor->addr_width = 4; } else if (nor->info->addr_width) { nor->addr_width = nor->info->addr_width; } else if (nor->mtd.size > 0x1000000) { @@ -3244,14 +3417,19 @@ static int spi_nor_create_read_dirmap(struct spi_nor *nor) }; struct spi_mem_op *op = &info.op_tmpl; - /* get transfer protocols. */ - op->cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->read_proto); - op->addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->read_proto); - op->dummy.buswidth = op->addr.buswidth; - op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); + spi_nor_spimem_setup_op(nor, op, nor->read_proto); /* convert the dummy cycles to the number of bytes */ op->dummy.nbytes = (nor->read_dummy * op->dummy.buswidth) / 8; + if (spi_nor_protocol_is_dtr(nor->read_proto)) + op->dummy.nbytes *= 2; + + /* + * Since spi_nor_spimem_setup_op() only sets buswidth when the number + * of data bytes is non-zero, the data buswidth won't be set here. So, + * do it explicitly. + */ + op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->read_proto); nor->dirmap.rdesc = devm_spi_mem_dirmap_create(nor->dev, nor->spimem, &info); @@ -3270,15 +3448,18 @@ static int spi_nor_create_write_dirmap(struct spi_nor *nor) }; struct spi_mem_op *op = &info.op_tmpl; - /* get transfer protocols. */ - op->cmd.buswidth = spi_nor_get_protocol_inst_nbits(nor->write_proto); - op->addr.buswidth = spi_nor_get_protocol_addr_nbits(nor->write_proto); - op->dummy.buswidth = op->addr.buswidth; - op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); - if (nor->program_opcode == SPINOR_OP_AAI_WP && nor->sst_write_second) op->addr.nbytes = 0; + spi_nor_spimem_setup_op(nor, op, nor->write_proto); + + /* + * Since spi_nor_spimem_setup_op() only sets buswidth when the number + * of data bytes is non-zero, the data buswidth won't be set here. So, + * do it explicitly. + */ + op->data.buswidth = spi_nor_get_protocol_data_nbits(nor->write_proto); + nor->dirmap.wdesc = devm_spi_mem_dirmap_create(nor->dev, nor->spimem, &info); return PTR_ERR_OR_ZERO(nor->dirmap.wdesc); diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h index 6f2f6b27173f..de1e3917889f 100644 --- a/drivers/mtd/spi-nor/core.h +++ b/drivers/mtd/spi-nor/core.h @@ -62,6 +62,7 @@ enum spi_nor_read_command_index { SNOR_CMD_READ_1_8_8, SNOR_CMD_READ_8_8_8, SNOR_CMD_READ_1_8_8_DTR, + SNOR_CMD_READ_8_8_8_DTR, SNOR_CMD_READ_MAX }; @@ -78,6 +79,7 @@ enum spi_nor_pp_command_index { SNOR_CMD_PP_1_1_8, SNOR_CMD_PP_1_8_8, SNOR_CMD_PP_8_8_8, + SNOR_CMD_PP_8_8_8_DTR, SNOR_CMD_PP_MAX }; @@ -311,6 +313,7 @@ struct flash_info { * BP3 is bit 6 of status register. * Must be used with SPI_NOR_4BIT_BP. */ +#define SPI_NOR_OCTAL_DTR_READ BIT(19) /* Flash supports octal DTR Read. */ /* Part specific fixup hooks. */ const struct