diff mbox series

[v4,06/21] spi: dw: Update Rx sample delay in the config function

Message ID 20201007235511.4935-7-Sergey.Semin@baikalelectronics.ru (mailing list archive)
State New, archived
Headers show
Series spi: dw: Add full Baikal-T1 SPI Controllers support | expand

Commit Message

Serge Semin Oct. 7, 2020, 11:54 p.m. UTC 
Rx sample delay can be SPI device specific, and should be synchronously
initialized with the rest of the communication and peripheral device
related controller setups. So let's move the Rx-sample delay setup into
the DW APB SSI configuration update method.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
---
 drivers/spi/spi-dw-core.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/drivers/spi/spi-dw-core.c b/drivers/spi/spi-dw-core.c
index cc341080d1a4..12080ea2ad84 100644
--- a/drivers/spi/spi-dw-core.c
+++ b/drivers/spi/spi-dw-core.c
@@ -294,13 +294,18 @@  static void dw_spi_update_config(struct dw_spi *dws, struct spi_device *spi,
 		spi_set_clk(dws, clk_div);
 		dws->current_freq = speed_hz;
 	}
+
+	/* Update RX sample delay if required */
+	if (dws->cur_rx_sample_dly != chip->rx_sample_dly) {
+		dw_writel(dws, DW_SPI_RX_SAMPLE_DLY, chip->rx_sample_dly);
+		dws->cur_rx_sample_dly = chip->rx_sample_dly;
+	}
 }
 
 static int dw_spi_transfer_one(struct spi_controller *master,
 		struct spi_device *spi, struct spi_transfer *transfer)
 {
 	struct dw_spi *dws = spi_controller_get_devdata(master);
-	struct chip_data *chip = spi_get_ctldata(spi);
 	u8 imask = 0;
 	u16 txlevel = 0;
 	int ret;
@@ -326,12 +331,6 @@  static int dw_spi_transfer_one(struct spi_controller *master,
 	if (master->can_dma && master->can_dma(master, spi, transfer))
 		dws->dma_mapped = master->cur_msg_mapped;
 
-	/* Update RX sample delay if required */
-	if (dws->cur_rx_sample_dly != chip->rx_sample_dly) {
-		dw_writel(dws, DW_SPI_RX_SAMPLE_DLY, chip->rx_sample_dly);
-		dws->cur_rx_sample_dly = chip->rx_sample_dly;
-	}
-
 	/* For poll mode just disable all interrupts */
 	spi_mask_intr(dws, 0xff);