From patchwork Sun Sep 20 11:28:58 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Serge Semin X-Patchwork-Id: 11787493 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id B2278139A for ; Sun, 20 Sep 2020 11:30:06 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id A225D20EDD for ; Sun, 20 Sep 2020 11:30:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726390AbgITLaF (ORCPT ); Sun, 20 Sep 2020 07:30:05 -0400 Received: from mail.baikalelectronics.com ([87.245.175.226]:53710 "EHLO mail.baikalelectronics.ru" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1726472AbgITL3r (ORCPT ); Sun, 20 Sep 2020 07:29:47 -0400 Received: from localhost (unknown [127.0.0.1]) by mail.baikalelectronics.ru (Postfix) with ESMTP id C588B800254B; Sun, 20 Sep 2020 11:29:32 +0000 (UTC) X-Virus-Scanned: amavisd-new at baikalelectronics.ru Received: from mail.baikalelectronics.ru ([127.0.0.1]) by localhost (mail.baikalelectronics.ru [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id AJ5YZNwkhzYN; Sun, 20 Sep 2020 14:29:32 +0300 (MSK) From: Serge Semin To: Mark Brown CC: Serge Semin , Serge Semin , Alexey Malahov , Ramil Zaripov , Pavel Parkhomenko , Andy Shevchenko , Andy Shevchenko , Lars Povlsen , "wuxu . wu" , Feng Tang , Rob Herring , , , Subject: [PATCH 14/30] spi: dw: Simplify the SPI bus speed config procedure Date: Sun, 20 Sep 2020 14:28:58 +0300 Message-ID: <20200920112914.26501-15-Sergey.Semin@baikalelectronics.ru> In-Reply-To: <20200920112914.26501-1-Sergey.Semin@baikalelectronics.ru> References: <20200920112914.26501-1-Sergey.Semin@baikalelectronics.ru> MIME-Version: 1.0 X-ClientProxiedBy: MAIL.baikal.int (192.168.51.25) To mail (192.168.51.25) Precedence: bulk List-ID: X-Mailing-List: linux-spi@vger.kernel.org The code currently responsible for the SPI communication speed setting up is a bit messy. Most likely for some historical reason the bus frequency is saved in the peripheral chip private data. It's pointless now since the custom communication speed is a SPI-transfer-specific thing and only if there is no SPI transfer data specified (like during the SPI memory operations) it can be taken from the SPI device structure. But even in the later case there is no point in having the clock divider and the SPI bus frequency saved in the chip data, because the controller can be used for both SPI-transfer-based and SPI-transfer-less communications. From software point of view keeping the current clock divider in an SPI-device specific storage may give a small performance gain (to avoid sometimes a round-up division), but in comparison to the total SPI transfer time it just doesn't worth saving a few CPU cycles in comparison to the total SPI transfer time while having the harder to read code. The only optimization, which could worth preserving in the code is to avoid unnecessary DW SPI controller registers update if it's possible. So to speak let's simplify the SPI communication speed update procedure by removing the clock-related fields from the peripheral chip data and update the DW SPI clock divider only if it's really changed. The later change is reached by keeping the effective SPI bus speed in the internal DW SPI private data. Signed-off-by: Serge Semin --- drivers/spi/spi-dw-core.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c index 0b80a16d9872..92138a6ada12 100644 --- a/drivers/spi/spi-dw-core.c +++ b/drivers/spi/spi-dw-core.c @@ -24,9 +24,6 @@ struct chip_data { u8 tmode; /* TR/TO/RO/EEPROM */ - u16 clk_div; /* baud rate divider */ - u32 speed_hz; /* baud rate */ - u32 cr0; u32 rx_sample_dly; /* RX sample delay */ }; @@ -256,6 +253,8 @@ static void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, { struct chip_data *chip = spi_get_ctldata(spi); u32 cr0 = chip->cr0; + u32 speed_hz; + u16 clk_div; cr0 |= (transfer->bits_per_word - 1); @@ -266,15 +265,13 @@ static void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi, dw_writel(dws, DW_SPI_CTRLR0, cr0); - /* Handle per transfer options for bpw and speed */ - if (transfer->speed_hz != dws->current_freq) { - if (transfer->speed_hz != chip->speed_hz) { - /* clk_div doesn't support odd number */ - chip->clk_div = (DIV_ROUND_UP(dws->max_freq, transfer->speed_hz) + 1) & 0xfffe; - chip->speed_hz = transfer->speed_hz; - } - dws->current_freq = transfer->speed_hz; - spi_set_clk(dws, chip->clk_div); + /* Note DW APB SSI clock divider doesn't support odd numbers */ + clk_div = (DIV_ROUND_UP(dws->max_freq, transfer->speed_hz) + 1) & 0xfffe; + speed_hz = dws->max_freq / clk_div; + + if (dws->current_freq != speed_hz) { + spi_set_clk(dws, clk_div); + dws->current_freq = speed_hz; } } @@ -302,7 +299,7 @@ static int dw_spi_transfer_one(struct spi_controller *master, dw_spi_update_config(dws, spi, transfer); - transfer->effective_speed_hz = dws->max_freq / chip->clk_div; + transfer->effective_speed_hz = dws->current_freq; /* Check if current transfer is a DMA transaction */ if (master->can_dma && master->can_dma(master, spi, transfer))