spi_nor_fixups *fixups; @@ -399,6 +402,9 @@ extern const struct spi_nor_manufacturer spi_nor_winbond; extern const struct spi_nor_manufacturer spi_nor_xilinx; extern const struct spi_nor_manufacturer spi_nor_xmc; +void spi_nor_spimem_setup_op(const struct spi_nor *nor, + struct spi_mem_op *op, + const enum spi_nor_protocol proto); int spi_nor_write_enable(struct spi_nor *nor); int spi_nor_write_disable(struct spi_nor *nor); int spi_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable); diff --git a/drivers/mtd/spi-nor/sfdp.c b/drivers/mtd/spi-nor/sfdp.c index 55c0c508464b..cb6e93a3560a 100644 --- a/drivers/mtd/spi-nor/sfdp.c +++ b/drivers/mtd/spi-nor/sfdp.c @@ -1046,9 +1046,16 @@ static int spi_nor_parse_4bait(struct spi_nor *nor, } /* 4BAIT is the only SFDP table that indicates page program support. */ - if (pp_hwcaps & SNOR_HWCAPS_PP) + if (pp_hwcaps & SNOR_HWCAPS_PP) { spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP], SPINOR_OP_PP_4B, SNOR_PROTO_1_1_1); + /* + * Since xSPI Page Program opcode is backward compatible with + * Legacy SPI, use Legacy SPI opcode there as well. + */ + spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_8_8_8_DTR], + SPINOR_OP_PP_4B, SNOR_PROTO_8_8_8_DTR); + } if (pp_hwcaps & SNOR_HWCAPS_PP_1_1_4) spi_nor_set_pp_settings(¶ms_pp[SNOR_CMD_PP_1_1_4], SPINOR_OP_PP_1_1_4_4B, diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index 60bac2c0ec45..cd549042c53d 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -182,6 +182,7 @@ enum spi_nor_protocol { SNOR_PROTO_1_2_2_DTR = SNOR_PROTO_DTR(1, 2, 2), SNOR_PROTO_1_4_4_DTR = SNOR_PROTO_DTR(1, 4, 4), SNOR_PROTO_1_8_8_DTR = SNOR_PROTO_DTR(1, 8, 8), + SNOR_PROTO_8_8_8_DTR = SNOR_PROTO_DTR(8, 8, 8), }; static inline bool spi_nor_protocol_is_dtr(enum spi_nor_protocol proto) @@ -228,7 +229,7 @@ struct spi_nor_hwcaps { * then Quad SPI protocols before Dual SPI protocols, Fast Read and lastly * (Slow) Read. */ -#define SNOR_HWCAPS_READ_MASK GENMASK(14, 0) +#define SNOR_HWCAPS_READ_MASK GENMASK(15, 0) #define SNOR_HWCAPS_READ BIT(0) #define SNOR_HWCAPS_READ_FAST BIT(1) #define SNOR_HWCAPS_READ_1_1_1_DTR BIT(2) @@ -245,11 +246,12 @@ struct spi_nor_hwcaps { #define SNOR_HWCAPS_READ_4_4_4 BIT(9) #define SNOR_HWCAPS_READ_1_4_4_DTR BIT(10) -#define SNOR_HWCAPS_READ_OCTAL GENMASK(14, 11) +#define SNOR_HWCAPS_READ_OCTAL GENMASK(15, 11) #define SNOR_HWCAPS_READ_1_1_8 BIT(11) #define SNOR_HWCAPS_READ_1_8_8 BIT(12) #define SNOR_HWCAPS_READ_8_8_8 BIT(13) #define SNOR_HWCAPS_READ_1_8_8_DTR BIT(14) +#define SNOR_HWCAPS_READ_8_8_8_DTR BIT(15) /* * Page Program capabilities. @@ -260,18 +262,19 @@ struct spi_nor_hwcaps { * JEDEC/SFDP standard to define them. Also at this moment no SPI flash memory * implements such commands. */ -#define SNOR_HWCAPS_PP_MASK GENMASK(22, 16) -#define SNOR_HWCAPS_PP BIT(16) +#define SNOR_HWCAPS_PP_MASK GENMASK(23, 16) +#define SNOR_HWCAPS_PP BIT(16) -#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17) -#define SNOR_HWCAPS_PP_1_1_4 BIT(17) -#define SNOR_HWCAPS_PP_1_4_4 BIT(18) -#define SNOR_HWCAPS_PP_4_4_4 BIT(19) +#define SNOR_HWCAPS_PP_QUAD GENMASK(19, 17) +#define SNOR_HWCAPS_PP_1_1_4 BIT(17) +#define SNOR_HWCAPS_PP_1_4_4 BIT(18) +#define SNOR_HWCAPS_PP_4_4_4 BIT(19) -#define SNOR_HWCAPS_PP_OCTAL GENMASK(22, 20) -#define SNOR_HWCAPS_PP_1_1_8 BIT(20) -#define SNOR_HWCAPS_PP_1_8_8 BIT(21) -#define SNOR_HWCAPS_PP_8_8_8 BIT(22) +#define SNOR_HWCAPS_PP_OCTAL GENMASK(23, 20) +#define SNOR_HWCAPS_PP_1_1_8 BIT(20) +#define SNOR_HWCAPS_PP_1_8_8 BIT(21) +#define SNOR_HWCAPS_PP_8_8_8 BIT(22) +#define SNOR_HWCAPS_PP_8_8_8_DTR BIT(23) #define SNOR_HWCAPS_X_X_X (SNOR_HWCAPS_READ_2_2_2 | \ SNOR_HWCAPS_READ_4_4_4 | \ @@ -279,10 +282,14 @@ struct spi_nor_hwcaps { SNOR_HWCAPS_PP_4_4_4 | \ SNOR_HWCAPS_PP_8_8_8) +#define SNOR_HWCAPS_X_X_X_DTR (SNOR_HWCAPS_READ_8_8_8_DTR | \ + SNOR_HWCAPS_PP_8_8_8_DTR) + #define SNOR_HWCAPS_DTR (SNOR_HWCAPS_READ_1_1_1_DTR | \ SNOR_HWCAPS_READ_1_2_2_DTR | \ SNOR_HWCAPS_READ_1_4_4_DTR | \ - SNOR_HWCAPS_READ_1_8_8_DTR) + SNOR_HWCAPS_READ_1_8_8_DTR | \ + SNOR_HWCAPS_READ_8_8_8_DTR) #define SNOR_HWCAPS_ALL (SNOR_HWCAPS_READ_MASK | \ SNOR_HWCAPS_PP_MASK) @@ -318,6 +325,22 @@ struct spi_nor_controller_ops { int (*erase)(struct spi_nor *nor, loff_t offs); }; +/** + * enum spi_nor_cmd_ext - describes the command opcode extension in DTR mode + * @SPI_NOR_EXT_NONE: no extension. This is the default, and is used in Legacy + * SPI mode + * @SPI_NOR_EXT_REPEAT: the extension is same as the opcode + * @SPI_NOR_EXT_INVERT: the extension is the bitwise inverse of the opcode + * @SPI_NOR_EXT_HEX: the extension is any hex value. The command and opcode + * combine to form a 16-bit opcode. + */ +enum spi_nor_cmd_ext { + SPI_NOR_EXT_NONE = 0, + SPI_NOR_EXT_REPEAT, + SPI_NOR_EXT_INVERT, + SPI_NOR_EXT_HEX, +}; + /* * Forward declarations that are used internally by the core and manufacturer * drivers. @@ -345,6 +368,7 @@ struct spi_nor_flash_parameter; * @program_opcode: the program opcode * @sst_write_second: used by the SST write operation * @flags: flag options for the current SPI NOR (SNOR_F_*) + * @cmd_ext_type: the command opcode extension type for DTR mode. * @read_proto: the SPI protocol for read operations * @write_proto: the SPI protocol for write operations * @reg_proto: the SPI protocol for read_reg/write_reg/erase operations @@ -376,6 +400,7 @@ struct spi_nor { enum spi_nor_protocol reg_proto; bool sst_write_second; u32 flags; + enum spi_nor_cmd_ext cmd_ext_type; const struct spi_nor_controller_ops *controller_ops;